Analysis of derivatized and underivatized theanine enantiomers by high-performance liquid chromatography/atmospheric pressure ionization-mass spectrometry

Theanine, a naturally occurring non-proteinic amino acid found in tea leaves, has demonstrated wide-ranging physiological activity, from lowering blood pressure to enhancing the anti-tumor activity of chemotherapeutic drugs. The chiral nature of theanine suggests that enantiospecificity plays a significant role in its various pharmacological functions. Using the Chirobiotic T (teicoplanin) chiral stationary phase, native and derivatized theanine enantiomers were separated and detected via high-performance liquid chromatography (HPLC) coupled to atmospheric pressure ionization mass spectrometry (API-MS). With the use of flow rates compatible with each ionization source, native theanine standards achieved excellent sensitivity and detection limits (10 ng/mL) for both atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI). Optimum sensitivity and detection limits for derivatized theanine standards were achieved using ESI-MS. The enantiomeric composition of six commercially available L-theanine samples was evaluated using the high-flow APCI-MS method and confirmed with photodiode array detection. Five of the six products contained significant amounts of D-theanine. Only one product, SunTheanine, appeared to contain only the L-theanine enantiomer.     

Modeling of transient electroluminescence overshoot in bilayer organic light-emitting diodes using rate equations

When a voltage pulse is applied under forward biased condition to a spin-coated bilayer organic light-emitting diode (OLED), then initially the electroluminescence (EL) intensity appearing after a delay time, increases with time and later on it attains a saturation value. At the end of the voltage pulse, the EL intensity decreases with time, attains a minimum intensity and then it again increases with time, attains a peak value and later on it decreases with time. For the OLEDs, in which the lifetime of trapped carriers is less than the decay time of the EL occurring prior to the onset of overshoot, the EL overshoot begins just after the end of voltage pulse. The overshoot in spin-coated bilayer OLEDs is caused by the presence of an interfacial layer of finite thickness between hole and electron transporting layers in which both transport molecules coexist, whereby the interfacial energy barrier impedes both hole and electron passage. When a voltage pulse is applied to a bilayer OLED, positive and negative space charges are established at the opposite faces of the interfacial layer. Subsequently, the charge recombination occurs with the incoming flux of injected carriers of opposite polarity. When the voltage is turned off, the interfacial charges recombine under the action of their mutual electric field. Thus, after switching off the external voltage the electrons stored in the interface next to the anode cell compartment experience an electric field directed from cathode to anode, and therefore, the electrons move towards the cathode, that is, towards the positive space charge, whereby electron–hole recombination gives rise to luminescence. The EL prior to onset of overshoot is caused by the movement of electrons in the electron transporting states, however, the EL in the overshoot region is caused by the movement of detrapped electrons. On the basis of the rate equations for the detrapping and recombination of charge carriers accumulated at the interface expressions are derived for the transient EL intensity I, time t_m and intensity I_m corresponding to the peak of EL overshoot, total EL intensity I_t and decay of the intensity of EL overshoot. In fact, the decay prior to the onset of EL overshoot is the decay of number of electrons moving in the electron transporting states. The ratio I_m/I_s decreases with increasing value of the applied pulse voltage because I_m increases linearly with the amplitude of applied voltage pulse and I_s increases nonlinearly and rapidly with the increasing amplitude of applied voltage pulse. The lifetime τ_t of electrons at the interface decreases with increasing temperature whereby the dependence of τ_t on temperature follows Arrhenius plot. This fact indicates that the detrapping involves thermally-assisted tunneling of electrons. Using the EL overshoot in bilayer OLEDs, the lifetime of the charge carriers at the interface, recombination time of charge carriers, decay time of the EL prior to onset of overshoot, and the time delay between the voltage pulse and onset time of the EL overshoot can be determined. The intense EL overshoot of nanosecond or shorter time duration may be useful in digital communication, and moreover, the EL overshoot gives important information about the processes involving injection, transport and recombination of charge carriers. The criteria for appearance of EL overshoot in bilayer OLEDs are explored. A good agreement is found between the theoretical and experimental results.     

Synthesis and mesomorphic characterization of azoesters with a coumarin ring

We have synthesized a homologous series of azoesters consisting of a coumaryl moiety as the end group. Eleven derivatives of this series exhibit mesomorphism. The nematic mesophase is exhibited from ethyl homologue onward, while the smectic phase commences at the pentyl derivative and is exhibited along with the nematic phase up to the hexadecyl derivative. The N-I transition temperatures curves show the usual odd-even effect. All the compounds in this series are thermally stable and exhibit a wide mesomorphic range of nearly 120°C. Their thermal stabilities and other characteristics are discussed.     

Synthesis of 2, 2-Dimethyl-2H-chromenes via a Palladium (II) Catalysed Reaction

The antijuvenile hormones Precocene-I, Precocene-II and other bioactive 2, 2-dimethyl-2H-chromenes have been synthesised by intramolecular oxidative cyclisation of 2-isoprenyl phenols catalysed by a palla-dium(II) salt.     

Nitrenium Salts in Lewis Acid Catalysis

Molecular compounds featuring nitrogen atoms are typically regarded as Lewis bases and are extensively employed as donor ligands in coordination chemistry or as nucleophiles in organic chemistry. By contrast, electrophilic nitrogen‐containing compounds are much rarer. Nitrenium cations are a new family of nitrogen‐based Lewis acids, the reactivity of which remains largely unexplored. In this work, nitrenium ions are explored as catalysts in five organic transformations. These reactions are the first examples of Lewis acid catalysis employing nitrogen as the site of substrate activation. Moreover, these compounds are readily accessed from commercially available reagents and exhibit remarkable stability toward moisture, allowing for benchtop transformations without the need to pretreat solvents.     

Framework Effects on Activation and Functionalisation of Methane in Zinc-Exchanged Zeolites

The first selective oxidation of methane to methanol is reported herein for zinc-exchanged MOR (Zn/MOR). Under identical conditions, Zn/FER and Zn/ZSM-5 both form zinc formate and methanol. Selective methane activation to form [Zn-CH₃]⁺ species was confirmed by ¹³C MAS NMR spectroscopy for all three frameworks. The percentage of active zinc sites, measured through quantitative NMR spectroscopy studies, varied with the zeolite framework and was found to be ZSM-5 (5.7 %), MOR (1.2 %) and FER (0.5 %). For Zn/MOR, two signals were observed in the ¹³C MAS NMR spectrum, resulting from two distinct [Zn-CH₃]⁺ species present in the 12 MR and 8 MR side pockets, as supported by additional NMR experiments. The observed products of oxidation of the [Zn-CH₃]⁺ species are shown to depend on the zeolite framework type and the oxidative conditions used. These results lay the foundation for developing structure–function correlations for methane conversion over zinc-exchanged zeolites.     

Band gap determination in lead iodide polytypes

The band gaps of the polytypic crystals of lead iodide have been determined by studying the temperature variation of conductivity. Results obtained on several polytypic crystals show that the band gaps of the higher polytypes are lower than that of the parent 2H structure (2.56 eV). As for example the band gaps for 12H, 14H, 18H and 20H (disordered) were found to be 1.65, 1.44, 1.07 and 1.01 eV. The significance of the band gap determination in regard to the recent anomalous results on the physical properties of lead iodide crystals, has been indicated.     

Trimers, molecules, and polarons in mass-imbalanced atomic Fermi gases

We consider the ground state of a single "spin-down" impurity atom interacting attractively with a "spin-up" atomic Fermi gas. By constructing variational wave functions for polarons, molecules, and trimers, we perform a detailed study of the transitions between these dressed bound states as a function of mass ratio r=m↑/m↓ and interaction strength. Crucially, we find that the presence of a Fermi sea enhances the stability of the p-wave trimer, which can be viewed as a Fulde-Ferrell-Larkin-Ovchinnikov molecule that has bound an additional majority atom. For sufficiently large r, we find that the transitions lie outside the region of phase separation of the imbalanced Fermi gas and should thus be observable in experiment, unlike the well-studied equal-mass case.     

Inverse colloidal crystal membranes for hydrophobic interaction membrane chromatography

A collaborative study on the robustness and portability of a capillary electrophoresis‐mass spectrometry method for peptide mapping was performed by an international team, consisting of 13 independent laboratories from academia and industry. All participants used the same batch of samples, reagents and coated capillaries to run their assays, whereas they utilized the capillary electrophoresis‐mass spectrometry equipment available in their laboratories. The equipment used varied in model, type and instrument manufacturer. Furthermore, different types of sheath‐flow capillary electrophoresis–mass spectrometry interfaces were used. Migration time, peak height and peak area of ten representative target peptides of trypsin‐digested bovine serum albumin were determined by every laboratory on two consecutive days. The data were critically evaluated to identify outliers and final values for means, repeatability (precision within a laboratory) and reproducibility (precision between laboratories) were established. For relative migration time the repeatability was between 0.05 and 0.18% RSD and the reproducibility between 0.14 and 1.3% RSD. For relative peak area repeatability and reproducibility values obtained were 3–12 and 9–29% RSD, respectively. These results demonstrate that capillary electrophoresis‐mass spectrometry is robust enough to allow a method transfer across multiple laboratories and should promote a more widespread use of peptide mapping and other capillary electrophoresis‐mass spectrometry applications in biopharmaceutical analysis and related fields.     

Recent Progress on Phospholipases: Different Sources,Assay Methods,Industrial Potential and Pathogenicity

Significant studies on phospholipases optimization, characterization, physiological role and industrial potential have been conducted worldwide. Some of them have been directed for biotechnological advances such as gene discovery and functional enhancement by protein engineering. Others reported phospholipases as virulence factor and major cause of pathophysiological effects. A general overview on phospholipase is needed for the identification of new reliable and efficient phospholipase, which would be potentially used in number of industrial and medical applications. Phospholipases catalyse the hydrolysis of one or more ester and phosphodiester bonds of glycerophospholipids. They vary in site of action on phospholipid which can be used industrially for modification/production of new phospholipids. Catalytically active phospholipase mainly use phosphatidylcholine as major substrate, but they can also show specificity with other phospholipids. Several accurate phospholipase assay methods are known, but a rapid and reliable method for high-throughput screening is still a challenge for efficient supply of superior phospholipases and their practical applications. Major application of phospholipase is in industries like oil refinery, health food manufacturing, dairy, cosmetics etc. All types of phospholipases can be involved as virulence factor. They can also be used as diagnostic markers for microbial infection. The importance of phospholipase in virulence is proven and inhibitors of the enzyme can be used as candidate for preventing the associated disease.