Comparison of stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry in application to supersonic jet spectrometry

Summary A supersonic jet spectrum of 9,10-dichloroanthracene is measured by stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry. The performance obtained is compared for these spectrometric methods, providing same information concerned with the energy level of the ground state. The former is more preferential for measurement of a high-resolution spectrum, since the spectral resolution is determined by the linewidth of the dumping laser. On the other hand, the latter is more preferential for measurement with better sensitivity at the expense of the spectral resolution, since the fluorescence throughput can be improved by increasing the slit width of the monochromator.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Aging of concrete buildings and determining the pH value on the surface of concrete by using a handy semi-conductive pH meter.

A new method was devised for measuring the pH of a concrete surface by pHBOY-P2 with a piece of filter paper by extracting the pH value from concrete. This is a simple and inexpensive method that does not damage the concrete building, and is easy to apply on concrete samples for monitoring. By using the method mentioned above, a drastic decrease of the pH value of concrete bridges and buildings has investigated. The method is environmentally friendly to detect the pH value change of concrete as an environmental sample investigation.     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Martin Boundaries of Elliptic Skew Products, Semismall Perturbations, and Fundamental Solutions of Parabolic Equations

We consider positive solutions of elliptic partial differential equations on non-compact domains of Riemannian manifolds. We explicitly determine Martin boundaries and Martin kernels for a class of elliptic equations in skew product form by exploiting and developing perturbation theory for elliptic equations and short/long-time estimates for fundamental solutions of parabolic equations.     

Short-step synthesis of tamoxifen and its derivatives via the three-component coupling reaction and migration of the double bond

The anti-tumor agent, tamoxifen, is easily synthesized by the successive allylation of benzaldehyde and the Friedel-Crafts alkylation reaction of anisole with the intermediary homoallyl silyl ethers, followed by the migration of the double bond to form the desired tetra-substituted ethylenes. Several derivatives of tamoxifen are also produced according to a similar synthetic strategy.     

Integral representations of nonnegative solutions for parabolic equations and elliptic Martin boundaries

We consider nonnegative solutions of a parabolic equation in a cylinder D×(0,T), where D is a noncompact domain of a Riemannian manifold. Under the assumption [IU] (i.e., the associated heat kernel is intrinsically ultracontractive), we establish an integral representation theorem: any nonnegative solution is represented uniquely by an integral on (D×{0})∪(M_∂D×[0,T)), where M_∂D is the Martin boundary of D for the associated elliptic operator. We apply it in a unified way to several concrete examples to explicitly represent nonnegative solutions. We also show that [IU] implies the condition [SP] (i.e., the constant function 1 is a small perturbation of the elliptic operator on D).     

Optical humidity and ammonia gas sensors using Reichardt's dye-polymer composites

Optical intensity reflected at 750 nm by Reichardt's betain dye-polymer (PMMA or PEO) composite increased with an increase in humidity and was not affected by ammonia vapor. For the composites treated with hydrochloric acid, the intensity at around 590 nm decreased with an increase in ammonia concentration, and the sensitivity was enhanced by the presence of water vapor. The treatment with hydrochloric acid induced the formation of phenolic group, O⁻---H⁺ and N⁺---Cl⁻ in the dye. The sorption of NH₃ decreases the ionic interactions.     

Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).