Improved straightforward chemical synthesis of dihydroxyacetone phosphate through enzymatic desymmetrization of 2,2-dimethoxypropane-1,3-diol

Dihydroxyacetone phosphate (DHAP) was synthesized in high purity and yield in four steps starting from dihydroxyacetone dimer (DHA) (47% overall yield). DHA was converted into 2,2-dimethoxypropane-1,3-diol, which was desymmetrized by acetylation with lipase AK. The alcohol function was phosphorylated to give dibenzyl phosphate ester 4. From 4, two routes were investigated for large-scale synthesis of DHAP. First, acetate hydrolysis was performed prior to hydrogenolysis of the phosphate protective groups. The acetal hydrolysis was finally catalyzed by the phosphate group itself. Second, acetate and acetal hydrolysis were performed in one single step after hydrogenolysis.     

Proton uptake of rhodobacter capsulatus reaction center mutants modified in the primary quinone environment

Flash-induced absorbance spectroscopy was used to analyze the proton uptake and electron transfer properties of photosynthetic reaction centers (RC) of Rhodobacter capsulatus that have been genetically modified near the primary quinone electron acceptor (Q(A)). M246Ala and M247Ala, which are symmetry-related to the positions of two acidic groups, L212Glu and L213Asp, in the secondary quinone electron acceptor (QB) protein environment, have been mutated to Glu and Asp, respectively. The pH dependence of the stoichiometry of proton uptake upon formation of the P+Q(A)- (H+/P+Q(A)-) and PQ(A) (H+/Q(A)-) (P is the primary electron donor, a noncovalently linked bacteriochlorophyll dimer) states have been measured in the M246Ala --> Glu and the M247Ala --> Asp mutant RC, in the M246Ala-M247Ala --> Glu-Asp double mutant and in the wild type (WT). Our results show that the introduction of an acidic group (Glu or Asp) in the QA protein region induces notable additional proton uptake over a large pH region (approximately 6-9), which reflects a delocalized response of the protein to the formation of Q(A)-. This may indicate the existence of a widely spread proton reservoir in the cytoplasmic region of the protein. Interestingly, the pH titration curves of the proton release caused by the formation of P+ (H+/P+: difference between H+/P+Q(A)- and H+/PQ(A)- curves) are nearly superimposable in the WT and the M246Ala --> Glu mutant RC, but substantial additional proton release is detected between pH 7 and 9 in the M247Ala --> Asp mutant RC. This effect can be accounted for by an increased proton release by the P+ environment in the M247Ala --> Asp mutant. The M247Ala --> Asp mutation reveals the existence of an energetic and conformational coupling between donor and acceptor sides of the RC at a distance of nearly 30A.     

Modeling of submicrometer aerosol penetration through sintered granular membrane filters

We present a deep-bed aerosol filtration model that can be used to estimate the efficiency of sintered granular membrane filters in the region of the most penetrating particle size. In this region the capture of submicrometer aerosols, much smaller than the filter pore size, takes place mainly via Brownian diffusion and direct interception acting in synergy. By modeling the disordered sintered grain packing of such filters as a simple cubic lattice, and mapping the corresponding 3D connected pore volume onto a discrete cylindrical pore network, the efficiency of a granular filter can be estimated, using new analytical results for the efficiency of cylindrical pores. This model for aerosol penetration in sintered granular filters includes flow slip and the kinetics of particle capture by the pore surface. With a unique choice for two parameters, namely the structural tortuosity and effective kinetic coefficient of particle adsorption, this semiempirical model can account for the experimental efficiency of a new class of "high-efficiency particulate air" ceramic membrane filters as a function of particle size over a wide range of filter thickness and texture (pore size and porosity) and operating conditions (face velocity).     

UVB irradiation of normal human skin favors the development of type-2 T-cells in vivo and in primary dermal cell cultures

To determine the effect of UVB exposure on the balance of type-1 or type-2 T-cells in skin, we examined the expression of key markers interferon (IFN)-gamma and interleukin (IL)-4 in cryostat sections. IFN-gamma mRNA was clearly detectable in nonirradiated control skin, and IFN-gamma protein was found in 2% of the dermal CD3pos T-cells, whereas IL-4 mRNA was hardly detectable, and no IL-4 protein was found. In contrast, IL-4 mRNA expression increased upon irradiation, and IL-4 was found in 2% of the T-cells at day 2 after UVB-exposure. Concomitantly, IFN-gamma mRNA expression decreased, and IFN-gamma protein became absent. We also analyzed T-cells present in primary dermal cell cultures, which were used as an in vitro equivalent of the in vivo situation. As compared with T-cells from control skin, T-cells in dermal cell cultures from UVB-exposed skin displayed an increased IL-4 and decreased IFN-gamma expression. No such skewing occurred when the T-cells from irradiated skin were cloned in the absence of a dermal microenvironment. Except for an occasional positive T-cell, type-1-associated cell-surface markers (CCR5, CXCR3) or type-2 markers (CCR3, CD30, CRTH2) were undetectable in situ. But these markers were expressed on cultured dermal T-cells from UVB-exposed and control skin at a comparable level, but did not correlate with the IFN-gamma and IL-4 production. Altogether, UVB-induced changes of the dermal microenvironment favor the development of type-2 T-cells.     

Impact of dissolution on the uncertainty of spent fuel analysis

One of the objectives of the French Alternative Energies and Atomic Energy Commission in the Marcoule Centre is to accurately quantify the composition of nuclear spent fuel, i.e. to determine the concentration of each isotope with suitable measurement uncertainty. These analysis results are essential for the validation of calculation codes used for the simulation of fuel behaviour in nuclear reactors and for nuclear matter accountancy. The different experimental steps are first the reception of a piece of spent fuel rod at the laboratory of dissolution studies, and then dissolution in a hot cell of a sample of the spent fuel rod received. Several steps are necessary to obtain a complete dissolution. Taking into account these process steps, and not only those of analysis for the evaluation of measurement uncertainties, is new, and is described in this paper. The uncertainty estimation incorporating the process has been developed following the approach proposed by the Guide to the Expression of Uncertainty in Measurement (GUM). The mathematical model of measurement was established by examining the dissolution process step by step. The law of propagation of uncertainty was applied to this model. A point by point examination of each step of the process permitted the identification of all sources of uncertainties considered in this propagation for each input variable. The measurement process presented involves the process and the analysis. The contents of this document show the importance of taking the process into account in order to give a more reliable uncertainty assessment to the result of a concentration or isotope ratio of two isotopes in spent fuel.     

Strategies of karyotype differentiation in Elateridae (Coleoptera, Polyphaga)

The chromosome study of five species of the family Elateridae, belonging to the subfamilies Agrypninae and Elaterinae, and the analysis of the cytogenetic data previously recorded for this family permitted the establishment of the main strategies of karyotypic differentiation that has occurred in the elaterids. In Agrypninae, the three species studied (Conoderus fuscofasciatus, Conoderus rufidens, and Conoderus sp.) showed the male karyotype 2n=16+X0. This karyotypic uniformity detected in these Conoderus species has also been shared with other species of the same genus, differing considerably from chromosomal heterogeneity verified in the subfamily Agrypninae. The use of the C-banding technique in C. fuscofasciatus and Conoderus sp. revealed constitutive heterochromatin in the pericentromeric region of the majority of the chromosomes. In C. fuscofasciatus, additional constitutive heterochromatin were also observed in the long arm terminal region of almost all chromosomes. Among the representatives of Elaterinae, the karyotype 2n=18+Xy(p) of Pomachilius sp.2 was similar to that verified in the majority of the Coleoptera species, contrasting with the chromosomal formula 2n=18+X0 detected in Cardiorhinus rufilateris, which is most common in the species of Elaterinae. In the majority of the elaterids, the chromosomal differentiation has frequently been driven by reduction of the diploid number; but, among the four cytogenetically examined subfamilies, there are some differences in relation to the trends of karyotypic evolution.     

Enzymatic resolution of a 1,2-cyclic sulphite glycerol derivative

cis-2-Oxo-5-hydroxymethyl-1,3,2-dioxathiolane 2a can be efficiently resolved by a lipase from Pseudomonas cepacia-catalysed acylation reaction with vinylbutyrate. Compound 2a was directly prepared from glycerol in one step. This first lipase-catalysed resolution of a cyclic sulphite derivative provides a potentially useful activated chiral synthon.     

Development and validation of a rapid LC-ESI-MS/MS method for quantification of fluoxetine and its application to MS binding assays

In the present study, a rapid and sensitive LC-ESI-MS/MS method for quantification of (S)-fluoxetine as a native marker in mass spectrometry (MS) binding assays addressing the human serotonin transporter (hSERT) was developed and validated. The concept of MS binding assays based on mass spectrometric quantification of a nonlabeled marker recently introduced by us represents a promising alternative to conventional radioligand binding without the drawbacks inherently connected with radioisotope labeling. For high-performance liquid chromatography (HPLC), a 20 × 2-mm RP-18 column with a mobile phase composed of acetonitrile and ammonium bicarbonate buffer (5 mmol L⁻¹, pH 9.5) at a ratio of 80:20 (v/v) and a flow rate of 800 μL min⁻¹ in an isocratic mode were used, resulting in a chromatographic cycle time of 60 s. Employing [²H₅]fluoxetine as internal standard enabled ESI-MS/MS quantification of (S)-fluoxetine between 3 nmol L⁻¹ and 50 pmol L⁻¹ (LLOQ) in matrix obtained from binding experiments without the need of any sample preparation. Validation of the method showed that linearity, intra-, and inter-batch accuracy as well as precision meet the requirements of the FDA guidance for bioanalytical method validation. Considering sensitivity and speed, the established method is clearly superior to those published for biological matrices so far. Furthermore, the method was transferred to other RP-18 columns of different lengths and respective validation experiments demonstrated its versatility and chromatographic robustness. Finally, the newly developed method was successfully applied to MS binding assays for hSERT. The affinity determined for (S)-fluoxetine in saturation experiments was in good agreement with literature data obtained in respective radioligand binding assays.     

Maritime inventory routing with multiple products: A case study from the cement industry

This paper considers a maritime inventory routing problem faced by a major cement producer. A heterogeneous fleet of bulk ships transport multiple non-mixable cement products from producing factories to regional silo stations along the coast of Norway. Inventory constraints are present both at the factories and the silos, and there are upper and lower limits for all inventories. The ship fleet capacity is limited, and in peak periods the demand for cement products at the silos exceeds the fleet capacity. In addition, constraints regarding the capacity of the ships’ cargo holds, the depth of the ports and the fact that different cement products cannot be mixed must be taken into consideration. A construction heuristic embedded in a genetic algorithmic framework is developed. The approach adopted is used to solve real instances of the problem within reasonable solution time and with good quality solutions.