Evaluation of fine structure of tubular zeolite NaA membrane by FTIR-ATR and FIB-TEM.

A zeolite NaA (LTA) membrane supported by an alumina porous support tube for pervaporation (PV) dehydration of ethanol was characterized by transmission electron microscopy (TEM) using a focused ion beam (FIB) thin-layer specimen preparation technique and by Fourier transform infrared attenuated total reflectance method (FTIR-ATR) using a diamond prism as the waveguide. FIB-TEM clearly presented cross-section images up to about 15 microm depth from the membrane surface. FTIR-ATR monitored the Si-O asymmetric stretching vibration spectrum. The Si-O spectrum was compared with the TEM image and their relationships were discussed. By combining the two methods, we could study the thickness of surface LTA crystals, the grain boundary, the LTA/alumina interface structure and the crystallinity and density of materials inside of the alumina porous support. Consequently, fine structure changes of the LTA membrane corresponding to the hydrothermal synthesis condition could be sensitively detected.     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

Purines. LII. Synthesis and biological evaluation of 8-methylguanine 7-oxide and its 9-arylmethyl derivatives.

The synthesis of 8-methylguanine 7-oxide (3) was accomplished via a "phenacylamine route", which started from condensation of alpha-(4-methoxybenzylamino)propiophenone (6), prepared by coupling of alpha-bromopropiophenone (4) and 4-methoxybenzylamine (5), with 2-amino-6-chloro-5-nitro-4(3H)-pyrimidinone (7) and proceeded through cyclization of the resulting phenacylaminopyrimidinone (8) and removal of the 4-methoxybenzyl group. The N-oxide 3 and its 9-arylmethyl derivatives 9 and 11 showed only very weak antileukemic activity and no antimicrobial activity.     

Solvatochromic studies of interactions between surfactants and poly(N-substituted acrylamide)s

Interactions between poly(N-substituted acrylamide)s and surfactants, such as sodium dodecyl sulfate (SDoS) and sodium decyl sulfate (SDeS), in aqueous solutions were investigated using a solvatochromic probe. The polymers used were poly(N,N-dimethylacrylamide) (PDMA), poly(N-isopropylacrylamide) (PIPA), poly(N-acryloylpyrrolidine) (PAPR), and poly(vinylpyrrolidone) (PVPy) for comparison. They were labeled with pyridinium dicyanomethylide chromophore as a solvatochromic probe, and the changes in the microenvironment polarity of the polymer upon association with surfactant micelles were investigated by monitoring the λ_max in the absorption spectra of the probe molecule. It was found that the Gibbs free energy of micelle stabilization by polymer complexation for SDoS is 7.6, 4.1, and 2.2 kJ mol⁻¹, and for SDeS 5.1, 2.9, and 0.8 kJ mol⁻¹ with PIPA, PAPR, and PDMA, respectively. These results indicate that the complexation between polymer and surfactant is influenced not only by the alkyl-chain length of the surfactant, but also by the polymer side groups.     

Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.     

Heteroatom-guided torquoselective olefination of alpha-oxy and alpha-amino ketones via ynolates

Ynolates were found to react with alpha-alkoxy-, alpha-siloxy-, and alpha-aryloxyketones at room temperature to afford tetrasubstituted olefins with high Z selectivity. Since the geometrical selectivity was determined in the ring opening of the beta-lactone enolate intermediates, the torquoselectivity was controlled by the ethereal oxygen atoms. From experimental and theoretical studies, the high Z selectivity is induced by orbital and steric interactions rather than by chelation. In a similar manner, alpha-dialkylamino ketones provided olefins with excellent Z selectivity. These products can be easily converted into multisubstituted butenolides and gamma-butyrolactams in good yield.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Electron-transfer reactions and functionalization of cytochrome P450cam monooxygenase system in reverse micelles

Enzyme-based electron-transfer reactions involved in the cytochrome P450 monooxygenase system were investigated in nanostructural reverse micelles. A bacterial flavoprotein, putidaredoxin reductase (PdR), was activated and shown to be capable of catalyzing the electron transport from NADH to electron-carrier proteins such as cytochrome b5 (tCyt-b5) and putidaredoxin (Pdx) in reverse micelles. Ferric tCyt-b5 in reverse micelles was effectively converted to its ferrous form by the exogenous addition of separately prepared reverse micellar solution harboring PdR and NADH. The fact that direct interactions of macromolecular proteins should be possible in the reverse micellar system encouraged us to functionalize a multicomponent monooxygenase system composed of the bacterial cytochrome P450cam (P450cam), putidaredoxin (Pdx), and PdR in reverse micelles. The successful camphor hydroxylation reaction catalyzed by P450cam was significantly dependent on the coexistence of Pdx, PdR, and NADH but not H2O2, suggesting that the oxygen-transfer reactions proceeded via a "monooxygenation" mechanism. This is the first report of a multicomponent cytochrome P450 system exhibiting enzymatic activity in organic media.     

An application of activation analysis of aluminum in biological materials

The behavior of aluminum compounds in animals was made clear by using non-destructive neutron activation analysis instead of radiotracer method. Basic aluminum sucrose sulfate (BASS) and dried aluminum hydroxide gel (DAHG) were orally administered to rats. The residual BASS and DAHG on gastric walls of rats were determined by neutron activation analysis. It was obtained the following results that BASS was found at the longer time in the stomach. For reason, it is seemed that BASS is hydrolyzed in gastric juice. And it could not find the aluminum in liver, kidney and spleen.