Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

A posteriori H1 error estimation for a singularly perturbed reaction diffusion problem on anisotropic meshes

The paper deals with a singularly perturbed reaction diffusionmodel problem. The focus is on reliable a posteriori error estimatorsfor the H¹ seminorm that can be applied to anisotropic finiteelement meshes. A residual error estimator and a local problemerror estimator are proposed and rigorously analysed. They arelocally equivalent, and both bound the error reliably. Threemodifications of these estimators are introduced and discussed. Much attention is given to the performance of the error estimatorin numerical experiments. This helps to identify those estimatorsthat are suitable for practical applications.     

Metallo‐supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy

In aqueous solutions, amphiphilic block copolymers in which a polystyrene (PS) segment is connected to a poly(ethylene oxide) (PEO) block via a bis(2,2′:6′,2″‐ terpyridine ruthenium) complex can form micelles. Such micelles of the protomer type PS₂₀‐[Ru]‐PEO₇₀, according to the preparation procedure representing frozen micelles, were studied by sedimentation velocity and sedimentation equilibrium analysis in an analytical ultracentrifuge and by transmission electron microscopy, with different techniques applied for the sample preparation. The particles obtained were surprisingly multifarious in size. In ultracentrifugation experiments performed at relatively low salt concentrations, the distributions of the sedimentation coefficient s_20,w showed a pronounced peak at 9.6 S and a broad, only partly separated second peak around 14 S. The molar mass of the particles at the peak was around 430,000 g/mol, corresponding to an aggregation number of approximately 85. The average hydrodynamic diameter of the particles in the peak fraction was approximately 13 nm. In electron micrographs of negatively stained samples, spheres of diameters between 10 and 25 nm were the most abundant particles, but larger ones with a wide size range were also visible. The latter particles apparently were composed of smaller ones. The data from both sedimentation analysis and electron microscopy showed that (1) the studied compound formed primary micelles of diameters around 20 nm and (2) the primary micelles had a tendency toward aggregation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3159–3168, 2003     

Oxygen on Fe(100) and Fe(110)

Investigations of the electronic and magnetic properties of oxygen adsorbed on magnetized iron films have been carried out by means of angle and spin resolving photoelectron spectroscopy. Iron, epitaxially grown on W(100) and W(110) crystals, served as the ferromagnetic substrate. Exchange splittings of the O 2p_x derived level have been detected, demonstrating a magnetic coupling between the chemisorbate and the iron layer. Variations of the exchange splitting have occurred as a function of the oxygen coverage, photon energy, and emission angle. High oxygen exposures have lead to a FeO overlayer at the surface.     

Hg2(OH)[BF4], the First Basic Mercurous Tetrafluoroborate

The first basic mercurous tetrafluoroborate, Hg₂(OH)[BF₄], was obtained through a synproportionation reaction of red mercuric oxide, HgO, and elemental mercury in a 35% solution of HBF₄ in water as colourless single crystals. The crystal structure (orthorhombic, Pbca, Z = 8, a = 985.0(1), b = 991.0(1), c = 1141.0(2) pm) contains [(HO)_1/2—Hg—Hg—(OH)_1/2]⁺ zig‐zag chains that are further connected via weak Hg—OH interchain interactions to layers between which the [BF₄]^— are located in an up and down fashion.     

Hydrogenation without a transition-metal catalyst: on the mechanism of the base-catalyzed hydrogenation of ketones

The hydrogenation of unsaturated organic substrates such as olefins and ketones is usually effected by homogeneous or heterogeneous transition-metal catalysts. On the other hand, a single case of a transition-metal-free and purely base-catalyzed hydrogenation of ketones was reported by Walling and Bollyky some 40 years ago. Unfortunately, the harsh reaction conditions (ca. 200 degrees C, >100 bar H(2), potassium tert-butoxide as base) limit the substrate spectrum of this reaction to robust, nonenolizable ketones such as benzophenone. We herein present a mechanistic study of this process as a basis for future rational improvement. The base-catalyzed hydrogenation of ketones was found to be irreversible, and it shows first-order kinetics with respect to the substrate ketone, hydrogen, and catalytic base. The rate of the reaction depends on the type of alkali ion present (Cs > Rb - K > Na > Li). Using D(2) instead of H(2) revealed a rapid base-catalyzed isotope exchange/equilibration between the gas phase and the solvent as a concomitant reaction. The degree of deuteration of the product alcohols did not indicate a significant kinetic isotope effect. It is proposed that both ketone reduction and isotope exchange proceed via similar six-membered cyclic transition states involving the H(2)(D(2))-molecule, the alkoxide base, and the ketone (solvent alcohol in the case of isotope exchange). Mechanistic analogies are pointed out which apparently exist between the base-catalyzed hydrogenation of ketones studied here and the Ru-catalyzed asymmetric ketone hydrogenation developed by Noyori. In both cases, heterolysis of the hydrogen molecule appears to be assisted by a Br?nsted-base (i.e., alkoxide), the latter being bound to the substrate ketone or the catalyst ligand, respectively, by a bridging Lewis-acidic alkali ion.     

Pr?parative Gaschromatographie

Zusammenfassung Es werden zwei neue, sehr selektive Trennflüssigkeiten, Äthylenglykol-bis(propionitril)-äther und Glycerin-tri(propionitril)-äther, angegeben. Die Trennflüssigkeiten sind so selektiv wie ,-Bis(propionitril)-äther, erlauben aber höhere Arbeitstemperaturen von 140° bzw. 170°C. An Säulen kleinen Querschnittes wird die präparative Trennung größerer Mengen unter Ausnutzung der Selektivität dieser Trennflüssigkeiten aufgezeigt.Die Trennwirksamkeit und die Belastbarkeit von Säulen verschiedenen Durchmessers zwischen 1–10 cm wird angegeben. Die Trennwirksamkeit liegt in der gleichen Größenordnung wie die der analytischen Säulen. Die Belastbarkeit steigt proportional dem Querschnitt an.I. Mitteilung: E. Bayer u. H. G. Witsch, diese Z. 170, 278 (1959).     

Combined electron diffraction,conformational energy and vibrational investigations of cis-1,4-ditertiary butyl-cyclohexane

The structure of cis-1,4-ditertiarybutylcyclohexane(DTBC) was investigated by combined electron diffraction, conformational and vibrational analyses in order to obtain results which are more conclusive than those previously obtained by electron diffraction alone. In this study, first the minimum energy conformations for DTBC were calculated by the Westheimer-Hendrickson procedure using various force fields described in the literature; the same fields and the minimum energy conformations were used in subsequent vibrational analyses to calculate the mean amplitudes of vibration for each minimum energy conformation of DTBC; these mean amplitudes and the corresponding internuclear distances were then used to calculate the theoretical electron diffraction radial distribution curves which were compared to the experimental curves. The results indicate that the conformational energies of all the minimum energy chair and non-chair forms of DTBC are very similar. In excellent agreement with this, the theoretical radial distribution curves of all minimum energy forms have to be mixed for a best fit to the experimental radial distribution curve. A least squares analysis of the mixture under the described conditions yields for 110 °C a composition of approximately one third chair and two thirds non-chair forms. The quality of the empirical conformational force fields has a definite influence on the reliability of these results.     

Mimicking primary processes in photosynthesis—covalently linked porphyrin quinones

Porphyrin quinones (P-Qs), covalently linked via different aliphatic bridges, have been synthesized and studies in their (porphyrin) cationic and (semiquinone) anionic radical states by EPR, ENDOR and TRIPLE resonance techniques. Electron transfer (ET) from the porphyrin donor to the quinone acceptor could be observed by time-resolved picosecond fluorescence spectroscopy (singlet ET) and by time-resolved EPR spectroscopy (triplet ET) in isotropic fluid solution and in anisotropic media (liquid crystals and reversed micelles). Steady-state in situ photoexcitation of P-Qs in CTAB cationic reversed micelles yielded the corresponding semiquinone radical anions. In TRITON X-100 reversed micelles both the radical cation of the porphyrin and the radical anion of the semiquinone could be detected, which occured in complete emission. In covalently linked porphyrin flavins ET from the photoexcited porphyrin fragment to the flavin and, in addition, energy transfer from the photoexcited flavin to the porphyrin could be observed.