高强混凝土弯压极限应变试验研究与计算

由于混凝土材料理化特性的差异,高强混凝土的弯压极限应变明显地小于普通混凝土,依据试验结果分析了高强混凝土的弯压极限应变变化规律,并给出了它的计算公式.     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

碳自掺杂石墨相氮化碳纳米片的制备及其在可见光照射下的光解水产氢性能

石墨相氮化碳(g-C3N4)由于具有对可见光吸收范围较窄和光生载流子分离效率低等缺陷,其光解水产氢活性较差.我们采用简单的一步热共聚法,以尿素和2,4,6-三氨基嘧啶(TAPD)混合物为前驱物,制备碳自掺杂纳米片(CNNS-x,xmg代表掺入TAPD的质量).X射线衍射(XRD)、元素分析(EA)和X射线光电子能谱(X...     

侧链结构对磺化聚芳醚性能及微观形貌的影响

比较了3种主链结构相同而侧链结构不同的磺化聚芳醚(SPAE)材料的性能. 分析了侧链结构对聚合物的吸水、 溶胀及质子传导行为的影响. 结果表明, 在相同的离子交换容量(IEC)条件下, 具有柔顺脂肪族侧链的聚芳醚材料具有较高的质子传导率. 其原因是由于柔顺的脂肪族侧链比刚性的芳香族侧链更易运动, 有利于侧链末端磺酸基团的聚集, 进而形成离子簇. 3种聚合物微观形貌的分析结果表明, 含柔顺侧链结构的聚合物薄膜具有更大的质子传输通道, 其结果与聚合物的宏观吸水和传导现象相吻合.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

定向进化提高枯草芽孢杆菌脂肪酶的活力

通过定向进化的方法, 提高了一个新的源于枯草芽孢杆菌 (Bacillus subtilis) 的脂肪酶 (BSL2) 的活力. 经过两轮易错 PCR 以及高通量筛选, 最终获得了比活力为野生出发酶 4.5 倍的突变体 3-1B2. 基因比对结果表明, 共有两个氨基酸发生了突变. 突变酶的酶学性质研究发现, 与野生酶相比, 它的热稳定性及 pH 稳定性略有增加, 最适温度和最适 pH 值则无太大的变化. 同源模建了 BSL2 与 3-1B2 的结构, 并与底物进行了分子对接. 结果表明, 突变体 3-1B2 的结合能比野生型 BSL2 低 1.29 kcal/mol, 活性中心 Ser77 残基与底物羰基的距离也由 0.319 nm 减小为 0.278 nm, 因而加快了酶反应速度, 提高了酶活力.     

丁胺包裹的CdSe量子点敏化的TiO2纳米晶薄膜电子转移机制

利用超快光谱技术系统研究了在丁胺包裹的CdSe量子点敏化的TiO₂纳米晶薄膜起始时刻界面间电子转移动力学。与之前的报道不同,该实验结果表明:CdSe量子点经过表面修饰后,两相电子注入机制--热电子和冷电子注入得以被证实,即:电子能分别从CdSe量子点导带中高的振动能级和导带底转移到TiO₂的导带。该机制详细描绘了电子在纳米界面间转移的图景。进一步研究发现:热电子注入的电子耦合强度(3.6±0.1 meV)比弛豫后的基态电子注入高两个数量级,基于Marcus理论,伴随着0.083 eV的重组能,冷电子注入的耦合强度值为~50 μeV。     

蓖麻油聚氧乙烯醚水基润滑液摩擦学特性研究

本文以蓖麻油聚氧乙烯醚水基润滑液为研究对象,分别使用润滑膜厚度测量仪、微摩擦试验机和四球摩擦试验机对其成膜特性、摩擦磨损特性和抗磨极压特性进行了系统的研究,并用扫描电子显微镜和能量色散光谱仪对摩擦磨损机制进行了分析。结果表明：蓖麻油聚氧乙烯醚提高了纯水的成膜能力,能够在钢-铝摩擦副形成有效的润滑膜,起到良好的减摩抗磨效果。随着浓度的增大,对钢-铝摩擦副的减摩抗磨性能和四球摩擦试验的抗磨极压性能都得到了提高。     

Improving the precision of fluorescence lifetime measurement using a streak camera

Streak camera has high temporal resolution and high sensitivity, and is a powerful tool in biomedical study to measure fluorescence lifetime and perform fluorescence lifetime imaging. However, nonuniformity of the gain in the streak tube and nonlinearity of the sweeping speed limit the precision of fluorescence lifetime measurement, particularly when fluorescence lifetimes are short. We have constructed a two-photon excitation fluorescence lifetime measurement system that is based on a synchroscan streak camera and have developed accordingly a method to correct the effect of gain nonuniformity and nonlinearity of sweeping speed on the measurement precision. A continuous-wave laser of high stability is used to calibrate the gain of the streak camera, and a Fabry-Perot etalon is used to calibrate the nonlinearity of the sweeping speed. Fitting algorithms are used to correct the gain of the streak camera and nonlinearity of the sweeping speed respectively, which significantly improves the measurement precision of the system, as characterized through the fluorescence lifetime of the short-lived fluorescence dye, Rose Bengal. Experimental results show that the measurement fluctuation of the lifetime has been improved from more than 10% to 2% after correcting the effects of gain nonuniformity and sweeping speed nonlinearity.     

Giant Magneto-Impedance of Co50Ni22Ga28 Alloy with High Chemical Ordering

The microstructure of CosoNi22Ga28 ribbon with the L10 structure is examined. The band-like morphology is observed. These bands with the width in a range of 40-200 nm appear along the transverse direction of the ribbon. The giant magnetoimpedance （GMI） effect in this alloy is measured. The results show that Co5oNi22Ga28 exhibits a sharp peak of the GAI effect. The maximum GAH ratio up to 360% is detected. The GMI effect measured versus temperature shows large jumps of the magnetoimpedance amplitude at the reversal martensitic transformation temperature 240℃ and Curie temperature 375℃C respectively. The jump ratios of the magnetoimpedance amplitude examined at these temperatures are about 5 and 10, respectively.