排序方式: 共有112条查询结果,搜索用时 15 毫秒
1.
利用柱切换液相色谱,建立了参附注射液中苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱和乌头碱6种乌头碱类生物碱,以及Rg1、Re、Rf、Rb1、Rc、Ro、Rb2、Rb3、Rd 9种人参皂苷的分析方法。首先利用强阳离子交换的在线固相小柱选择性富集和净化样品中生物碱类成分,优化了色谱条件;并采用EC-C18柱作为人参皂苷的分析柱,通过优化实验条件,结合柱切换方式,去除了样品中辅料等大极性基质成分对色谱柱的污染,实现了生物碱分析和人参皂苷分析的自动切换。结果显示,样品中的生物碱和人参皂苷分离良好,线性相关系数(r2)均大于0.999,连续进样精密度的相对标准偏差(RSD) < 2.0%,重复性的RSD < 2.0%;其中6种生物碱的平均回收率为95.1%~98.6%,检出限为4.0~8.2 ng/mL;9种人参皂苷的平均回收率为91.7%~104%。所构建的基于柱切换液相色谱技术的在线固相萃取方法能够有效去除样品中的基质干扰,快速完成参附注射液中3种单酯型生物碱和9种人参皂苷的快速定量,同时也可对3种双酯型生物碱进行限量检测,可应用于药物的质量评价。 相似文献
2.
建立了毛细管电泳快速检测牙龈卟啉单胞菌(P.g)、齿垢密螺旋体(T.d)、福赛斯坦纳菌(T.f)3种牙周病病原菌种的方法。紫外分光光度法表明,采用无菌吸潮纸尖及PBS缓冲液可以实现牙周病原菌的快速有效提取。对提取的牙周病病原菌种做多聚酶链式反应(PCR)与多重PCR反应,最后以20 cm长,75μm内径的石英毛细管作为分离通道,分离电压4000 V,1.2%羟乙基纤维素(HEC,250 K)为筛分介质,牙周病病原菌菌种P.g,T.d,T.f PCR及多重PCR产物12 min内得到较好分离。结果表明,毛细管电泳与PCR技术相结合,可以实现牙周病原菌种快速鉴定,且检测限低至4.80×10-11ng/μL。方法已用于牙周病原菌菌种的快速检测。 相似文献
3.
通过对前处理方法的比较,选择了快速溶剂萃取作为可吸入颗粒物中多环芳烃的提取方式,并且将ASE的萃取条件作了优化实验,确定ASE的优化结果为DCM:HEX=2:1,萃取温度为120℃,萃取压力为10.34 MPa。处理完的样品上气相色谱质谱-质谱测定,得到空白样品中24种PAHs均有检出,实际样品中的含量均低于10 ng/m L,6种替代物的标准曲线的相关系数在0.999以上,24种PAHs标准样品作了3个不同浓度范围的标准曲线,相关系数均在0.99以上。空白加标实验中得到6种替代物的回收率在58.7%~108.2%之间,24种PAHs的平均回收率在88.3%~104.0%之间,相对标准偏差均低于9.0%。样品加标实验中6种替代物的加标回收率在60.0%~106.5%之间,24种PAHs的回收率在78.0%~95.0%之间,相对标准偏差均低于6.0%。 相似文献
4.
5.
In this paper, a new type of resonant Brewster filters (RBF) with surface relief structure for the multiple channels is first presented by using the rigorous coupled-wave analysis and the S-matrix method. By tuning the depth of homogeneous layer which is under the surface relief structure, the multiple channels phenomenon is obtained. Long range, extremely low sidebands and multiple channels are found when the RBF with surface relief structure is illuminated with Transverse Magnetic incident polarization light near the Brewster angle calculated with the effective media theory of sub wavelength grating. Moreover, the wavelengths of RBF with surface relief structure can be easily shifted by changing the depth of homogeneous layer while its optical properties such as low sideband reflection and narrow band are not spoiled when the depth is changed. Furthermore, the variation of the grating thickness does not effectively change the resonant wavelength of RBF, but have a remarkable effect on its line width, which is very useful for designing such filters with different line widths at desired wavelength. 相似文献
6.
7.
云母1/4波片偏振干涉谱的研究 总被引:15,自引:1,他引:14
本文利用岛津UV301-PC分光光计,测定了云母1/4波片的偏振干波谱,该光谱和以往文献中的显著不同。本文对此进行了分析和解释,并由此得出了在考虑吸收的情况下的爱里方程表达形式。该将有助于测定某些晶体的吸光度。 相似文献
8.
The rare isotope ^236U has a half-life of 2.342(3)×107 years, and is produced principally by thermal neutron capture on ^235U. The isotopic atom ratio of ^236U/^238U depends on the integral thermal neutron flux received by the material of interest. ^236U is potentially useful as a "fingerprint" for indicating the presence of neutron-irradiated uranium usually originating from nuclear activity. By extracting negative molecular ion UO^- from the uranium oxide target, simulating the ^236U^16O^- beam transport with ^238U^16O^- and ^208Pb2^16O^- pilot molecular ion beam, transporting the ^236U-containing ion beam with a high resolution injection magnet analyzer and electrostatic analyzer system, and finally identifying and detecting ^236U with a time-of-flight detector (TOF), a method for AMS (Accelerator Mass Spectrometry) measurement of ^236U was established on the HI-13 Accelerator AMS system at China Institute of Atomic Energy. 相似文献
9.
The rare isotope 236U has a half-life of 2.342(3)×107 years,and is produced principally by thermal neutron capture on 235U.The isotopic atom ratio of 236U/238U depends on the integral thermal neutron flux received by the material of interest.236U is potentially useful as a fingerprint for indicating the presence of neutron-irradiated uranium usually originating from nuclear activity.By extracting negative molecular ion UO- from the uranium oxide target,simulating the 236U16O- beam transport with 238U16O- an... 相似文献
10.
固体润滑可有效降低摩擦系数和磨损率,大大延长基材使用寿命,已成为工业领域应用于低速、重载和高低温等工况下机械运动件摩擦副的关键技术之一。高分子固体润滑替代或者配合流体润滑,利用高分子粉末、薄膜或复合材料避免金属间的直接接触,形成低摩擦润滑介质实现减摩耐磨。本文概述了粘结固体润滑涂层(BSLCs)、固体润滑块(SSLs)、固体润滑膏(SLPs)以及自润滑复合材料(SLCs)四类高分子固体润滑材料(PSLMs)的研究进展,着重论述以水性环氧(WEP)、水性聚氨酯(WPU)、水性聚酰胺酰亚胺(WPAI)为粘结剂的水性粘结固体润滑涂层研究现状。最后,结合当前研发现状以及固体润滑技术在工业应用中的短板,展望了高分子固体润滑材料未来发展趋势。 相似文献