Flow-through sensor based on derivative synchronous fluorescence spectrometry for the simultaneous determination of pyrene,benzo(e)pyrene and benzo(ghi)perylene in water

A flow-through/first derivative synchronous spectrofluorimetric sensor for the determination of PAH has been described. This sensor has been used for the simultaneous determination of PAH mixtures (pyrene, benzo(e)pyrene and benzo(ghi)perylene). Linear calibration ranges between 10 and 500 ng/ml with acceptable precision (repeatability, expressed as relative standard deviation, smaller than 4.6%, and sampling frequency of 12 h(-1)) have been obtained. The method has been applied to the determination of the target analytes in spiked water samples with excellent results (recoveries between 94 and 108%).     

Synthesis and characterisation of poly[2,2-(m-phenylene)-5,5-bibenzimidazole] as polymer electrolyte membrane for high temperature PEMFCs

Intermediate-high molecular weight poly[2,2-(m-phenylene)-5,5-bibenzimidazole] has been produced by mixing 3,3′,4,4′-tetraminobiphenyl and isophthalic acid in polyphosphoric acid as polycondensing agent and triphenyl phosphite as catalyst. Polymers with intrinsic viscosities close to 1 were measured in 97% sulphuric acid. Membranes were prepared by solution casting and subsequently immersed in phosphoric acid in order to gain ionic conductivity. These membranes were characterised by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analyses, methanol permeation and conductivity measurements. Levels of acid and water absorbed by the membranes were measured and the kinetic of this process was studied. Finally, doped membranes were tested in an actual fuel cell setup, obtaining also information about gases crossover from the open circuit potential. Acceptably reproducible molecular weights between 115,000 and 190,000 were obtained allowing the casting of mechanically stable membranes, which showed a great affinity towards phosphoric acid, high thermal stability, and a conductivity of 0.039 S/cm at 190 °C with the membrane equilibrated in saturated air at 60 °C. Open circuit potential of a PBI membrane was 0.99 V, close to those of commercial perfluorinated membranes. A H₂/O₂ fuel cell with dry gases was able to produce a maximum power output of 0.22 W/cm² at 175 °C.     

Relevance of gaseous flows in electrochemically assisted soil thermal remediation

Treatment of polluted soil is one of the priorities in the search of a more sustainable planet. Electrochemically assisted soil remediation has been considered a good option for removing organic contaminants contained in soil, including the removal of volatile organic compounds, associated with gaseous streams produced during the treatment. Also, recently, electrochemical gas treatment technologies have been appointed as promising for the treatment of volatile organic compounds. In this work, we review the current opinion about the most recent studies in both areas. The first section focuses on the production of gaseous compounds during soil remediation by conventional and electrochemical systems. The second section describes the recent progress in the integration of adsorption and absorption with electrochemical processes. Finally, we discuss the holistic application of assisted electrochemical technologies in soil remediation, considering also emerging processes recently published in the literature.     

X‐ray absorption study of the local structure at the NiO/oxide interfaces

This work reports an X‐ray absorption near‐edge structure (XANES) spectroscopy study at the Ni K‐edge in the early stages of growth of NiO on non‐ordered SiO₂, Al₂O₃ and MgO thin films substrates. Two different coverages of NiO on the substrates have been studied. The analysis of the XANES region shows that for high coverages (80 Eq‐ML) the spectra are similar to that of bulk NiO, being identical for all substrates. In contrast, for low coverages (1 Eq‐ML) the spectra differ from that of large coverages indicating that the local order around Ni is limited to the first two coordination shells. In addition, the results also suggest the formation of cross‐linking bonds Ni—O—M (M = Si, Al, Mg) at the interface.     

Copper recovery by polymer enhanced ultrafiltration (PEUF) and electrochemical regeneration

In this work, the removal of Cu²⁺ from a synthetic effluent has been tested by means of polymer enhanced ultrafiltration (PEUF), using partially ethoxylated polyethylenimine (PEPEI) as water-soluble polymer. Overall, the two necessary steps of a hypothetical continuous process, metal retention (in total recirculation and discontinuous mode) and polymer regeneration (in discontinuous mode), have been confronted individually. On the one hand, the values of temperature (T), transmembrane pressure (ΔP), metal–polymer ratio and pH that maximize both, permeate fluxes and rejection coefficients, have been obtained by ultrafiltration tests, reaching Cu²⁺ retention coefficients higher than 97%. On the other hand, the polymer regeneration step has been carried out by the electrochemical technique, which consists in the metal electrodeposition on the cathode of an electrochemical cell. In a first step, cyclic voltammetries have been carried out to assure the polymer does not suffer any oxidation or reduction process. From these tests, a cathodic working potential has been selected to minimize hydrogen evolution reaction (−0.7 V vs. Ag/AgCl). Working at this voltage in deposition tests, a pH of 3.3 has been selected from experiments at different pH values. This pH is less extreme than the pH necessary if this step was carried out chemically (pH 2).     

Study of the influencing effect of pigments on the photoageing of terpenoid resins used as pictorial media

Terpenoid resins have been mainly used as components of pictorial varnishes and binding media from ancient times. In such latest instances, the resin is mixed with pigments affecting its physical and chemical properties. A new procedure based on gas chromatography-mass spectrometry (GC/MS) has been applied, in this work, in combination with Fourier transform infrared spectroscopy (FTIR), with the aim of determining the changes undergone by di- and triterpenoid resins employed as components of binding media. The GC/MS method is based on the derivatisation of these resins using trimethylsilylimidazol. Characterization of the main components of the di- and triterpenoid fractions and their oxidised products, occurring in the diterpenoid resin colophony and a triterpenoid Mexical copal (Bursera cuneata (Schl) Engl.), has been achieved. Artificially photoaged specimens of pure resin and binary systems pigment+resin prepared as thin films using lead white, ochre yellow, umber raw and verdigris have also been analysed to study the changes undergone by the di- and triterpenoid components of the resins. Oxidation processes taking place on di- and triterpenoids during photoageing are described. Moreover, the results obtained indicate that pigments have a different effect on the two studied resins. Thus, the presence of pigments induces, in general, a catalysing effect on the oxidative polymerisation reactions in the earliest stages of the natural curing of the paint films whereas a loss of the catalysing effectiveness, in particular, for verdigris containing specimens, is observed during photoageing. Complexation of diterpenoid molecules with copper(II) ions in the earliest stages of the curing has also been evidenced by FTIR analysis.     

An authentication case study: Antonio Palomino versus Vicente Guillo paintings in the vaulted ceiling of the Sant Joan del Mercat church (Valencia,Spain)

In 1695, the Valencian artist Vicente Guillo was engaged in painting the vault of the Sant Joan del Mercat church in Valencia, Spain. After preliminary work was carried out, his contract was cancelled. In 1697, Antonio Palomino, renowned for the publication of his technical treatise entitled El Museo Pictorio y Escala Optica, was finally selected as the painter in charge of decorating the vaulted ceiling of Sant Joan del Mercat. This paper reports an analytical study focused on the characterisation and discrimination of the palette and painting procedures used by Palomino and Guillo in the frescoes of Sant Joan del Mercat. For this purpose, Raman spectroscopy combined with light microscopy, scanning electron microscopy–X‐ray microanalysis, voltammetry of microparticles, X‐ray diffraction, Fourier transform infrared spectroscopy and gas chromatography–mass spectrometry has been employed. The use of gypsum as stucco material for the ground layers contrasts with the recommendations made by Palomino in his treatise about the convenience of using slaked lime‐sand mortars according to traditional fresco recipes. Although lead‐based pigments were not traditionally recommended for frescoes because of their empirically known alterations when subjected to strong alkaline fresco medium, both Guillo and Palomino used them. Palomino, probably supported by his personal experience as a painter, recommended and used Naples yellow, which has been found in a good state of preservation. In contrast, white lead areas found on Guillo's paintings have transformed into lead oxides. Other pigments found in the vaulted ceiling such as smalt, goethite, haematite, azurite and malachite have also undergone substantial changes because of the extreme temperature conditions to which they were subjected in the church. Copyright © 2012 John Wiley & Sons, Ltd.     

Identification by GC-FID and GC-MS of amino acids, fatty and bile acids in binding media used in works of art

GC-FID was used as single methodology for the identification and differentiation of proteins, lipids and ox bile from binders used in artistic paintings. The samples were hydrolyzed by HCl. Subsequently, the simultaneous formation of volatile derivatives of the amino, fatty and bile acids with ethyl chloroformate was performed quickly and safely in an aqueous medium. The derivatives were separated by capillary GC and characterized by GC-MS. The ageing of drying oils was studied, identifying pelargonic acid among other degradation products. Proteinaceous and lipoid binding media were characterized by means of the quotients between the areas of the peaks for each amino or fatty acid with respect to the area of the peak for alanine or palmitic acid. Fatty acids from ox bile were easily identified by their retention times characteristic for eicosanoic, docosanoic and pentadecanoic acids. The suggested method was applied to the analysis of binders in baroque paintings by Palomino in Valencia (Spain). Animal gelatine and linseed oil were found. Received: 27 September 2000 / Revised: 16 January 2001 / Accepted: 17 January 2001     

Enzymatic interference-free assay for oxalate in urine

A potentiometric method for the determination of oxalate in urine is proposed. It is based on the biochemical reaction catalyzed by oxalate decarboxylase/pervaporation/stopped-flow. The method affords a linear determination range between 0.03 and 0.08 mmol/l and has been successfully applied to the determination of oxalate in urine with excellent agreement of the results with those obtained by the conventional method based on precipitation/dissolution and titration. The effectiveness of the pervaporation process makes sample pretreatment other than dilution unnecessary. Received: 20 March 1996 / Revised: 28 May 1996 / Accepted: 31 May 1996