横向射流式单重态氧发生器的性能实验研究

 对氧碘化学激光器的单重态氧发生器（SOG）进行了改进，采用横向射流方式，并对该横向射流式单重态氧发生器的性能进行了检测。实验中过氧化氢碱溶液温度控制在－16℃左右,氯气流量为530mmol/s，He与氯气的流量比为3;采用PS法测量单重态氧分子的产率,吸收法测量氯气的利用率和相对水含量。得出如下结论:在不使用冷阱和分离器的情况下，最高单重态氧分子产率达到58%, 氯气利用率在80%以上,相对水含量小于等于0.5;气体达到最大流量时,发生器仍然能稳定地工作。     

关于强子中胶子分布函数的QCD预言

本文对Altarelli-Parisi方程采用Mellin变换方法解析地求得胶子分布函数的级数解析表达式,这个级数收敛得很快,利用它讨论了胶子分布函数的演化行为.     

High Power One- and Two-Order Cascaded Raman Lasers Based on Home-Made Phosphosilicate Fibre

One- and two-order cascaded Raman fibre lasers are demonstrated by using home-made P-doped Raman fibres.An output power of 2.8 W at 1245 nm with a slope efficiency of 33.4% and an output power of 2.0 W at 1495 nm with a slope efficiency of 23.5% are obtained with the pump source at 1069. 7nm.     

Theoretical Studies on the Si（001）-SiO2 Interface Structure

1 INTRODUCTION Silicon and its alloy have been widely applied in such fields as electronic industry, high-temperature structural ceramics, etc. In addition, the researches on silicon and its relevant materials greatly promote the rapid development of modern optics and infor- mation technology. Therefore, more and more at- tention is focused on the structure of silicon, oxide of silicon and the interfaces between silicon and metal or nonmetal. As an ideal passive film on the Si surface, S…     

Ⅱ型平面动力裂纹线场的弹塑性精确解

本采用线场分析方法对理想弹塑性Ⅱ型平面应力裂纹裂纹线附近的应力场及弹塑性边界进行了精确分析，本完全放弃了小范围屈服条件，探讨了弹塑性边界上弹塑性应力场匹配条件的正确提法，通过将裂纹线附近塑性区应力场的通解（而不是过去采用的特解）与弹性应力场的精确解（而不是通常的裂尖应力强度因子Ｋ场）在裂纹线附近的弹塑性边界上匹配，本得出了塑性区应力场，塑性区长度及弹塑性边界的单位法向量在裂纹线附近的足够精确     

利用喇曼光谱测量氧碘化学激光器氯气利用率的实验研究

 介绍了利用自发喇曼散射光谱测量氧碘化学激光器单态氧发生器氯气利用率的原理及实验装置，并给出了在以氮气作为稀释气的0.1mol/s射流式氧发生器上测试的结果，测试相对误差小于12%。由于该方法只需要通过测量喇曼谱线相对强度之比，即可算出氯的利用率，因此不需要另外的标定实验，从而避免了因标定带来的影响。该方法减小了测试误差，简化了实验过程，提高了测试效率。     

96MeV 16O+64Ni反应机制的研究

在96MeV ¹⁶O离子轰击下,测量了¹⁶O+⁶⁴Ni反应出射碎片(α直至O元素)的Wilczynski图和角分布,并提出DIC截面和反应时间等物理量;讨论了反应的DIC特征;看到了出射碎片α和Li主要来源于复合核蒸发的迹象.     

p-τ值对COIL的影响的实验研究

 实验研究了单重态氧发生器（SOG）的p-τ值，即初始氯气分压与停留时间的乘积，对化学氧碘激光器（COIL）的影响，并分析了诸多实验因素对SOG的p-τ值的影响。对于提高COIL的化学效率具有很重要的实际意义。     

Hydrothermal Synthesis and Crystal Structure of a Novel Isophthalate-bridged Copper(II) Polymer with Two-dimensional Network Structure: [Cu_2(phen)(ipt)_2]_(2n)·nH_2O (ipt = isophthalate, phen = 1,10-phenanthroline)

1 INTRODUCTION donor due to the presence of the protonated carboxyl group; (d) it can form short bridges via one car- Coordination polymers are of great interest due to boxylato end or long bridges via the benzene ring[7]. their physical properties and potential applications in We believe that coordination functionality of isoph- functional materials[1~3]. Aromatic polycarboxylic acids thalate can lead to interesting structures. In this com- such as 1,2,4,5-benzenetetracarboxylic acid[4],…     

Synthesis and Crystal Structure of N-（1-Phenyl-3-methyl-4-benzal-pyrazolone-5）-furoic Hydrazide

1 INTRODUCTION In recent years, investigations on the com- pounds containing hydrazide or hydrazone moieties have been increased considerably because of their potentially biological activities, especially as poten- tial inhibitors for many enzymes[1～5]. The presence of weak molecular interactions such as hydrogen- bonding controls the conformational and structural features which are important to the drug action[6, 7]. We have synthesized the photochromic compounds of pyrazolone thiosemi…