EXISTENCE OF PERIODIC SOLUTION OF A NEURONIC EQUATION

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｂｒａｉｎｏｆｍａｎｋｉｎｄｈａｓｍａｎｙｃｏｇｎｉｔｉｖｅｆｕｎｃｔｉｏｎｓｓｕｃｈａｓｌｅａｒｎｉｎｇ，ａｓｏｃｉａｔｉｏｎａｎｄｏｐｔｉｍｉｚａｔｉｏｎｅｔｃ．．Ｔｈｅｎｅｕｒｏｎｉｓｔｈｅｍｏｓｔｆｏｕｎｄａｍ...     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

聚甲醛自然老化的SEM研究

对户外曝晒3～36个月的聚甲醛(POM)老化形态进行了研究,讨论了老化层厚度,裂纹宽度、裂纹深度及断口形态与老化时间的关系。结果表明:POM的老化导致了材料内部结构由韧性变成脆性而几乎完全丧失物理机械性能。     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Triple Positive Solutions of Boundary Value Problems for High-order Fractional Differential Equation at Resonance with Singularities

In this paper, we investigate the existence of triple positive solutions of boundary value problems for high-order fractional differential equation at resonance with singularities by using the fixed point index theory and the Leggett-Williams theorem. The spectral theory and some new height functions are also employed to establish the existence of triple positive solutions. The nonlinearity involved is arbitrary fractional derivative, and permits singularity.     

The radioisotopic battery based on radio-voltaic effect

The radio-voltaic effect is investigated to be applied radioisotopic batteries in this work. The collection rates of the electron-hole pairs are 94 percent for the alpha particles emitted by²³⁹Pu source and 65 percent for the beta particles emitted by⁹⁰Sr-⁹⁰Y source. The maximum energy conversion efficiency got by the silicon element is about 16%. A prototype radioisotopic battery with¹⁴⁷Pm beta sources is constructed. Its maximum short-circuit current and off voltage are about 2 A and 190 mV respectively. The experimental data suggest that the life of the prototype battery may be more than three years.     

Dense Sphene-type Solid Electrolyte Through Rapid Sintering for Solid-state Lithium Metal Battery

The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li_1.125Ta_0.875Zr_0.125SiO₅ solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10^-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li⁺/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO₄ cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.     

水中脉冲放电金属电极烧蚀机理

采用板-板电极, 在放电间隙距离为2 mm、放电电流峰值为22 kA条件下, 对黄铜、钨铜电极的烧蚀特性进行了对比研究。利用高精度天平测量放电过程中的电极质量损失, 分别获取了阴极、阳极及总的平均烧蚀速率。通过放电后电极表面微观形貌、微观元素组成的分析及液体中金属离子的含量分析, 对水中脉冲放电金属电极的烧蚀机理进行了探讨。结果表明, 水中脉冲放电时, 钨铜电极的抗烧蚀性能明显高于黄铜电极。黄铜电极的主要烧蚀是以中心的大量孔洞及其边缘的波纹结构为表现形式的液体金属的溅射;钨铜电极的突出物及较平整的表面暗示了气相侵蚀的作用。以电弧的焦耳热效应为催化剂, 钨铜与水的电化学反应更为强烈, 因此电化学腐蚀是水中放电电极烧蚀的形式之一。     

Challenge and Solution of Characterizing Glass Transition Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers highly depend on their glass transition temperature (T _g). Differential scanning calorimetry (DSC) is commonly used to measure T _g of polymers. However, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T _g in such type of polymers. The changes in specific heat capacity (Δc _p) at T _g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δc _p from flexible polymer (0.28 J g^?1 K^?1 for polystyrene) to rigid CPs (10^?3 J g^?1 K^?1 for a naphthalene diimide‐based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δc _p at T _g by a factor of 10, confirming that backbone rigidity reduces the Δc _p. Additionally, an increase in the crystalline fraction of the CPs further reduces Δc _p. We conclude that the difficulties of determining T _g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D‐A CPs with weak transition signals. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1635–1644