Processing of Biomass Prior to Hydrogen Fermentation and Post-Fermentative Broth Management

Using bioconversion and simultaneous value-added product generation requires purification of the gaseous and the liquid streams before, during, and after the bioconversion process. The effect of diversified process parameters on the efficiency of biohydrogen generation via biological processes is a broad object of research. Biomass-based raw materials are often applied in investigations regarding biohydrogen generation using dark fermentation and photo fermentation microorganisms. The literature lacks information regarding model mixtures of lignocellulose and starch-based biomass, while the research is carried out based on a single type of raw material. The utilization of lignocellulosic and starch biomasses as the substrates for bioconversion processes requires the decomposition of lignocellulosic polymers into hexoses and pentoses. Among the components of lignocelluloses, mainly lignin is responsible for biomass recalcitrance. The natural carbohydrate-lignin shields must be disrupted to enable lignin removal before biomass hydrolysis and fermentation. The matrix of chemical compounds resulting from this kind of pretreatment may significantly affect the efficiency of biotransformation processes. Therefore, the actual state of knowledge on the factors affecting the culture of dark fermentation and photo fermentation microorganisms and their adaptation to fermentation of hydrolysates obtained from biomass requires to be monitored and a state of the art regarding this topic shall become a contribution to the field of bioconversion processes and the management of liquid streams after fermentation. The future research direction should be recognized as striving to simplification of the procedure, applying the assumptions of the circular economy and the responsible generation of liquid and gas streams that can be used and purified without large energy expenditure. The optimization of pre-treatment steps is crucial for the latter stages of the procedure.     

Preconcentration and determination of ceftazidime in real samples using dispersive liquid–liquid microextraction and high‐performance liquid chromatography with the aid of experimental design

A rapid and simple method for the extraction and preconcentration of ceftazidime in aqueous samples has been developed using dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography analysis. The extraction parameters, such as the volume of extraction solvent and disperser solvent, salt effect, sample volume, centrifuge rate, centrifuge time, extraction time, and temperature in the dispersive liquid–liquid microextraction process, were studied and optimized with the experimental design methods. Firstly, for the preliminary screening of the parameters the taguchi design was used and then, the fractional factorial design was used for significant factors optimization. At the optimum conditions, the calibration curves for ceftazidime indicated good linearity over the range of 0.001–10 μg/mL with correlation coefficients higher than the 0.98, and the limits of detection were 0.13 and 0.17 ng/mL, for water and urine samples, respectively. The proposed method successfully employed to determine ceftazidime in water and urine samples and good agreement between the experimental data and predictive values has been achieved.     

Preparation of various xanthene derivatives over sulfonic acid functionalized imidazolium salts (SAFIS) as novel,highly efficient and reusable catalysts

In this work, some novel sulfonic acid functionalized imidazolium salts (SAFIS), as a new category of ionic liquids, are synthesized by eco-friendly and simple procedures, and used as highly efficient and reusable catalysts to promote the following one-pot multicomponent organic transformations under solvent-free conditions: (i) the synthesis of 14-aryl-14H-dibenzo[a,j]xanthenes from β-naphthol (2 eq.) and arylaldehydes (1 eq.), (ii) the preparation of tetrahydrobenzo[a]xanthene-11-ones from β-naphthol, arylaldehydes and dimedone, and (iii) the synthesis of 1,8-dioxo-octahydroxanthenes from dimedone (2 eq.) and aromatic aldehydes (1 eq.). Environmentally benign, simple methodologies, easy workup procedure, clean reaction, short reaction time, high yield and easy preparation of the catalysts are some advantages of this work.     

Reaction of tert‐Butyl Isocyanide with Alkyl Propiolates in the Presence of α‐Chloroketones

tert‐Butyl isocyanide reacts with α‐chloroketones in the presence of alkyl propiolates in one pot to afford functionalized γ‐iminolactones as sole product in good yields.     

The physicochemical properties of polyhydroxyalkanoates with different chemical structures

A set of polyhydroxyalkanoates are synthesized, and a comparative study of their physicochemical properties is performed. The molecular masses and polydispersities of polyhydroxyalkanoates are found to be independent of their chemical structures. It is shown that the temperature characteristics and degrees of crystallinity of polyhydroxyalkanoates are affected by the chemical compositions of the monomers and their quantitative contents in the polymers. The incorporation of 4-hydroxybutyrate, 3-hydroxyvalerate, and 3-hydroxyhexanoate units into the chain of poly(3-hydroxybutyrate) decreases its melting point and thermal degradation temperature relative to these parameters of a homogeneous poly(3-hydroxybutyrate) sample (175 ± 5°C and 275 ± 5°C, respectively). The higher the content of the second monomer units in the poly(3-hydroxybutirate) chain, the greater the changes. The degrees of crystallinity of polyhydroxyalkanoate copolymers are generally lower than that of poly(3-hydroxybutyrate) (75 ± 5%). The effect on the ratio of the amorphous and crystalline phases of the copolymer samples becomes more pronounced in the series 3-hydroxy-valerate-3-hydroxyhexanoate-4-hydroxybutyrate. The prepared samples exhibit different properties ranging from rigid thermoplastic materials to engineering elastomers.     

A novel nanomagnetic solid acid catalyst for the synthesis of new functionalized bis-coumarin derivatives under microwave irradiations in green conditions

In this study, a novel, green, environmentally friendly and magnetically heterogeneous catalyst based on the immobilization of sulfosalicylic acid onto Fe₃O₄ nanoparticles (Fe₃O₄@sulfosalicylic acid MNPs) is reported. The bis-coumarin analogs were synthesized in high yield using the reaction of 1 equivalent of aryl aldehydes with 2 equivalents of 4-hydroxycoumarin in water under microwave irradiation conditions. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, thermogravimetric analysis, dynamic light scattering, vibrating sample magnetometry, Fourier transform infrared spectroscopy, UV–visible absorption, and Brunauer-Emmett-Teller (BET) techniques confirmed the successful synthesis of the catalyst. The main attractive characteristics of the presented green protocol are very short reaction times (10–15 min), excellent yields, and the avoidance of hazardous or toxic reagent and solvents. Thermal durability, easy separation, and high reusability are important advantages of the new catalyst in comparison to other catalysts.     

Physicochemical properties of multicomponent polyhydroxyalkanoates: Novel aspects

The physicochemical properties such as the degree of crystallinity and temperature and molecularmass characteristics of a number of polyhydroxyalkanoates of various chemical composition synthesized on a complex carbon substrate by bacteria Cupriavidus eutrophus В10646 have been investigated. Two-, three-, and four-component copolymer samples have different sets and ratios of monomers with various lengths of carbon chains: 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB), 3-hydroxyvalerate (3HV), 3-hydroxyhexanoate (3HH), 3-hydroxy-4-methyl valerate (3H4MV), and diethylene glycol (DEG). It has been shown that weight-average molar mass М _w and polydispersity vary in a wide range with no correlation existing with the composition of copolymer polyhydroxyalkanoates and that thermal stability is preserved in the temperature interval between the melting temperature and the thermal degradation temperature from 100 to 120–140°С. The composition and ratio of monomers most notably affect the degree of crystallinity of polyhydroxyalkanoates. Significant differences between the degrees of crystallinity of three- and four-component polyhydroxyalkanoates have been found for the first time. The degree of crystallinity for copolymers P(3HB/3HV/4HB) is 9–22%, and the degree of crystallinity for copolymers P(3HB/3HV/3HH) and P(3HB/3GV/3H4MV) is 41–63%; this value is close to the degree of crystallinity for diblock copolymers P(3HB)/DEG, which is 56–69%. For the four-component copolymers P(3HB/3GV/4HB/3HH), the degree of crystallinity is 30–41%. The values of М _w for the copolymers P(3HB/DEG) are inhomogeneous and the polymers contain fractions uneven with respect to molecular mass: a high-molecular-mass polymer (М _w from 2700 to 4900 kDa) and a low-molecular-mass polymer (М _w = 46–167 kDa). For the copolymers P(3HB)/DEG and P(3HB/3HV/3H4MV), two peaks are observed in the region of melting with the gap between these peaks being 4–20°С. All of the types of copolymer samples, regardless of the monomer ratio, show an increase in elongation at break against the background of a decrease in tensile stress and Young’s modulus, with these effects being pronounced to different extents. On the whole, the properties of multicomponent polyhydroxyalkanoates differ appreciably.     

Complexation of poly-bis-(3-silsesquioxanylpropyl)amino-sulfoxide and-sulfone with rare-earth elements

Polymers of silsesquioxane structure, poly[bis-(3-silsesquioxanyl-propylamino)]sulfoxide ( IV ) and -sulfone ( V ) have been prepared and examined as complexation agents toward samarium(III) and thulium(III). Polymer IV was an effective complexation agent toward both of these elements. However, polymer V was an effective complexation agent only toward thulium(III) ions. The selective complexation of polymer V with thulium is not affected by the presence of excess amounts of lanthanum, cerium, neodymium, or samarium salt. This suggests that polymer V may prove to be useful in rare-earth element (REE) separation and isolation. The selective complexation of V with thulium(III) is also observed in the presence of nickel(II), copper(II), or lead(II) salt.     

Synthesis and Investigation of Copper Complexes with Selected Azomethine Monobenzo Crown Ether Derivatives

Russian Journal of General Chemistry - A series of novel azomethine derivatives of benzo-18-crown-6, benzo-15-crown-5, and aniline as well as their complexes with copper(II) acetate have been...