Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

Material growth and device fabrication of terahertz quantum-cascade laser based on bound-to-continuum structure

The terahertz quantum-cascade laser （THz QCL） based on bound-to-continuum structure is demonstrated. The X-ray diffraction measurement of the material shows a high crystalline quality of the active region. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. The test device is lasing at about 3 THz and operating up to 60 K. It shows a single frequency property under different drive currents and temperatures. At 9 K, the maximum output power is greater than 2 mW with a threshold current density of 159 A/cm2.     

Catalyst-controlled diastereoselective ring-opening formal [3+2]-cycloadditions of arylvinyl oxirane 2,2-diesters with cyclic N-sulfonyl imines

A diastereoselectivity-controllable formal [3+2]-cycloaddition of arylvinyl oxirane 2,2-diesters with cyclic N-sulfonyl imines is developed, affording the corresponding tricyclic oxazolidine derivatives in moderate to excellent yields with excellent diastereoselectivities in the presence of palladium(0) or scandium(III) triflate. This protocol allows selective synthesis of diastereomers of tricyclic oxazolidine derivatives under switchable and mild conditions. Further transformations of the obtained products were conducted by removing ester groups and arylvinyl moieties.     

Laser-induced breakdown spectroscopy in Asia

Laser-induced breakdown spectroscopy (LIBS) is an analytical detection technique based on atomic emission spectroscopy to measure the elemental composition. LIBS has been extensively studied and developed due to the non-contact, fast response, high sensitivity, real-time and multi-elemental detection features. The development and applications of LIBS technique in Asia are summarized and discussed in this review paper. The researchers in Asia work on different aspects of the LIBS study in fundamentals, data processing and modeling, applications and instrumentations. According to the current research status, the challenges, opportunities and further development of LIBS technique in Asia are also evaluated to promote LIBS research and its applications.     

An Improved Approach for Practical Synthesis of 5-Hydroxymethyl-2′-deoxycytidine (5hmdC) Phosphoramidite and Triphosphate

5-Hydroxymethyl-2′-deoxycytidine (5hmdC) phosphoramidite and triphosphate are important building blocks in 5hmdC-containing DNA synthesis for epigenetic studies. However, efficient and practical methods for the synthesis of these compounds are still limited. The current research provides an intensively improved synthetic method that enables the preparation of commercially available cyanoethyl-protected 5hmdC phosphoramidite with an overall yield of 39% on 5 g scale. On the basis of facile and efficient accesses to cyanoethyl protected-5hmdU and 5hmdC intermediates, two efficient synthetic routes for 5hmdC triphosphate were also developed.     

MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

溶胶凝胶辅助水热可控合成ZnO不同形貌分级结构光催化剂

以Zn(NO₃)₂·6H₂O、柠檬酸和NaOH为原料,采用溶胶凝胶(sol-gel)辅助水热法,仅通过改变水热时间,就可得到片花、棒花及梭状3种不同形貌ZnO分级结构。利用XRD、SEM、UV-Vis DRS、光致发光光谱(PL)和氮低温吸附-脱附等手段对合成的ZnO样品进行了表征。推测了合成条件下不同形貌ZnO分级结构形成的机理。以活性翠兰(KGL)为模拟印染废水,考察了其光催化活性。结果表明,虽然所合成的不同形貌的ZnO样品在光照120 min后均能使KGL降解78%以上,但其中水热4 h得到的片花状ZnO光催化性能最好,可降解99%的KGL,这与其片花状的形貌、较大的比表面积、较多的表面氧缺陷和极性面有关。     

Zn4Si2O7(OH)2H2O盐修饰的纳米Ru催化剂催化苯选择加氢制环己烯

利用沉淀法制备了纳米Ru催化剂,在ZnSO₄存在下考察了Na₂SiO₃·9H₂O和二乙醇胺作反应修饰剂对Ru催化剂催化苯选择加氢制环己烯性能的影响,并用X-射线衍射(XRD)、X-射线荧光光谱(XRF)和透射电镜-能量散射谱(TEM-EDS)等物理化学手段对加氢前后Ru催化剂进行了表征。结果表明,在水溶液中Na₂SiO₃与ZnSO₄可以反应生成Zn₄Si₂O₇(OH)₂H₂O盐、H₂SO₄和Na₂SO₄,化学吸附在Ru催化剂表面上的Zn₄Si₂O₇(OH)₂H₂O盐起着提高Ru催化剂环己烯选择性的关键作用。Na₂SiO₃·9H₂O量的增加,生成的Zn₄Si₂O₇(OH)₂H₂O盐逐渐增加,Ru催化剂的活性降低,环己烯选择性逐渐升高。向反应体系中加入二乙醇胺,它可以中和Na₂SiO₃与ZnSO₄反应生成的硫酸,使化学平衡向生成更多的Zn₄Si₂O₇(OH)₂H₂O盐的方向移动,导致Ru催化剂环己烯选择性增加。当Ru催化剂与ZnSO₄·7H₂O、Na₂SiO₃·9H₂O和二乙醇胺、分散剂ZrO₂的质量比为1.0:24.6:0.4:0.2:5.0时,2 g Ru催化剂上苯转化73%时环己烯选择性和收率分别为75%和55%,而且该催化剂体系具有良好的重复使用性和稳定性。     

Synthesis of a novel host molecule of cross-linking-polymeric-beta-cyclodextrin-o-vanillin furfuralhydrazone and spectrofluorimetric analysis of its identifying cadmium

A novel host inclusion complex of cross-linking-polymeric-beta-cyclodextrin-o-vanillin furfuralhydrazone (beta-CDP-OVFH) was synthesized and characterized with IR and 1H NMR spectra to confirm its structure. The coordination reaction of the host reagent with Cd(2+) was studied and the optimum reacting conditions were observed carefully. A highly selective and sensitive spectrofluorimetric determination of trace amount of cadmium was proposed based on the reaction of Cd(2+) with beta-CDP-OVFH in ammonia water-ammonium acetate buffer medium of pH = 11.0. The molar ratio of beta-CDP-OVFH to Cd(2+) was 1:1. The maximum excitation and emission wavelengths were 393 and 494 nm, respectively. The linear range of this method was from 3.0 to 500 microg l(-1) with a detection limit of 0.80 microg l(-1). The effect of interferences in the determination of cadmium was investigated and the results showed that the host reagent had quite high capacity of identifying Cd(2+). The proposed method was successfully applied to the determination of trace amount of Cd(2+) in mussel and tea samples.