{[Gd(DMF)_3(DMSO)(H_2O)_3](μ-CN)[Fe(CN)_5]}·2H_2O的合成,结构表征和磁性(英文)

0IntroductionThefirstmolecule鄄basedmagnetswerereportedin1986[1].Duringthelasttwodecades,moreandmoreattentionhasbeenpaidtothesynthesisofmolecule鄄basedmagnets,especiallytoPrussianBlueanalogu鄄es[2].TheoldPrussianBlueanalogueshavebeenbroughtuptodateduetoth…     

Synthesis and structure of the metallic K6Tl17: a layered tetrahedral star structure related to that of Cr3Si

The title compound, the Tl-richest in the K-Tl system, has been synthesized in Ta containers via direct reaction of the elements at 400 degrees C followed by quenching to room temperature and subsequent annealing at 150 degrees C for 4 weeks. It crystallizes in the orthorhombic space group Cccm (No. 66) with a = 16.625(1) A, b = 23.594(2) A, c = 15.369(2) A (22 degrees C), and Z = 8. Two different Tl(12) units consisting of augmented tetrahedral stars are condensed into layers of such tetrahedra, and further Tl(2) dumbbells and the potassium cations also interconnect the stars and layers into a three-dimensional network. The former anionic Tl(8) subunits clearly resemble those in the heteroatomic 3-D structure of cubic Cr(3)Si before their augmentation with bridging atoms. The compound is metallic (rho(270) = 22.6 micro omega x cm, alpha = 0.0023 K(-)(1)) and shows Pauli-like paramagnetic susceptibility (chi(296) = 1.1 x 10(-4) emu/mol). EHTB calculations illustrate the importance of Tl p-orbital bonding, the positive Tl-Tl overlap populations up to E(F), and greater strengths of the Tl-Tl bonding between and about the surface of the augmented Tl(12) units. Cations between the thallium layers play specific and important roles in the structure.     

A(15)Tl(27) (A = Rb, Cs): A Structural Type Containing Both Isolated Clusters and Condensed Layers Based on the Tl(11) Fragment. Syntheses, Structure, Properties, and Band Structure

The isomorphous title compounds (and the ordered substitutional Rb(14)CsTl(27)) are obtained directly from reactions of the elements in sealed Ta below approximately 330 degrees C. Refinements of single-crystal data for the three established a structure with alternate layers of isolated pentacapped trigonal prismatic Tl(11)(7)(-) (D(3)(h)()) ions and condensed [Tl(16)(8-)] networks that are separated by cations. The condensed layer consists of Tl(11) units that share prismatic edges and are interbridged through waist-capping atoms (Tl(6/2)Tl(3)Tl(2)). (Rb(15)Tl(27): P&sixmacr;2m, Z = 1, a = 10.3248(6) ?, c = 17.558(2) ?.) The rubidium phase is a poor metal (rho(293) approximately 34 &mgr;Omega.cm) and is Pauli-paramagnetic. Extended Hückel band calculations indicate partially filled bands and a non-zero DOS at E(F), consistent with the observed metallic behavior, although appropriate cation tuning or modest anion doping should provide a Zintl phase. The band structure and COOP curves are also used to rationalize the distortion of the Tl(11) unit on condensation and the critical role of the interfragment bonds between waist-capping atoms in stabilizing the layer.     

Fast Fabrication and Judgement of Tip-Enhanced Raman Spectroscopy-Active Tips

The quality of the scanning tip is crucial for tip-enhanced Raman spectroscopy (TERS) experiments towards large signal enhancement and high spatial resolution. In this work, we report a controllable fabrication method to prepare TERS-active tips by modifying the tip apex at the atomic scale, and propose two important criteria to in-situ judge the tip's TERS activity for tip-enhanced Raman measurements. One criterion is based on the downshift of the first image potential state to monitor the coupling between the far-field incident laser and near-field plasmon; the other is based on the appearance of the low-wavenumber Raman peaks associated with an atomistic protrusion at the tip apex to judge the coupling efficiency of emissions from the near field to the far field. This work provides an effective method to quickly fabricate and judge TERS-active tips before real TERS experiments on target molecules and other materials, which is believed to be instrumental for the development of TERS and other tip-enhanced spectroscopic techniques.     

Influence of Atomistic Protrusion on the Substrate on Molecular Luminescence in Tunnel Junctions

Scanning tunneling microscope (STM) induced luminescence can be used to study various optoelectronic phenomena of single molecules and to understand the fundamental photophysical mechanisms involved. To clearly observe the molecule-specific luminescence, it is important to improve the quantum efficiency of molecules in the metallic nanocavity. In this work, we investigate theoretically the influence of an atomic-scale protrusion on the substrate on the emission properties of a point dipole oriented parallel to the substrate in a silver plasmonic nanocavity by electromagnetic simulations. We find that an atomic-scale protrusion on the substrate can strongly enhance the quantum efficiency of a horizontal dipole emitter, similar to the situation with a protrusion at the tip apex. We also consider a double-protrusion junction geometry in which there is an atomic-scale protrusion on both the tip and the substrate, and find that this geometry does provide significantly enhanced emission compared with the protrusion-free situation, but does not appear to improve the quantum efficiency compared to the mono-protrusion situation either at the tip apex or on the substrate. These results are believed to be instructive for future STM induced electroluminescence and photoluminescence studies on single molecules.     

Cu掺杂ZnO稀磁半导体磁电性能影响的模拟计算

在Cu重掺杂量摩尔数为0.02778–0.16667的范围内, 对ZnO掺杂体系磁电性能影响的第一性原理研究鲜见报道. 采用基于自旋密度泛函理论的平面波超软赝势方法, 用第一性原理计算了两种不同Cu单掺杂量Zn_1-xCu_xO (x=0.02778, 0.03125)超胞的能带结构分布和态密度分布. 结果表明, 掺杂体系是半金属化的稀磁半导体; Cu掺杂量越增加、相对自由空穴浓度越增加、空穴有效质量越减小、电子迁移率越减小、电子电导率越增加. 此结果利用电离能和Bohr半径进一步获得了证明, 计算结果与实验结果相符合. 在限定的掺杂量0.02778–0.0625 的条件下, Cu单掺杂量越增加、掺杂体系的体积越减小、总能量越升高、稳定性越下降、形成能越升高、掺杂越难. 在相同掺杂量、不同有序占位Cu双掺ZnO体系的条件下, 双掺杂Cu-Cu间距越增加, 掺杂体系磁矩先增加后减小; 当沿偏a轴或b轴方向Cu–O–Cu相近邻成键时, 掺杂体系会引起磁性猝灭; 当沿偏c轴方向Cu–O–Cu相近邻成键时, 掺杂体系居里温度能够达到室温以上的要求. 在限定的掺杂量0.0625–0.16667的条件下, 沿偏c轴方向Cu–O–Cu相近邻成键时, Cu 双掺杂量越增加, 掺杂体系总磁矩先增加后减小. 计算结果与实验结果变化趋势相符合.     

Probing Adsorption Configurations of Small Molecules on Surfaces by Single-Molecule Tip-Enhanced Raman Spectroscopy

Determining the adsorption configurations of organic molecules on surfaces, especially for relatively small molecules, is a key issue for understanding the microscopic physical and chemical processes in surface science. In this work, we have applied low-temperature ultrahigh-vacuum tip-enhanced Raman scattering (TERS) technique to distinguish the configurations of small 4,4′-bipyridine (44BPY) molecules adsorbed on the Ag(111) surface. The observed Raman spectra exhibit notable differences in the spectral features which can be assigned to three different molecular orientations, each featuring a specific fingerprint pattern based on the TERS selection rule that determines the distribution of the relative intensities of different vibrational peaks. Furthermore, such a small molecule can in turn act as a local probe to provide information on the local electric field distribution at the tip apex. Our work showcases the capability of TERS technique for obtaining information on adsorption configurations of small molecules on surfaces down to the single-molecule level, which is of fundamental importance for many applications in the fields of molecular science and surface chemistry.     

The asymptotic solution of particle growth in the convective undercooled melt driven by a biaxial straining flow

A dynamical system of particle growth in the convective undercooled melt driven by a biaxial straining flow is modeled. A uniformly valid asymptotic solution for the interface evolution in particle growth is obtained by means of the multiple variable expansion method. The analytical solution as a function of both azimuth angle and polar angle shows that the interface shape of particle growth in the biaxial straining flow is significantly deformed by the biaxial straining flow. The biaxial straining flow results in higher local growth rate near the surface where the flow comes in and leads to lower local growth rate near the surface where the flow goes out. Due to the difference in local growth rate, an initially spherical particle will evolve into a prolate barrellike shape in the biaxial straining flow.     

Interstitial vortex in superconducting film with periodic hole arrays

The response of superconducting Nb films with a diluted triangular and square array of holes to a perpendicular magnetic field are investigated.Due to small edge-to-edge separation of the holes,the patterned films are similar to multi-connected superconducting islands.Two regions in the magnetoresistance R(H) curves can be identified according to the field intervals of the resistance minima.Moreover,in between these two regions,variation of the minima spacing was observed.Our results provide strong evidence of the coexistence of interstitial vortices in the islands and fluxoids in the holes.     

胺基功能化的炭材料上二氧化碳吸附的密度泛函理论研究

本文利用色散作用校正的密度泛函理论研究了炭材料上含氮官能团对CO₂吸附的作用。通过计算比较了不同含氮官能团炭材料结构片段吸附二氧化碳后的结构参数和能量,由于较强的静电作用和形成弱氢键,含单个苯环的酰胺和吡啶类的吸附剂吸附二氧化碳的作用强于单个苯胺和吡咯类吸附剂。但当增加苯环数时,色散作用主导的吡咯型吸附剂的吸附能力显著增强。以上结果预示着酰胺和吡咯类将是大π体系中具有良好CO₂吸附性能的吸附剂。因而,色散作用在CO₂吸附过程中也占据着重要地位。计算得到的结果与我们之前的实验结果一致,并且将有利于筛选更有效的二氧化碳吸附剂。