健康猕猴血液和毛发微量元素含量的正常值测定和差异比较

对猕猴(Macaca mulatta)血液和毛发的镁、锰、钼、镍、铅、铬、镉、锌、铁、铜、钙等11种元素的含量，用电感耦合高频等离子体发射光谱仪进行了测定．给出了各个元素在血液和毛发中的平均含量值和变动范围．指出毛发中的微量元素含量一般较血液为高，且变动较小．与人体内含量比较，猴毛发的Cu、Mo、CA、Ni的含量与人发接近；猴血液的Zn、Fe、Ca、Mn、Ca亦与人的接近．对猴血液微量元素含量随年龄、体重、性别变化及血液含量和毛发含量的相关关系进行了统计学检验．通过对测定值的比较分析，认为尽管动物体内的微量元素含量随种类、环境、个体差异变化较大，就群体平均含量而言，仍存在着相似的变化规律。本文的测定结果对了解猕猴对微量元素的需要提供了初步依据．     

反相液体色谱中饱和醇保留行为的研究 Ⅰ.低碳醇保留行为与溶质分子结构的关系

本文从吸附-疏溶剂理论出发,根据热力学平衡观点,导出了一定固定相和流动相时,描述溶质保留行为与其分子结构关系的理论模型,并用之预测了饱和醇的保留值,获满意结果。从而表明本模型不但能用于同系物,而且亦可用于同分异构体及立体异构体保留行为的预测。     

毛蕊杜鹃挥发油化学成分研究

毛蕊杜鹃(Rhododendron tubulosum Ching ex wang wei-yei)系杜鹃花科杜鹃花属植物,分布于四川、西藏、甘肃和青海,其中青海分布最广,藏民常作为单方草药用于治疗肺炎和老年慢性气管炎,具有镇咳、祛痰作用,本文用自制的同时水汽蒸馏-溶剂萃取装置,从采自青海玉树州的毛蕊杜鹃鲜叶和嫩枝提取挥发油,用毛细管气相色谱-质谱和Kovats指数双重定性法对     

Use of Two-Dimensional Liquid Chromatography Combined with Diode-Array and Mass Spectrometric Detection for Analysis of Compounds in Flos Lonicera

Comprehensive two-dimensional liquid chromatographic separation by means of a combination of ion-exchange chromatography (IEC) and reversed-phase liquid chromatography (RPLC) has been realized and applied to the analysis of components of a traditional Chinese medicine Flos Lonicera. In the first dimension the components of a Flos Lonicera extract is separated on strong anion-exchange (SAX) column according to the charge-exchange properties of the components. In the second dimension the components are further fractionated by reversed-phase liquid chromatography (on ODS) on the basis of their hydrophobicity. The RPLC effluent is desalted and split and the components are identified on-line by use of both diode-array detection and mass spectrometry with atmospheric pressure chemical ionization (APCI–MS). In this way, the extract of Flos Lonicera can be rapidly separated, desalted, and analyzed, with determination of molecular weight. More than 58 components of an extract of Flos Lonicera were well resolved and six were tentatively identified from their UV and mass spectra.     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Physical and electrochemical characterizations of microwave-assisted polyol preparation of carbon-supported PtRu nanoparticles

PtRu nanoparticles supported on Vulcan XC-72 carbon and carbon nanotubes were prepared by a microwave-assisted polyol process. The catalysts were characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy (XPS). The PtRu nanoparticles, which were uniformly dispersed on carbon, were 2-6 nm in diameter. All PtRu/C catalysts prepared as such displayed the characteristic diffraction peaks of a Pt face-centered cubic structure, excepting that the 2theta values were shifted to slightly higher values. XPS analysis revealed that the catalysts contained mostly Pt(0) and Ru(0), with traces of Pt(II), Pt(IV), and Ru(IV). The electro-oxidation of methanol was studied by cyclic voltammetry, linear sweep voltammetry, and chronoamperometry. It was found that both PtRu/C catalysts had high and more durable electrocatalytic activities for methanol oxidation than a comparative Pt/C catalyst. Preliminary data from a direct methanol fuel cell single stack test cell using the Vulcan-carbon-supported PtRu alloy as the anode catalyst showed high power density.     

清洁催化氧化环己烯合成己二酸反应中酸性配体的作用

 以30％H2O2为氧源，研究了Na2WO4·2H2O催化氧化环己烯制己二\r\n酸反应中的配体效应．在大多数情况下，配体的酸性越强，目标产物己\r\n二酸的产率越高．尽管一些酚类配体、L（＋）抗坏血酸和8－羟基喹啉\r\n的酸性较弱，但己二酸的产率仍然很高．这表明影响目标产物产率的因\r\n素除配体的酸效应以外，还存在配体的配位效应．邻苯二酚和对苯二酚\r\n等酚类配体的实验结果表明，反应可能是通过络合催化反应机理完成的\r\n．对酸性配体用量及对反应动力学考察结果表明，反应过程中环氧化物\r\n水解为1，2－环己二醇是整个反应的控制步骤，反应体系的酸性起到决\r\n定性的作用．     

复式螺旋测微器螺距误差补偿与示值误差综合

本文简要介绍了复式螺旋测微器的设计原理,在复式螺旋运动误差分析的基础上,提出了一种螺距误差自动补偿方法。通过样机的螺距误差实测曲线和测微器示值误差检定结果,验证了它的可行性和示值误差综合的正确性。     

Three-dimensional subwavelength imaging by a photonic-crystal flat lens using negative refraction at microwave frequencies

We experimentally demonstrate subwavelength resolution imaging at microwave frequencies by a three-dimensional (3D) photonic-crystal flat lens using full 3D negative refraction. The photonic crystal was fabricated in a layer-by-layer process. A subwavelength pinhole source and a dipole detector were employed for the measurement. By point-by-point scanning, we obtained the image of the pinhole source shown in both amplitude and phase, which demonstrated the imaging mechanism and subwavelength feature size in all three dimensions. An image of two pinhole sources with subwavelength spacing showed two resolved spots, which further verified subwavelength resolution.