Photon channelling in foams

Experiments by Gittings, Bandyopadhyay and Durian (Europhys. Lett. 65, 414 (2004)) demonstrate that light possesses a higher probability to propagate in the liquid phase of a foam due to total reflection. The authors term this observation photon channelling which we investigate in this article theoretically. We first derive a central relation in the work of Gitting et al. without any free parameters. It links the photon's path-length fraction f in the liquid phase to the liquid fraction ɛ. We then construct two-dimensional Voronoi foams, replace the cell edges by channels to represent the liquid films and simulate photon paths according to the laws of ray optics using transmission and reflection coefficients from Fresnel's formulas. In an exact honeycomb foam, the photons show superdiffusive behavior. It becomes diffusive as soon as disorder is introduced into the foams. The dependence of the diffusion constant on channel width and refractive index is explained by a one-dimensional random-walk model. It contains a photon channelling state that is crucial for the understanding of the numerical results. At the end, we shortly comment on the observation that photon channelling only occurs in a finite range of ɛ.     

Topological analysis of the electronic charge density in the ethene protonation reaction catalyzed by acidic zeolite

In the present work, the distribution of the electronic charge density in the ethene protonation reaction by a zeolite acid site is studied within the framework of the density functional theory and the atoms in molecules (AIM) theory. The key electronic effects such as topological distribution of the charge density involved in the reaction are presented and discussed. The results are obtained at B3LYP/6-31G(**) level theory. Attention is focused on topological parameters such as electron density, its Laplacian, kinetic energy density, potential energy density, and electronic energy density at the bond critical points (BCP) in all bonds involved in the interaction zone, in the reactants, pi-complex, transition state, and alkoxy product. In addition, the topological atomic properties are determined on the selected atoms in the course of the reaction (average electron population, N(Omega), atomic net charge, q(Omega), atomic energy, E(Omega), atomic volume, v(Omega), and first moment of the atomic charge distribution, M(Omega)) and their changes are analyzed exhaustively. The topological study clearly shows that the ethene interaction with the acid site of the zeolite cluster, T5-OH, in the ethene adsorbed, is dominated by a strong O-H...pi interaction with some degree of covalence. AIM analysis based on DFT calculation for the transition state (TS) shows that the hydrogen atom from the acid site in the zeolitic fragment is connected to the carbon atom by a covalent bond with some contribution of electrostatic interaction and to the oxygen atom by closed shell interaction with some contribution of covalent character. The C-O bond formed in the alkoxy product can be defined as a weaker shared interaction. Our results show that in the transition state, the dominant interactions are partially electrostatic and partially covalent in nature, in which the covalent contribution increases as the concentration and accumulation of the charge density along the bond path between the nuclei linked increases.     

High precision delta(17)O isotope measurements of oxygen from silicates and other oxides: method and applications

The use of infrared laser-assisted fluorination to release oxygen from milligram quantities of silicates or other oxide mineral grains is a well-established technique. However, relatively few studies have reported the optimisation of this procedure for oxygen-17 isotope measurements. We describe here details of an analytical system using infrared (10 μm) laser-assisted fluorination, in conjunction with a dual inlet mass spectrometer of high resolving power ( approximately 250) to provide (17)O and (18)O oxygen isotope measurements from 0.5-2 mg of silicates or other oxide mineral grains. Respective precisions (1) of typically 0.08 and 0.04 per thousand are obtained for the complete analytical procedure. Departures from the mass-dependent oxygen isotope fractionation line are quantified by Delta(17)O; our precision (1) of such measurements on individual samples is shown to be +/-0.024 per thousand. In turn, this permits the offset between parallel, mass-dependent fractionation lines to be characterised to substantially greater precision than has been possible hitherto. Application of this system to investigate the (17)O versus (18)O relationship for numerous terrestrial whole-rock and mineral samples, of diverse geological origins and age, indicates that the complete data set may be described by a single, mass-dependent fractionation line of slope 0.5244+/- 0.00038 (standard error). Copyright 1999 John Wiley & Sons, Ltd.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.     

An alternative easy method for antibody purification and analysis of protein–protein interaction using GST fusion proteins immobilized onto glutathione–agarose

Immobilization of small proteins designed to perform protein–protein assays can be a difficult task. Often, the modification of reactive residues necessary for the interaction between the immobilized protein and the matrix compromises the interaction between the protein and its target. In these cases, glutathione-S-transferase (GST) is a valuable tag providing a long arm that makes the bait protein accessible to the mobile flow phase of the chromatography. In the present report, we used a GST fusion version of the 8-kDa protein serine protease inhibitor Kazal-type 3 (SPINK3) as the bait to purify anti-SPINK3 antibodies from a rabbit crude serum. The protocol for immobilization of GST-SPINK3 to glutathione–agarose beads was modified from previously reported protocols by using an alternative bifunctional cross-linker (dithiobis(succinimidyl propionate)) in a very simple procedure and by using simple buffers under physiological conditions. We concluded that the immobilized protein remained bound to the column after elution with low pH, allowing the reuse of the column for alternative uses, such as screening for other protein–protein interactions using SPINK3 as the bait.

A study of some parameters relevant to the response of harwell PMMA dosimeters to gamma and electron irradiation

The effects on the radiation response of Harwell polymethylmethacrylate (PMMA) dosimeters of dose-rate, radiation type, temperature during irradiation and post-irradiation storage, and post-irradiation stability, are of importance to the operators of commercial irradiation facilities.

This paper describes recent studies of the effects of some of these parameters on the radiation response of Harwell Red 4034, Amber 3042, and Gammachrome YR Perspex dosimeters, and provides data on batch to batch variation and shelf-life.     

Scaling Up of a Photoreactor for Formic Acid Degradation Employing Hydrogen Peroxide and UV Radiation

A model for scaling up a homogeneous photoreactor was developed and experimentally verified in a pilot‐plant‐size apparatus. The procedure is exemplified by the oxidation of dilute aqueous HCOOH solutions with UV radiation (254 nm) and H₂O₂. First, the kinetic model and the kinetic parameters of the HCOOH degradation were obtained in a well‐stirred, small, batch flat‐plate photoreactor (volume=70 ml). The method employed in the analysis of the experimental results yielded reaction‐rate expressions for HCOOH and H₂O₂ that were independent of the reactor configuration. These kinetic equations and the corresponding kinetic constants were then used in a mathematical, fully deterministic model of a continuous‐flow, 2‐m‐long, annular reactor (0.0065 m² of cross section for flow) operating in a laminar‐flow regime to predict exit concentrations of HCOOH. Irradiation was provided in both cases by two different types of germicidal lamps. No additional experiments were made to adjust the reactor‐model parameters. Theoretical predictions from the representation of the reactor performance obtained were compared with experimental data furnished by experiments in the much‐larger‐size, cylindrical‐flow reactor. Results showed good agreement for the range of variables explored; they corresponded to expected operating conditions in water streams polluted with low concentrations of organic compounds.     

Evaluation of UV-C induced changes in Escherichia coli DNA using repetitive extragenic palindromic-polymerase chain reaction (REP-PCR)

Ultraviolet radiation is an efficient inactivation method for a broad range of bacteria, viruses and parasites. Inactivation of microorganisms by UV-B and UV-C radiation is driven through modifications in their genomic DNA, being the most stable DNA-lesions different kinds of pyrimidine dimers (PDs) (e.g., cyclobutane pyrimidine dimers (CPDs) and other photoproducts). Taking into account that these modifications inhibit the DNA polymerization in vivo as well as in vitro, in the present work the usefulness of the REP-PCR assay to detect UV-induced changes in the Escherichia coli DNA was evaluated. In vitro amplification of DNA extracted at different times after UV treatment showed a disappearance of amplicons of higher size as time of treatment increases. When the bacteria were let to progress through their dark repair process, modifications in the electrophoretic patterns by REP-PCR were observed again. Amplified bacterial DNA tended to recover the profile showed at the beginning of treatment. In addition, the reappearance of bands of higher molecular size was associated to an increase in their signal intensity probably due to a higher amplification rate. Results of REP-PCR were correlated to the colony-forming ability of E. coli. It was concluded that REP-PCR appears as a rapid, robust, useful complementary methodology to monitor the impact of UV irradiation--at a molecular level--on the inactivation and the mechanisms of repair, applicable on a broad spectrum of microorganisms.     

On the molecular structure of uranium dicarbide: T-shape versus linear isomers

A theoretical study of the molecular structure of uranium dicarbide has been carried out employing DFT, coupled cluster, and multiconfigurational methods. A triangular species, corresponding to a (5)A(2) electronic state, has been found to be the most stable UC(2) species. A triplet linear CUC species, which has been observed in recent infrared spectroscopy experiments, lies much higher in energy. A topological analysis of the electronic density has also been carried out. The triangular species is shown to be in fact a T-shape structure with a U-C interaction which can be considered to be a closed-shell interaction.