Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

Extraction of Nitric,Perchloric, and Hydrochloric Acid by N,N-dibutyl Diethyl Carbamyl Phosphonate

Extraction of nitric, perchloric, and hydrochloric acid by N,N-dibutyl diethyl carbamyl phosphonate in carbon tetrachloride was investigated. The data obtained are treated in terms of stepwise neutralization of the acid with the formation of species y · HA and y · 2HA in the organic phase, where y stands for the extractant and HA for the acid. The equilibrium constants, K?₁ and K?₂ for nitric acid were found to equal 0.24 ± 0.02 and 0.017 ± 0.005, respectively. In case of HClO₄ and HCl K?₁ were found to equal 0.031 ± 0.003 and 0.0039 ± 0.0005, respectively. A third phase was observed when extraction of HClO₄ was performed using acid concentration higher than 3.5 molar. The preference for partition of different acids was discussed on the light of the competition of the proton between the acid anion, water and the basic extractant as well as the degree of the ionization of different acids.     

Ionic strength effects in the synergistic solvent extraction of Co2+

The extraction of Co²⁺ by a mixture of acetylacetone (acac) and pyridine (py) from an aqueous phase of varying ionic strengths has been investigated. The extraction studies were done at different temperatures in order to determine the effect of changes in the ionic strength on the free energy ΔG, enthalpy ΔH and entropy ΔS of the synergistic reaction.     

Cobalt(II), nickel(II) and copper(II) complexes of 5-(2-carboxyphenylazo)-2-thiohydantoin

A new series of hexacoordinate cobalt(II), nickel(II) and copper(II) complexes of 5-(2-carboxyphenylazo)-2-thiohydantoin HL having formulae [LM(OAc)(H₂O)₂] · nH₂O (M = Co^II, Cu^II and Ni^II), [LMCl(H₂O)₂] · nH₂O (M = Co^II and Ni^II), [LCuCl(H₂O)]₂ · 2H₂O, [LCu(H₂O)₃](ClO₄) and [LCu(HSO₄)(H₂O)₂] were isolated and characterized by elemental analyses, molar conductivities and magnetic susceptibilities, and by i.r., electronic and e.s.r. spectral measurements, as well as by thermal (t.g. and d.t.g.) analyses. The i.r. spectra indicate that the ligand HL behaves as a monobasic tridentate towards the three divalent metal ions via an azo-N, carboxylate-O and thiohydantoin-O atom. The magnetic moments and electronic spectral data suggest an octahedral geometry for Co^II complexes, distorted octahedral geometry for both Ni^II and Cu^II complexes with a dimeric structure for [LCuCl(H₂O)]₂ · 2H₂O through bridged chloro ligands. The X-band e.s.r. spectra reveal an axial symmetry for the copper(II) complexes with unsymmetrical M_s = ± 1 signal and G-parameter less than four for the dimeric [LCuCl(H₂O)]₂ · 2H₂O. The thermogravimetry (t.g. and d.t.g.) of some complexes were studied; the order and kinetic parameters of their thermal degradation were determined by applying Coats–Redfern method and discussed.     

Surface activity and thermodynamic of micellization and adsorption for isooctylphenol ethoxylates, phosphate esters and their mixtures with N-diethoxylated perfluorooctanamide

Three nonionic surfactants; p-isooctylphenol ethoxylates p-[i-OPE10], p-[i-OPE15], and p-[i-OPE20], were phosphorylated to produce three anionic phosphate ester surfactants. In addition, N-diethoxylated perfluorooctanamide (N-DEFOA) was also prepared. The surface and thermodynamic properties of the three types of surfactants and mixtures of the fluorocarbon surfactant (FC) with the hydrocarbon surfactants (HC) have been investigated. Surface tension as a function of concentration of the surfactant in aqueous solution was measured at 30, 40, 50 and 60°C, using the spinning drop technique. From these measurements the critical micelle concentration (CMC), the surface tension at the CMC (γ_CMC), the maximum surface excess concentration (Γ_max), the minimum area per molecule at the aqueous solution/air interface (A_min), and the effectiveness of surface tension reduction (π_CMC), were calculated. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) for these surfactants and their mixtures were also calculated. Structural effects on micellization, adsorption and effectiveness of surface tension reduction are discussed in terms of these parameters. The results show that the FC surfactant and its mixtures with HC surfactants enhance the efficiency in surface tension reduction and adsorption in the mixed monolayer at the aqueous solution/air interface, and also, reduce γ_CMC and the tendency towards micellization.     

Studies on the constituents of the green alga <Emphasis Type="Italic">Ulva lactuca</Emphasis>

Phytochemical investigations on a marine green alga Ulva lactuca led to the isolation of two new compounds (E)-6-heptacosen-5-one (1) and (E)-6-octadecen-5-ol (2), along with four known compounds, (Z)-10-hexacosene (3), docosanoic acid (4), palmitic acid (5), and isofucosterol (6). Compounds 3 and 4 were isolated for the first time from this species. The structures of the compounds were deduced with the help of modern spectroscopic techniques.     

Isothermal dimensional changes of some dental materials

The isothermal dimensional changes of four types of dental amalgams during the setting and for the next 24 hours after condensation have been studied by means of a Heraeus TA 500 thermal analysis system. The four types of dental amalgams were the lathe-cut conventional lowcopper amalgam (Amalcap), the spherical conventional low-copper amalgam (Spheralloy), the ternary unicomposition high-copper amalgam (Sybralloy) and the admixed high-copper (Dispersalloy) amalgam.The dimensional changes of the four types of amalgams are explained on the basis of their particle sizes and shapes and their constitutions.

---

Zusammenfassung Mittels eines Heraeus TA 500 Thermoanalysensystemes wurden isotherme Größenveränderungen von Dentalamalgamen während des Setting und der 24 Stunden nach der Kondensation untersucht. Die Größenveränderungen der vier Amalgamgrundtypen (am Beispiel von Amalcap, Spheralloy, Sybralloy und Dispersalloy) wurden auf der Grundlage ihrer Teilchengröße und -form sowie auf der Grundlage ihrer Zusammensetzung erklärt.

---

500 24 . : (), (), () ( ). , .