Interpretation of initial stage of 3C-SiC growth on Si(1 0 0) using dimethylsilane

The initial stage of cubic silicon carbide (3C-SiC) growth on a Si(0 0 1) surface using dimethylsilane (DMS) as a source gas was observed using scanning tunneling microscopy (STM) and reflection high-energy electron diffraction (RHEED). It was found that the dimer vacancies initially existing on the Si(0 0 1)-(2 × 1) surface were repaired by the Si atoms in DMS molecules, during the formation of the c(4 × 4) surface. From the STM measurement, nucleation of SiC was found to start when the Si surface was covered with the c(4 × 4) structure but before the appearance of SiC spots in the RHEED pattern. The growth mechanism of SiC islands was also discussed based on the results of RHEED, STM and temperature-programmed desorption (TPD).     

Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

Emission spectrographic determination of trace elements in atmospheric particulate matter

Air containing particulate material was passed continuously for one month through a low-volume air sampler equipped with a cyclone to exclude particulates greater than 10 μm in diameter. The samples and filters were ashed in a low-temperature plasma and, after addition of In₂O₃ support, palladium internal standard and graphite buffer, the ashes were analyzed by a.c. are emission spectrometry. Standard samples were prepared from a commercial standard containing 49 elements. The procedure allows the determination of 14 trace metals (Ag, Al, Cr, Cu, Fe, Ga, Mn, Mo, Ni, Pb, Sn, Ti, V, Zn) with relative standard deviations of 1.4–15.1%. The procedure has been applied successfully to monthly determinations of the average atmospheric concentrations of these elements in Kobe City for the past three years.     

Information theory of miniaturization advantages of column liquid chromatography for quantitative analysis

Summary The influences of decreasing column diameter and length on two analytical goals, the precision and solvent efficiency, in reversed-phase liquid-chromatography are studied. Low solvent consumption is one of analytical advantages of miniaturized columns and is shown to be quantitatively evaluated by the precision and solvent efficiency which are defined to be the total Shannon mutual information obtained from an assay and the information obtained in a unit solvent volume, respectively. Analysis of paraben food additives on a microbore column is taken as an example. In trace analysis, the relative standard deviation (RSD) of measurements theoretically derived from the precision is shown to approach to the observed ones.     

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) and its model compounds

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) were studied in comparison with those of the model formals obtained from stereoisomers of pentane-2,4-diol and heptane-2,4,6-triol in order to learn spectral changes due to differences of the steric structures of the polymer. In the NMR spectrum of transformal obtained from dl diol or dl,dl (syndiotactic) triol, all proton signals were well interpreted by assuming a rapid chair-chair inversion of the formal ring. On the other hand, no such inversion was observed spectroscopically in cis-formal obtained from the meso diol or meso,meso (isotactic) triol, and the cis-formal ring was supposed to take a diequatorial form preferentially. Consequently, dioxymethylene protons gave a single peak (equivalent) in trans-formal and an AB quartet (nonequivalent) in cis-formal. In the spectra of poly(vinyl formal), the dioxymethylene signal was an overlap of the singlet and quartet in dimethylsulfoxide solution. Observations of the spectra of various poly(vinyl formals) obtained from poly(vinyl alcohols) of different tacticities and study of temperature dependence of the signal have shown that the singlet and quartet are attributed to trans- and cis- formals, respectively, in the polymer spectrum also. In the infrared spectra of poly(vinyl formals), the 800 and 785 cm^-1 bands were found to be related to cis- and trans-formal rings respectively. A linear relationship was confirmed between D₇₈₅/D₈₀₀ and trans/cis ratios determined from the peak intensities of the dioxymethylene proton signals.     

1,2,4-Triazines, 9. The synthesis of novel 4-amino-1,6-dihydro-1,2,4-triazinones

3-Alkylthio-4-amino-1,6-dihydro-1,2,4-triazin-5(4H)-ones were synthesized by the reduction of 3-thio-4-amino-1,2,4-triazine-3,5(2.H,4H)-diones and successive S-alkylation. The regiospecific alkylation on the N-1 position or the exo amino group leads to a variety of 1,6-dihydro-1,2,4-triazin-5(4H)-one derivatives. An alternative synthesis of 3-thio-4-amino-1,6-dihydro-1,2,4-triazine-3,5(2H,4H)-diones was accomplished through the cyclization of 1-thiocarbohydrazidoacetamide derivatives.     

Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

Optimization of HPLC-ECD conditions for determination of catechins with precision and efficiency based on the FUMI theory.

A chemometric tool based on the Function of Mutual Information (FUMI) theory can provide a relative standard deviation (RSD) without repetitive measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD). Two parameters: precision (= information content) phi and efficiency (= information content/time) theta, which were calculated from predicted RSD based on the FUMI theory, were used to optimize HPLC-ECD conditions, such as applied potential, flow rate, column length, and size of ODS porous packing. We selected catechins as analytes, and found that the most optimum applied potential and flow rate were +600 mV vs. SCE and 0.9 mL/min, respectively, because they gave the largest phi and theta values. Buffer concentration in mobile phase is less effective for giving large phi and theta values. Since the FUMI theory makes it possible to predict RSD without repetitive measurements, the present method saves considerable amounts of chemicals and experimental time, and was found to be useful for the optimization of experimental conditions for determination by HPLC-ECD.     

1,2,4-triazines. III. A convenient and general synthesis of 4H-[1,3,4]thiadiazolo[2,3-c][1,2,4]triazin-4-ones

4H-[1,3,4]Thiadiazolo[2,3-c][1,2,4]triazin-4-ones were prepared by cyclization of 3-thio-4-amino-1,2,4-tri-azine-3,5(2H,4H)-diones with a variety of acids in the presence of concentrated sulfuric acid. The synthesis appears to be general.