Synthesis and characterizations of bis(phenoxy)‐amine tin(II) complexes for ring‐opening polymerization of lactide

A series of tin(II) complexes supported by N₂O₂ bis(phenol)‐amine ligands were prepared from the reactions of the corresponding ligands with Sn[N(SiMe₃)₂]₂ in benzene at room temperature. The ligands were designed to have different substituted group at the ortho‐position on the aryl rings (R = ^tBu, CH₃) and N‐containing side arm (E = ? CH₂NEt₂ and pyridine) giving a variation of tin(II) complexes (R = ^tBu, E = CH₂NEt₂, 2a ; R = ^tBu, E = py, 2b ; R = CH₃, E = CH₂NEt₂, 2c ; R = CH₃, E = py, 2d ). All complexes were characterized by NMR spectroscopy and single‐crystal X‐ray analysis. The single‐crystal X‐ray crystallography revealed that all complexes have a monomeric four‐coordinate tin center with a distorted seesaw structure. All complexes are active for solvent‐free polymerization of l ‐lactide at 120 °C giving poly(l ‐lactide) with narrow to moderate dispersity (Ð = 1.12–1.56). In the presence of benzyl alcohol during the polymerization, the resulting polymer was found to be linear having benzyl alcohol as the end group while, in the absence of benzyl alcohol, the polymer was cyclic. The large ^tBu group at the ortho‐position was found to decrease polymerization activity while the more basic ? CH₂NEt₂ group was found to increase the polymerization activity. The polymerization of rac‐lactide under a similar condition gave PLA having a slight heterotactic bias for all catalysts. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2104–2112     

Synthesis, characterization, and catalytic activity of nitrogen and iron(III) co-doped TiO2

The nitrogen and iron(III) co-doped TiO₂ (N–Fe–TiO₂) samples were synthesized via modified sol–gel method by using alkyl amine as both nitrogen source and pore directing agent. Morphologies and properties of the co-doped TiO₂ samples were investigated by X-ray diffraction, Fourier transform infrared spectroscopy, electron spin resonance spectroscopy, UV–Vis spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results showed anatase phase mixed with rutile structure as well as hydroxyl and amine functional groups. The presence of Fe³⁺ in N–Fe–TiO₂ sample was detected at g value of 2.00. In addition, the prepared samples were photocatalytically active for methyl orange degradation under UV light irradiation, but not under visible light.     

CoMFA and CoMSIA studies on a new series of xanthone derivatives against the oral human epidermoid carcinoma (KB) cancer cell line

Abstract  

A new series of xanthone derivatives against the oral human epidermoid carcinoma (KB) cancer cell line is examined to determine the relationship between the structural properties and the biological activity of these compounds—the 3-D quantitative structure–activity relationship (3D-QSAR)—using comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). The best CoMFA and CoMSIA models were obtained using the atom-based alignment of 33 compounds, 22 training compounds and 11 tested compounds, and these give desirable statistics; those for the CoMFA standard model were: r _cv² = 0.691, r ² = 0.998, S _press = 0.178, s = 0.014 and F = 1080.765, while CoMSIA combined steric, electrostatic, hydrophobic and hydrogen-bond acceptor fields: r _cv² = 0.600, r ² = 0.988, S _press = 0.206, s = 0.034 and F = 284.433. The 3D-QSAR models calculated satisfactory test set activities. The 3D-QSAR contour plots correlated strongly with the experimental data for the binding topology. For this reason, these results would be beneficial for predicting affinities with the compounds of interest, and they are advantageous for guiding the design and synthesis of new and more effective anticancer agents.     

CoMFA and CoMSIA studies on a new series of xanthone derivatives against the oral human epidermoid carcinoma (KB) cancer cell line

Abstract  A new series of xanthone derivatives against the oral human epidermoid carcinoma (KB) cancer cell line is examined to determine the relationship between the structural properties and the biological activity of these compounds—the 3-D quantitative structure–activity relationship (3D-QSAR)—using comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). The best CoMFA and CoMSIA models were obtained using the atom-based alignment of 33 compounds, 22 training compounds and 11 tested compounds, and these give desirable statistics; those for the CoMFA standard model were: r _cv² = 0.691, r ² = 0.998, S _press = 0.178, s = 0.014 and F = 1080.765, while CoMSIA combined steric, electrostatic, hydrophobic and hydrogen-bond acceptor fields: r _cv² = 0.600, r ² = 0.988, S _press = 0.206, s = 0.034 and F = 284.433. The 3D-QSAR models calculated satisfactory test set activities. The 3D-QSAR contour plots correlated strongly with the experimental data for the binding topology. For this reason, these results would be beneficial for predicting affinities with the compounds of interest, and they are advantageous for guiding the design and synthesis of new and more effective anticancer agents. Graphical abstract   A new and more effective anticancer agent of xanthone derivatives against the oral human epidermoid carcinoma (KB) cell line, as investigated by CoMFA and CoMSIA analysis     

Mass Spectrometry-Based Metabolomics of Phytocannabinoids from Non-Cannabis Plant Origins

Phytocannabinoids are isoprenylated resorcinyl polyketides produced mostly in glandular trichomes of Cannabis sativa L. These discoveries led to the identification of cannabinoid receptors, which modulate psychotropic and pharmacological reactions and are found primarily in the human central nervous system. As a result of the biogenetic process, aliphatic ketide phytocannabinoids are exclusively found in the cannabis species and have a limited natural distribution, whereas phenethyl-type phytocannabinoids are present in higher plants, liverworts, and fungi. The development of cannabinomics has uncovered evidence of new sources containing various phytocannabinoid derivatives. Phytocannabinoids have been isolated as artifacts from their carboxylated forms (pre-cannabinoids or acidic cannabinoids) from plant sources. In this review, the overview of the phytocannabinoid biosynthesis is presented. Different non-cannabis plant sources are described either from those belonging to the angiosperm species and bryophytes, together with their metabolomic structures. Lastly, we discuss the legal framework for the ingestion of these biological materials which currently receive the attention as a legal high.     

Scaling factors for vibrational frequencies and zero-point vibrational energies of some recently developed exchange-correlation functionals

The scaling factors for the vibrational frequencies and zero-point vibrational energies evaluated at various combinations of recently developed exchange-correlation functionals and various basis sets are reported. The exchange-correlation functionals considered are B972, B98, HCTH, OLYP, O3LYP, G96LYP, PBE0 and VSXC functionals; the basis sets employed are 3-21G, 6-31G*, 6-31G**, 6-31+G, 6-311G*, 6-311G**, 6-311G(df,p), 6-311+G(df,p), cc-pVDZ and aug-cc-pVDZ. The experimental harmonic frequencies of 122 small molecules and the zero-point vibrational energies of 39 small molecules are used to determine the scaling factors through the least-square fitting procedure. It was found that the scaling factors do not depend significantly on the basis sets considered. The vibrational frequency scaling factors evaluated by using the B98 and PBE0 functionals are recommended on the basis of smallest root mean square error. The zero-point vibrational energy scaling factors evaluated from the B972 functional with Pople's double-zeta basis set and the HCTH functional with Pople's triple-zeta basis set are recommended on the basis of smallest root mean square error.     

In Vitro and In Vivo Regulation of SRD5A mRNA Expression of Supercritical Carbon Dioxide Extract from Asparagus racemosus Willd. Root as Anti-Sebum and Pore-Minimizing Active Ingredients

Oily skin from overactive sebaceous glands affects self-confidence and personality. There is report of an association between steroid 5-alpha reductase gene (SRD5A) expression and facial sebum production. There is no study of the effect of Asparagus racemosus Willd. root extract on the regulation of SRD5A mRNA expression and anti-sebum efficacy. This study extracted A. racemosus using the supercritical carbon dioxide fluid technique with ethanol and investigated its biological compounds and activities. The A. racemosus root extract had a high content of polyphenolic compounds, including quercetin, naringenin, and p-coumaric acid, and DPPH scavenging activity comparable to that of the standard L-ascorbic acid. A. racemosus root extract showed not only a significant reduction in SRD5A1 and SRD5A2 mRNA expression by about 45.45% and 90.86%, respectively, but also a reduction in the in vivo anti-sebum efficacy in male volunteers, with significantly superior percentage changes in facial sebum production and a reduction in the percentages of pore area after 15 and 30 days of treatment. It can be concluded that A. racemosus root extract with a high content of polyphenol compounds, great antioxidant effects, promising downregulation of SRD5A1 and SRD5A2, and predominant facial sebum reduction and pore-minimizing efficacy could be a candidate for an anti-sebum and pore-minimizing active ingredient to serve in functional cosmetic applications.     

Morphology,Mechanical, and Water Barrier Properties of Carboxymethyl Rice Starch Films: Sodium Hydroxide Effect

Carboxymethyl rice starch films were prepared from carboxymethyl rice starch (CMSr) treated with sodium hydroxide (NaOH) at 10–50% w/v. The objective of this research was to determine the effect of NaOH concentrations on morphology, mechanical properties, and water barrier properties of the CMSr films. The degree of substitution (DS) and morphology of native rice starch and CMSr powders were examined. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were used to investigate the chemical structure, crystallinity, and thermal properties of the CMSr films. As the NaOH concentrations increased, the DS of CMSr powders increased, which affected the morphology of CMSr powders; a polyhedral shape of the native rice starch was deformed. In addition, the increase in NaOH concentrations of the synthesis of CMSr resulted in an increase in water solubility, elongation at break, and water vapor permeability (WVP) of CMSr films. On the other hand, the water contact angle, melting temperature, and the tensile strength of the CMSr films decreased with increasing NaOH concentrations. However, the tensile strength of the CMSr films was relatively low. Therefore, such a property needs to be improved and the application of the developed films should be investigated in the future work.     

High Substitution Synthesis of Carboxymethyl Chitosan for Properties Improvement of Carboxymethyl Chitosan Films Depending on Particle Sizes

This study investigated the effect of chitosan particle sizes on the properties of carboxymethyl chitosan (CMCh) powders and films. Chitosan powders with different particle sizes (75, 125, 250, 450 and 850 µm) were used to synthesize the CMCh powders. The yield, degree of substitution (DS), and water solubility of the CMCh powders were then determined. The CMCh films prepared with CMCh based on chitosan with different particle sizes were fabricated by a solution casting technique. The water solubility, mechanical properties, and water vapor transmission rate (WVTR) of the CMCh films were measured. As the chitosan particle size decreased, the yield, DS, and water solubility of the synthesized CMCh powders increased. The increase in water solubility was due to an increase in the polarity of the CMCh powder, from a higher conversion of chitosan into CMCh. In addition, the higher conversion of chitosan was also related to a higher surface area in the substitution reaction provided by chitosan powder with a smaller particle size. As the particle size of chitosan decreased, the tensile strength, elongation at break, and WVTR of the CMCh films increased. This study demonstrated that a greater improvement in water solubility of the CMCh powders and films can be achieved by using chitosan powder with a smaller size.