Binding position of azathioprine with bovine serum albumin determined by measuring nuclear magnetic resonance relaxation time.

The interaction between azathioprine (AZ) and bovine serum albumin (BSA) is mainly due to hydrophobic binding according to the dependence of the binding constant on the ionic strength obtained by equilibrium dialysis. The binding constant and partition coefficient of AZ were smaller than those of warfarin, phenylbutazone and ibuprofen. Little variation in the proton chemical shift of AZ was observed whether there was an absence or presence of BSA (7.25 x 10(-5) M). The spin-lattice relaxation time (T1) of AZ decreased in the presence of BSA to 6-22%. The spin-spin relaxation rate (1/T2) of AZ increased 16-24 times for the methyl group and the imidazole ring and 8-13 times for the purine ring in the presence of BSA. The ratio of the spin-spin relaxation rate of the free AZ to the bound AZ ((1/T2)b/(1/T2)f) of the methyl group and the imidazole ring was 2-3 times larger than that of the purine ring. The binding of AZ to BSA was concluded to be mainly at the methyl group on the imidazole ring of AZ.     

An enrichment method of molybdenum on a cellulose nitrate resin for the determination by electrothermal atomic absorption spectrometry coupled with the resin suspension injection.

Cellulose derivative resin (CDR) suspensions containing resin particles of cellulose nitrate (CDR(CN)), cellulose acetate (CDR(CA)), or cellulose triacetate (CDR(CTA)) were prepared as the sorbent for resin suspension injection (RSI) electrothermal atomic absorption spectrometry (ETAAS), in which fine resin particles holding a desired trace element were directly injected into the graphite tube as the suspension. To compare the sorption ability, the distribution ratios of the Mo(VI)-phenylfluorone complex were measured between the aqueous phase and the sorbents, including the CDRs mentioned above and the finely divided anion exchange resin (AR). The results showed that the sorption ability decreases in the following order: CDR(CN) > or = AR > CDR(CA) > or = CDR(CTA). It was concluded that CDR(CN) was able to extract more than 98% of Mo(VI), and was suitable for RSI-ETAAS as well as AR. CDR(CN) was used for the determination of Mo in NIES certified reference materials, No. 10 Rice flour-unpolished; the results showed fairly good agreements between the analytical values and the certified values.     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

Optical and electric properties of Nb-doped anatase TiO2 single crystal

Nb-doped anatase TiO₂ single crystal has been grown by chemical vapour transport method. Raman spectra shows that the obtained crystal with Nb of 0.08 wt% has typical anatase structure. An absorption band was observed at around 2.2 eV, which seems to be due to the d-d transition in the conduction band. The electron paramagnetic resonance and electric resistivity measurements show that the doped niobium makes quite shallow donor level whose orbital is d_xy-like centered at the titanium position of anatase.     

T-violation neutron experiment and polarized3He

An experimental scheme of the spin detailed balance in polarized neutron transmission through a polarized nuclear target is discussed for the T-violation test. The value of the spin detailed balance is estimated by using the data of the scattering amplitudes. The nuclear polarizations of proton,³He and¹³⁹La are discussed for the T-violation experiment.     

10-Gbit/s optical receiver using ICs with low-capacitance HBT technology

A 10-Gbit/s optical receiver is developed using low-capacitance HBT IC technology. The HBT allows a cutoff frequency of 45 GHz and a maximum oscillation frequency of 70 GHz. The receiver contains an automatic gain-control amplifier IC with a gain of 16 dB, a bandwidth of 10.7 GHz, and a decision-circuit IC with an ambiguity of 66 mVp-p at a data rate of 10 Gbit/s. The sensitivity of this receiver is -26.5 dBm at a bit error rate of 10^-9. Transmission over a 140-km fiber was achieved successfully.     

A new method for the synthesis of 1,3-oxathiolan-2-ones by the reaction of epoxides with sulfur and carbon monoxide

The convenient method for the synthesis of 1,3-oxathiolan-2-ones by the reaction of epoxides with elemental sulfur and carbon monoxide in the presence of catalytic amount of sodium hydride has been developed.     

Synthesis and chiroptical properties of optically active poly(ethynylcarbazole) derivatives: Substituent effect on the helix formation

Novel chiral acetylene monomers containing carbazole, 2‐ethynyl‐9‐[(S)‐2‐methylbutoxycarbonyl]carbazole ( 1 ), 3‐ethynyl‐9‐[(S)‐2‐methylbutoxycarbonyl]carbazole ( 2 ), 2‐ethynyl‐9‐[(S)‐2‐methylbutyl]carbazole ( 3 ), and 2‐ethynyl‐9‐[(S)‐4‐methylhexyl]carbazole ( 4 ) were synthesized and polymerized with [(nbd)RhCl]₂? Et₃N. The corresponding polyacetylenes with number‐average molecular weights ranging from 68,700 to 310,000 were obtained in good yields. Poly( 1 ) exhibited a large specific rotation and an intense Cotton effect in toluene, indicating that it formed a helix with predominantly one‐handed screw sense, while the other three polymers showed no evidence for taking a helical structure. Poly( 1 ) largely decreased the CD intensity upon heating from ?10 to 60 °C. Poly( 1 ) showed a Cotton effect in film state in a manner similar to solution state. No chiral amplification was observed in the copolymerization of 1 with achiral 2‐ethynyl‐9‐tert‐butoxycarbonylcarbazole ( 5 ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4450–4458, 2007     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003