Synthesis and characterization of molybdenum incorporated mesoporous aluminophosphate

A synthesis of molybdenum incorporated mesoporous aluminophosphate with long-chain n-alkylamine as template material had been prepared under non-aqueous condition. These materials were extensively characterized by using X-ray diffraction (XRD), nitrogen sorption isotherms, nuclear magnetic resonance of ²⁷Al and ³¹P (NMR), inductive coupled plasma (ICP), electron spin resonance (ESR), Fourier transform infrared (FTIR) and thermogravimetric-differential thermal analysis (TG-DTA). Morphology of the materials had been observed by using transmission electron microscope (TEM) that revealed the mesoporous materials possessed wormhole-like structures. Alkaline solvent extraction using n-butylamine/ethanol had been efficiently removed the n-alkylamine from the mesoporous samples which yielded BET surface areas around 550-730 m²/g. BJH analysis showed a narrow pore size distribution which increased with increasing of the carbon chain length of alkylamine (template). Valence state and coordination of the molybdenum in the obtained samples were investigated by using ESR and FTIR where it was found that Mo⁴⁺ and Mo⁶⁺ molybdenum species existed in the molybdenum incorporated mesoporous aluminophosphate in tetrahedral coordination.     

Temporal analysis of products (TAP) study on oxygen storage properties over Pt−Rh/CeO2 catalyst

The oxygen storage capacity of CeO₂, Ce_0.9Pr_0.1O₂, Pt?Rh/CeO₂ and Pt?Rh/Ce_0.9Pr_0.1O₂ was investigated by conventional GC pulse method and transient pulse techniques. It is shown that incorporation of PrO_y into CeO₂ matrix strongly promotes oxygen storage capacity (OSC) measured using the transient pulse technique. The improvement of OSC at low temperature is observed in Pt?Rh loaded onto CeO₂ and Ce?Pr catalysts.     

Synthesis of All Stereoisomers of Monomeric Spectomycin A1/A2 and Evaluation of Their Protein SUMOylation-Inhibitory Activity

A synthetic methodology to access all possible stereoisomers of spectomycin A1 (SMA1) and A2 (SMA2) has been established through late-stage diversification. The key reaction for the construction of all four diastereomers is an intramolecular cyclization based on the umpolung of π-allyl palladium species with bis(pinacolato)diborane (B₂(pin)₂). Silyl group assisted direct benzylic oxidation of each isomer enabled construction of the fragile β-hydroxytetralone skeleton to provide the SMAs. The relative and absolute stereochemistry of SMA2 was also determined, and the absolute stereochemistry of SMA1 was extrapolated based on the optical rotation of SMA2. The axial chirality of SMAs is discussed based on circular dichroism spectra and DFT calculations, and it is concluded that the M isomer is predominant in solution. Biochemical assessment of all isomers in vitro revealed that the C9 hydroxyl group and dimeric structure were both important for protein SUMOylation-inhibitory activity.     

Effects of post-deposition annealing on chemical composition of SiNx film in SiO2/SiNx/SiO2/Si stacked structure

To systematically evaluate the quality of SiN_x films in multi-stacked structures, we investigated the effects of post-deposition annealing (PDA) on the film properties of SiN_x within the SiO₂/SiN_x/SiO₂/Si stacked structure by performing X-ray photoelectron spectroscopy (XPS), X-ray reflectivity (XRR), Fourier transform infrared (FT-IR) spectroscopy, and scanning transmission electron microscope–electron energy loss spectroscopy (STEM-EELS) analyses. The XPS results showed that PDA induces the oxidation of the SiN_x layer. In particular, new finding is that Si-rich SiN_x in the SiN_x layer is preferentially oxidized by PDA even in multi-stacked structure. The XRR results showed that the SiN_x layer becomes thinner, whereas the interface layer between the SiN_x layer and Si becomes thicker. It is concluded by STEM-EELS and XPS that this interface layer is SiON layer. The density of N–H and Si–H bonding within the stacked structure strongly depends on the PDA temperature. Our study helps elucidate the properties of SiN_x films in stacked structures from various perspectives.     

Study of buried Si(1 1 1)-5 × 2-Au by surface X-ray diffraction

The structure of buried Si(1 1 1)-5 × 2-Au capped with amorphous Si was investigated using surface X-ray diffraction. It was found that the 5 × 2 structural periodicity is kept under the amorphous Si from the in-plane measurement. Furthermore, the intensity variation along the fractional-order rod indicates that Au atoms are located almost on the same plane.     

The effect of silica–alumina catalysts on degradation of polyolefins by a continuous flow reactor

Catalytic degradation of polyolefins was performed in a continuous flow reactor that allows the study of the degradation processes at steady state, characterized by constant values of reaction parameters and properties of the products. The continuous flow reactor was operated at atmospheric pressure and at feed rate of 0–1.5 kg h^?1 polyolefins over two silica–alumina catalysts having different SiO₂/Al₂O₃ mole ratio. Polyethylene (PE), polypropylene (PP) and polystyrene (PS) were degraded at 420, 380 and 360 °C respectively. The cracking effect of silica–alumina was proved by the increased amount of gaseous products and by the decreased molecular weight of liquid products. The differences in surface area and in concentration and acidic strength of active centers of the two catalysts affected the distribution of degradation products. Molar rate of degradation was increased in the presence of catalysts, however the mass rate of degradation was decreased leading to higher values of the calculated activation energies. These interesting results might open new perspectives in understanding the macroscopic mechanism for catalytic degradation of polyolefins.     

Pycnalin, a new α-glucosidase inhibitor from Acer pycnanthum

A new compound, pycnalin (1), together with four known compounds, ginnalins A (2), B (3), C (4), and 3,6-di-O-galloyl-1,5-anhydro-D-glucitol (3,6-di-GAG) (5), were isolated from Acer pycnanthum. The structure of 1 was determined on the basis of 2D-NMR spectral data and synthesis of 1. Pycnalin (1) is the first 1,5-anhydro-D-mannitol linked to a gallic acid, while compounds 2-5 were 1,5-anhydro-D-glucitol linked to gallic acids. All compounds were tested in vitro for α-glucosidase inhibitory and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities. Pycnalin (1) exhibited moderate α-glucosidase inhibitory activity as well as free radical scavenging activity. Ginnalin A (2) and 3,6-di-GAG (5), which have two galloyl groups, exhibited potent α-glucosidase inhibition, compared to those of other compounds 1, 3, and 4 containing a galloyl group. These results suggest that α-glucosidase inhibition is influenced by the number of galloyl groups.     

Studies on thermal degradation of acrylonitrile–butadiene–styrene copolymer (ABS-Br) containing brominated flame retardant

The thermal degradation of acrylonitrile-butadiene-styrene copolymer (ABS-Br; 10 g) containing brominated flame retardant (Br: 9.59 wt.%) was carried out at 450 °C using a semi batch operation using two different temperature programs. The heating rate was found to affect the quality of the degradation oil and yield of products (liquid, gas and residue). Data on the effect of the temperature program on the accumulation of liquid products was presented. It was found that the majority of the bromine was concentrated in the carbon residue and while majority of the nitrogen accumulates in the liquid products irrespective of degradation mode. The use of a one step constant heating rate process (I) produced a higher liquid yield (39%), than a two step process (29%). Differences were also noted in the Br and N contained in the liquids produced by the two processes.     

Silver(I) coordination polymers of fluorescent oligo(phenylenevinylene) with pi-pi stackings: luminescence and conductivity

Three luminescent silver(I)-oligo(phenylenevinylene) complexes, [Ag2(bmsb)(ClO4)2] (1), [Ag2(bmsb)(H2O)4](BF4)2 (2), and [Ag2(bdb)(CF3SO3)2] (3) (bmsb = 1, 4-bis(methylstyryl)benzene, bdb = 4,4'-bis(2, 5-dimethylstryryl)biphenyl), have been synthesized and structurally characterized. Complexes 1 and 2 are 2D networks with unique metallocyclophane motifs. Complex 3 affords a 2D zigzag sheet, in which silver triflates form tubelike double chains and bdb molecules act as linkages. Complex 2 exhibits high electric conductivity because of columnar aromatic stackings formed through intra- and intermolecular pi-pi interactions. Complexes 1-3 in the solid state exhibit luminescence, of which excitation and emission maxima are shifted to longer wavelength as compared to those of the corresponding metal-free ligands.     

Use of laser drilling in the manufacture of organic inverter circuits

Inverter circuits have been made by connecting two high-quality pentacene field-effect transistors. A uniform and pinhole-free 900 nm thick polyimide gate-insulating layer was formed on a flexible polyimide film with gold gate electrodes and partially removed by using a CO₂ laser drilling machine to make via holes and contact holes. Subsequent evaporation of the gold layer results in good electrical connection with a gold gate layer underneath the gate-insulating layer. By optimization of the settings of the CO₂ laser drilling machine, contact resistance can be reduced to as low as 3 Ω for 180 μm square electrodes. No degradation of the transport properties of the organic transistors was observed after the laser-drilling process. This study demonstrates the feasibility of using the laser drilling process for implementation of organic transistors in integrated circuits on flexible polymer films.