HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。     

The formation of mesoporous TiO2 spheres via a facile chemical process

The mesoporous TiO(2) solid and hollow spheres have been synthesized via a controllable and simple chemical route. Structural characterization indicates that these TiO(2) mesoporous spheres after calcined at 500 degrees C have an obvious mesoporous structure with the diameters of 200-300 nm for solid spheres and 200-500 nm for hollow spheres. The average pore sizes and BET surface areas of the mesoporous TiO(2) solid and hollow spheres are 6.8, 7.0 nm and 162, 90 m(2)/g, respectively. Optical adsorption investigation shows that TiO(2) solid and hollow spheres possess a direct band gap structure with the optical band gap of 3.68 and 3.75 eV, respectively. A possible formation mechanism for TiO(2) solid and hollow spheres is discussed.     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

Synthesis and photochromic properties of molecules containing [e]-annelated dihydropyrenes. Two and three way pi-switches based on the dimethyldihydropyrene-metacyclophanediene valence isomerization

The syntheses of several new simple negative, a simple positive, and multiple negative photochromes containing the dihydropyrene-cyclophanediene photochromic system are described. The photo-openings of the negative photochromes, the [e]-annelated benzo (7), naphtho (9), anthro (11), furano (19), and triphenyleno (15) derivatives of the parent 2,7-di-tert-butyl-trans-10b,10c-dimethyl-dihydropyrene (5), as well as its 4,5-dibromo derivative (13), are described to give the corresponding cyclophanedienes, as well as their photoclosures and thermal closures back to the dihydropyrenes. These are compared to the results obtained for the positive photochrome dibenzo[e,l]dihydropyrene (21) and to the bis(dihydropyreno)chrysene (44) and the (dihydropyrenobenzo)(benzo)metacyclophanediene (47) photochromes, which have more than one photochromic switch present and thus have more than a simple "on-off" state. Thermodynamic data are obtained for the thermal closing reactions. The anthrodihydropyrene (12) has the fastest thermal closing (tau(1/2) = 20 min), while the furanodihydropyrene (19') has the slowest (tau(1/2) = 63 h) at 46 degrees C. An electrochemical readout of the state of the switch is demonstrated for the benzodihydropyrene (7).     

Me4Bzo2[14]六烯(2-)N4金属配合物的结构和反应性研究——Ⅱ. ML和MLXx型配合物的电子吸收光谱研究

本文研究了ML及MLX_x型配合物电子吸收光谱的电荷转移谱带,求得了所用N₄大环配体的光学电负性值,证实金属的形式D_q值与成键有关.对阐明有关化合物的结构提供了新的证据.     

Tuning Ground States of Bis(triarylamine) Dications: From a Closed‐Shell Singlet to a Diradicaloid with an Excited Triplet State

Three bis(triarylamine) dications were isolated by using weakly coordinating anions. Their electronic structures in the ground state were investigated by various experiments in conjunction with theoretical calculations. The ground‐state electronic structures of these species were tunable by substituent effects, with two of them as closed‐shell singlets and one of them as an open‐shell singlet in the solid state. The excited state of the latter is thermally accessible, indicated by EPR and SQUID measurements. The work provides a new and stable diradicaloid structure motif with an excited triplet sate.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

火焰原子吸收分光光度法测定维血康颗粒中总铁

建立火焰原子吸收分光光度法测定维血康颗粒中总铁的含量,火焰类型选择空气–乙炔,测定波长为248.3 nm,测定时间为4.0 s,燃气流量为0.9 L/min,以氘灯作为背景校正。铁的质量浓度在2.4~28.8μg/mL范围内与吸光度呈良好的线性,线性相关系数r~2=0.999 8。6次测定结果的相对标准偏差小于1.0%,样品加样回收率为93.89%,方法检出限为0.011 3μg/mL。该方法具有准确度高,稳定性、重复性好等优点,可用于维血康颗粒中总铁含量的测定。     

Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

限域NiCo合金纳米颗粒高效催化生物质衍生物水相加氢脱氧

将储量丰富的生物质及其衍生物转化为具有高附加值的燃料和化学品被认为是一种有前景的绿色途径,可以极大地减少人们对传统化石资源的依赖.作为木质纤维素热解的直接产物和生物油升级的模型化合物,香草醛可以通过加氢脱氧(HDO)过程选择性地转化为2-甲氧基-4-甲基苯酚(MMP).MMP是一种有价值的化学品,常用于香料和药物等重要中间体的合成.在过去十年里,大量的金属催化剂被用来催化香草醛HDO转化为MMP.其中,贵金属(Pt,Pd,Ru和Au)虽然活性高,但是其储量低、价格昂贵,不利于工业化应用;而非贵金属(Fe,Co,Ni和Cu)的催化活性普遍较低,需要苛刻的反应条件来提高转化效率和选择性.此外,这类HDO反应大都在有机溶剂中进行,容易造成环境污染.因此,开发高效、稳定的非贵金属催化剂用于水相HDO反应是一个巨大的挑战.一般来说,合金纳米颗粒(NPs)具有强烈的协同效应,能产生良好的配位结构和电子环境,从而显著提升催化活性和选择性.基于此,本文首次采用了一种简单可控的合成方法来制备三聚氰胺海绵负载的氮掺杂碳纳米管(N-CNTs)限域的Ni-Co合金NPs(NiCo@N-CNTs/CMF)催化剂.该催化剂具有优异的HDO性能,在2 MPa H2,120oC反应6 h条件下,能在水相中将生物质衍生的香草醛高效转化为MMP,转化率和选择性均达到100％.相比于单金属的Ni@N-CNTs/CMF和Co@N-CNTs/CMF催化剂,香草醛转化率和MMP选择性都有大幅度的提高.而且,在温和的反应条件下,该催化剂对香草醛衍生物和其他芳香醛类化合物同样表现出优异的HDO性能,拥有100％的转化率以及较高的MMP选择性(91.5％～100％).XPS结果表明,Ni-Co形成合金后发生了电子结构的偏移,即Co原子可以从邻近的Ni原子处得到电子,提高Co电子云密度,从而促进对香草醛中C=O键的吸附.DFT计算结果表明,相比于单金属的Ni和Co,Ni-Co合金化后能显著提高对C=O键的选择性吸附和活化.同时,H2解离后形成的活性H*物种在Ni-Co合金NPs表面更容易脱附并参与催化反应.因此,Ni-Co@N-CNTs/CMF催化剂优异的HDO性能主要是由于Ni-Co合金NPs的协同作用大大促进了其对C=O键的选择性吸附和活化,以及活化氢物种的脱附.本文为设计和制备高效的非贵金属催化剂应用于水相的HDO反应提供了一个新策略.