Study on crystalline properties of Er-Si-O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

Er-Si-O crystalline compounds, which exhibit superlattice structures and sharp and strong Er-related 1.54 μm photoluminescence (PL) spectra at room temperature have been formed by self-assembling growth mechanism. Oxidation of the starting materials which have Si and Er at an atomic ratio of 2:1 are prepared and then oxidation and succeeding high-temperature annealing in Ar above 1250 °C cause a self-assembled superlattice-structured Er-Si-O crystalline compounds. The control of the ratio of Si and Er, as well as the following oxidation and annealing processes, is found to be sensitive to the crystalline properties, PL spectra and electrical properties. In this study, Er-Si-O crystalline thin films are formed on Si substrates by sol-gel and MOMBE methods, and their crystalline properties such as crystalline orientation and concentration ratio of Er, Si and O are investigated. Crystalline Er-Si-O films of high orientation are successfully grown on Si(1 0 0) and its inclined surface. The PL and excitation spectra, fluorescence decay and the electrical properties are found to be strongly related to the crystalline properties. Excess O causes a broader 1.54 μm PL spectra, slower fluorescence decay, lower carrier-mediated excitation and higher resistivity. A precise control of O is found to be necessary to grow superlattice-structured Er-Si-O compounds, which are semiconducting and are excitable via carrier-mediated excitation mechanism.     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

Hydrogenation of nitrobenzenes catalyzed by platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposite

Platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposites (Pt@G_n-NACl) were prepared and used as catalysts for hydrogenation of nitrobenzenes to anilines with molecular hydrogen under mild conditions. The as-prepared nanoparticles have mean particle size from 2.0 to 5.5 nm, depending on the molar ratio of the metal and the dendrimer. The Pt nanoparticles demonstrate near-monodisperse when the molar ratio of Pt and G₃-NACl is below 30. The interaction among three carboxyl groups terminated at the dendron and the metallic core keeps the Pt nanoparticles from agglomerating. The colloidal solution of Pt nanoparticles stabilized by the dendrimer, in which the molar ratio of Pt/G₃-NACl was less than 60, is stable without precipitation for several weeks. The dendrons attach to the metal core radially, and a substantial fraction of the surface of the metal nanoparticle is unpassivated and available for catalytic reactions. Turnover frequencies for the hydrogenation of nitrobenzenes to anilines change from 353 to 49 h⁻¹ depending on the dendrimer generation and substrates. The dendrimer catalysts are stable during the catalytic hydrogenation process and can be recovered by centrifugation and reused. The results suggest the effectiveness of polyaryl ether trisacetic acid ammonium chloride dendrimer as a stabilizer for the preparation of Pt nanoparticle catalysts.     

PtM/MxBy (M=Ni,Co, Fe) Heterostructured Nanobundles as Advanced Electrocatalyst for Hydrogen Evolution Reaction

Optimizing the electronic and synergistic effect of hybrid electrocatalysts based on Pt and Pt-based nanocatalysts is of tremendous importance towards a superior hydrogen evolution performance under both acidic and alkaline conditions. However, developing an ideal Pt-based hydrogen evolution reaction (HER) electrocatalyst with moderated electronic structure as well as strong synergistic effect is still a challenge. Herein, we fabricated boron (B)-doped PtNi nanobundles by a two-step method using NaBH₄ as the boron source to obtain PtNi/Ni₄B₃ heterostructures with well-defined nanointerfaces between PtNi and Ni₄B₃, achieving an enhanced catalytic HER performance. Especially, the PtNi/Ni₄B₃ nanobundles (PtNi/Ni₄B₃ NBs) can deliver a current density of 10 mA cm⁻² at the overpotential of 14.6 and 26.5 mV under alkaline and acidic media, respectively, as well as outstanding electrochemical stability over 40 h at the current density of 10 mA cm⁻². Remarkably, this approach is also universal for the syntheses of PtCo/Co₃B and PtFe/Fe₄₉B with outstanding electrocatalytic HER performance.     

Facile electrochemical synthesis of a conducting copolymer from 5-aminoindole and EDOT and its use as Pt catalyst support for formic acid electrooxidation

5-Aminoindole and 3,4-ethylenedioxythiophene (EDOT) were copolymerized electrochemically on a carbon cloth (CC) electrode in an aqueous sulfuric acid solution. The as-prepared copolymer was characterized by cyclic voltammogram, SEM, and UV-vis and FT-IR spectra through which the electrochemical properties, structure, and composition of the as-obtained copolymer were determined. The electrochemical activity and stability of the as-formed copolymer are significantly improved in comparison with poly(5-aminoindole) due to the incorporation of EDOT units into the conjugated chain. The copolymer film-modified CC electrode was used as substrate for Pt particle deposition (denoted as Pt/copolymer/CC), and then, its catalytic activity towards formic acid electrooxidation was studied. Experimental results indicate that the catalytic activity of Pt/copolymer/CC towards formic acid electrooxidation is enhanced in comparison with that of Pt/homopolymer/CC, which can be attributed to the homogeneous distribution of Pt nanoparticles on the copolymer/CC substrate and the improved electrochemical activity of the copolymer film.     

Synthesis and Magnetic Properties of Pt3Co/Fe3O4 Nanocomposites

Bimagnetic Pt₃Co/Fe₃O₄ nanocomposite is synthesized in aqueous solution. The nanoparticles are characterized with TEM, FTIR, and magnetic measurements. The as‐synthesized nanocomposite exhibits ferromagnetic properties at room temperature due to the exchange coupling between Pt₃Co and Fe₃O₄. Magnetic properties of Pt₃Co/Fe₃O₄ nanoparticle can be tuned by varying of the molar ratio of iron to platinum. Pt₃Co/Fe₃O₄ nanoparticles exhibit higher saturation magnetization when the molar ratio of iron to platinum is 1.     

载体对负载型TiO2催化剂光催化性能的影响

 以活性碳（AC）和镁铝尖晶石（MA）为载体，采用真空吸附水解法制备了负载型光催化剂TiO2／AC和TiO2／MA，并采用TiO2溶胶负载法制备了活性碳负载催化剂TiO2（C）／AC．以氯仿为探针分子研究了其在催化剂上的吸附及光催化降解反应性能．结果表明，催化剂的制备方法、TiO2负载量与载体的吸附性能对光催化活性有明显的影响．通过优化制备条件，TiO2／AC催化剂的催化活性可提高到纳米TiO2的2．5倍．氯仿在AC上的饱和吸附量较高，但吸附强度较弱；在纳米TiO2上的吸附情况则正好相反．氯仿在AC和TiO2上吸附性质的差异有利于吸附在TiO2／AC上的氯仿分子从活性碳载体向TiO2光催化活性中心迁移．镁铝尖晶石载体对光催化反应没有明显的促进作用，与其基本上不吸附氯仿分子有关．与TiO2胶体负载法相比，真空吸附水解法是一种较好的负载型TiO2光催化剂制备方法．     

One-step electrodeposition of platinum nanoflowers and their high efficient catalytic activity for methanol electro-oxidation

A facile, one-step and template-free electrodeposition method has been developed for the first time to prepare porous Pt nanoflowers. The flowerlike architectures were confirmed by SEM, and further structurally characterized by XRD and electrochemical analyses. Compared to conventional nanosized Pt catalysts, as-prepared Pt nanoflowers exhibit remarkably higher catalytic activity and stronger poisoning-tolerance for the methanol electro-oxidation, and thus they are anticipated to find interesting applications in many important fields such as energy and catalysis.     

Microwave-resonance-induced resistivity: evidence of ultrahot surface-state electrons on liquid 3He

Measurements of the dc resistivity of surface-state electrons on liquid helium exposed to microwave radiation are reported. It is shown that the resonant microwave excitation of surface-state electrons is accompanied by a strong increase in their resistivity, which is opposite to the result expected from the previously used two-level model. We show that even a very small fraction of electrons excited to the first excited state and decaying back due to vapor-atom scattering strongly heat the electron system, causing a population of higher subbands. The calculated resistivity change is in good agreement with the observed data.