A simple and sensitive method for the determination of hydroxylamine in fresh-water samples using hypochlorite followed by gas chromatography.

A new and simple method for the determination of hydroxylamine in environmental water, such as fresh rivers and lakes using hypochlorite, followed by its gas choromatographic detection, has been developed. A glass vial filled with sample water was sealed by a butyl-rubber stopper and aluminum cap without head-space, and then sodium hypochlorite solution was injected into the vial through a syringe to convert hydroxylamine to nitrous oxide. The head-space in the glass vial was prepared with 99.9% grade N2 using a gas-tight syringe. After the glass vial was shaken for a few minutes, nitrous oxide in the gas-phase was measured by a gas chromatograph with an electron-capture detector. The dissolved nitrous oxide in the liquid-phase was calculated according to the solubility formula. The proposed method was applied to the analysis of fresh-water samples taken from Iu river and Hii river, flowing into brackish Lakes Nakaumi and Shinji, respectively.     

Neutron activation analysis of iodine in soil

A simple pre-irradiation procedure for the separation of iodine from soil has been developed. A soil sample was heated in a quartz tube for 15 min at about 900 °C. The evaporated iodine was collected in activated charcoal, which was produced from phenol resin with low impurities. The charcoal, with sorbed iodine, was irradiated by neutrons and the¹²⁸I produced was measured. A successful elimination of the background radioactivity due to the matrix elements was possible with this separation procedure. The detection limit by this method for soil samples was about 0.1 mg/kg (dry). The method has been applied to analyze selected soil samples.     

Affine scaling algorithm fails for semidefinite programming

In this paper, we introduce an affine scaling algorithm for semidefinite programming (SDP), and give an example of a semidefinite program such that the affine scaling algorithm converges to a non-optimal point. Both our program and its dual have interior feasible solutions and unique optimal solutions which satisfy strict complementarity, and they are non-degenerate everywhere.     

Second-order necessary optimality conditions for domain optimization problems of the Neumann type

In this paper, we treat a domain optimization problem in which the boundary-value problem is a Neumann problem. In the case where the domain is in a three-dimensional Euclidean space, the first-order and the second-order necessary conditions which the optimal domain must satisfy are derived under a constraint which is the generalization of the requisite of constant volume.Portions of this paper were presented at the 13th IFIP Conference on System Modelling and Optimization, Tokyo, Japan, 1987.     

Friction coefficient and structural transition in a poly(acrylamide) gel

The friction coefficient between the polymer network of an opaque poly(acrylamide) gel and water is measured as a function of the mole fraction of cross linker. The friction coefficients of opaque gels are 4 to 5 orders of magnitude smaller than those of the transparent gels. This drastic decrease in friction occurs when the mole fraction of cross linker is 0.2. In opaque gels, the friction coefficient of gels and the mole fraction of cross linker are related by a power law. The network structure of the opaque gels used in the friction measurements is examined with a confocal laser scanning microscope. The opaque gel network consists of a fractal aggregate of colloidal particles. The radius of particles and the volume occupied by the particles depend on the mole fraction of cross linker. Both relationships are well described by the power laws. The power law of the friction coefficient is well explained in terms of the power laws of the structural parameters and the Stokes equation of the hydrodynamic friction for the spherical particle. It indicates that the friction of the opaque gel is determined simply by the structure of the polymer network.     

Determination of129I and127I in environmental samples by neutron activation analysis (NAA) and inductively coupled plasma mass spectrometry (ICP-MS)

In order to assess the levels and behavior of¹²⁹I (half-life: 1.6×10⁷ y) and¹²⁷I (stable) in the environment, we have developed analytical procedures involving neutron activation analysis (NAA). Environmental samples collected around Tokaimura, Ibaraki Prefecture, Japan, have been analyzed using this method. Ranges of¹²⁹I and¹²⁷I concentrations in surface soil were 0.9–180 mBq kg^–1 and 1–60 mg kg^–1, respectively. Higher¹²⁹I concentrations were found in soil samples collected from coniferous forests, suggesting a contribution from tree canopies in the deposition of this nuclide. Most of the¹²⁹I in soil, was found to be retained in the first 10 cm. The¹²⁹I/¹²⁷I ratios in wheat fields were lower than those in rice paddy fields.A soil sample collected by IAEA from an area contaminated by the Chemobyl accident was also determined. The¹²⁹I concentration and the¹²⁹I/¹²⁷I ratio were 1.6 mBq kg^–1 and 1.7×10^–7, respectively. The¹²⁹I level in this sample was higher than the values obtained in areas far from nuclear facilities in Japan. It was suggested that the analysis of¹²⁹I in soils in the Chernobyl area may be useful in evaluating the¹³¹I levels at the time of the accident.Analyses of¹²⁹I and¹²⁷I by ICP-MS in water samples were also made. The analytical speed of this method was very high, i.e., 3 minutes for a sample. However, there is a sensitivity limitation for¹²⁹I detection due to interference from¹²⁹Xe with the¹²⁹I peak. The detection limits for¹²⁹I and¹²⁷I in water samples were about 0.5 mBq ml^–1 and 0.1 ng ml^–1, respectively.     

Neutron activation analysis of iodine-129 and iodine-127 in environmental samples

The possibilities of reactor induced (n, p) reactions as a tool for neutron activation analysis of titanium in geological samples are discussed. The interference of calcium and scandium is experimentally evaluated. Results for Ti, Ca and Sc in GSP-1 and PCC-1 standard rocks are presented. On the basis of the experimental values, it is concluded that the⁴⁷Ti(n, p)⁴⁷Sc reaction is the most favourable for titanium determination.     

Syntheses of fluorine-containing fused polycyclic compounds: photo-cycloaddition of indene to cyclic fluoro-olefins and some reactions concerning the adducts

Acetophenone photo-sensitized addition of indene to cyclic fluoro-olefins (1,2-dichlorohexafluorocyclopentene-1, 1,2-dichlorotetrafluorocyclobutene-1 and hexafluorocyclobutene) gave the corresponding cycloadducts in satisfactory yields. The cycloadducts obtained predominantly had exo configuration.Some reactions such as reduction, oxidation, dechlorination and halogenation, of the cycloadducts were also studied.