Formation of Supramolecular Nanostructures through in Situ Self-Assembly and Post-Assembly Modification of a Biocatalytically Constructed Dipeptide Hydrazide**

Aqueous self-assembly of short peptides has attracted growing attention for the construction of supramolecular materials for various bioapplications. Herein, we describe how the thermolysin-assisted biocatalytic construction of a dipeptide hydrazide from an N-protected amino acid and an amino acid hydrazide leads to the formation of thermally stable supramolecular hydrogels. In addition, we demonstrate the post-assembly modification of the supramolecular architectures constructed in situ tethering hydrazide groups as a chemical handle by means of fluorescence imaging.     

Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Extended Open-Chain Polyenides as Versatile Delocalized Anion Ligands for Metal Chain Clusters

Although small cyclic- and open-chain unsaturated hydrocarbon anions such as cyclopentadienide and open-chain pentadienide are used as the strongly electron-donating auxiliary ligands for metal complexes, more extended π-conjugated unsaturated hydrocarbon anions have rarely been used in coordination chemistry, despite their potential ability to serve as the multiply bridging π-ligands for metal clusters. This work reports isolation of metal chain clusters bearing the multi-dentate, open-chain extended unsaturated hydrocarbon anion ligands. The extended open-chain π-conjugated polyenyl ligands could effectively stabilize oxidized palladium chains, including an unprecedented [Pd₄]⁴⁺ chain.     

Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

Measurement of circular dichroism spectra of liquid/liquid interface by centrifugal liquid membrane method.

The direct measurement of the circular dichroism (CD) spectra of liquid/liquid interface has been achieved for the first time by the centrifugal liquid membrane (CLM) method combined with a conventional CD spectropolarimetry. In the sample chamber of the CD spectropolarimeter, a cylindrical glass cell containing small amounts of organic and aqueous phases was rotated at ca. 7000 rpm to generate a two-phase liquid membrane with a high specific interfacial area. The CD spectra of the J-aggregate of protonated 5,10,15,20-tetraphenylporphyrin formed at the toluene/sulfuric acid interface in the rotating cell have been measured. The results demonstrated the novelty and advantages of this method.     

Convenient synthesis of alkoxyhalosilanes from hydrosilanes

Selective dehydrogenative coupling of di- and trihydrosilanes with alcohols catalyzed by PdCl₂ or NiCl₂ afforded alkoxyhydro- and dialkoxyhydrosilanes in good yield. Further treatment of the resulting alkoxyhydrosilanes with carbon tetrachloride or allyl bromide in the presence of the same catalyst led to the formation of alkoxychloro- and alkoxybromosilanes, respectively. Similar reactions of dialkoxyhydrosilanes with carbon tetrachloride afforded dialkoxychlorosilanes in good yield, although contamination of small amounts of trialkoxysilanes and alkoxydichlorosilanes was detected in the products. Selective substitution of the alkoxyhalosilanes with nucleophiles is also reported.     

A precision measurement of the hyperfine structure of87Sr+

The ground state hyperfine splitting of⁸⁷Sr⁺ was measured with a precision of 1×10^–8. The experiments were performed with an RF ion trap connected to an ISOL (isotope separator on-line), where all the possible transitions between Zeeman sublevels were observed by a laser-microwave double resonance method. The magnetic dipole hyperfine constant was determined to beA=–1 000 473.673 (11) kHz.     

Dicationic ((−)-sparteine)palladium-catalyzed enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene, proceeding via a palladium enolate

A dicationic ((−)-sparteine)palladium complex underwent a superior catalytic enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene performing satisfactorily, starting with ((−)-sparteine)PdCl₂ and AgSbF₆ as catalyst precursors (1 mol % loading) in the presence of 3 Å molecular sieves over the reaction.     

Laser spectroscopy of trapped 7Be and 10Be at a prototype slow RI-beam facility of RIKEN

A next-generation slow radioactive nuclear ion beam facility (SLOWRI) which provides slow, high-purity and small emittance ion beams of all elements is being build as one of the principal facilities at the RIKEN RI-beam factory (RIBF). High energy radioactive ion beams from the projectile fragment separator BigRIPS are thermalized in a large gas catcher cell. The thermalized ions in the gas cell are guided and extracted to a vacuum environment by a combination of dc electric fields and inhomogeneous rf fields (rf carpet ion guide). From there the slow ion beam is delivered via a mass separator and a switchyard to various devices: such as an ion trap, a collinear fast beam apparatus, and a multi-reflection time of flight mass spectrometer. In the R&D works at the present RIKEN facility, an overall efficiency of 5% for a 100A MeV ⁸Li ion beam from the present projectile fragment separator RIPS was achieved and the dependence of the efficiency on the ion beam intensity was investigated. Recently our first spectroscopy experiment at the prototype SLOWI was performed on Be isotopes. Energetic ions of ¹⁰Be and ⁷Be from the RIPS were trapped and laser cooled in a linear rf trap and the specific mass shifts of these isotopes were measured for the first time.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.