The relation between chemical structure of dicarboxylic dihydrazide compounds and nucleation effect in isotactic polypropylene

Journal of Thermal Analysis and Calorimetry - A series of dicarboxylic dihydrazide compounds (DCDH-R-n) were prepared and used as nucleating agents for isotactic polypropylene (iPP). To investigate...     

Different charging behaviors between electrons and holes in Si nanocrystals embedded in SiN_x matrix by the influence of near-interface oxide traps

Si-rich silicon nitride films are prepared by plasma-enhanced chemical vapor deposition method,followed by thermal annealing to form the Si nanocrystals(Si-NCs)embedded in Si Nx floating gate MOS structures.The capacitance–voltage(C–V),current–voltage(I–V),and admittance–voltage(G–V)measurements are used to investigate the charging characteristics.It is found that the maximum flat band voltage shift(△VFB)due to full charged holes(～6.2 V)is much larger than that due to full charged electrons(～1 V).The charging displacement current peaks of electrons and holes can be also observed by the I–V measurements,respectively.From the G–V measurements we find that the hole injection is influenced by the oxide hole traps which are located near the Si O2/Si-substrate interface.Combining the results of C–V and G–V measurements,we find that the hole charging of the Si-NCs occurs via a two-step tunneling mechanism.The evolution of G–V peak originated from oxide traps exhibits the process of hole injection into these defects and transferring to the Si-NCs.     

A Rapid Method for Qualitative and Quantitative Analysis of Major Constituents in Dengzhanxixin Injection by LC-DAD-ESI–MSn

For the first time a rapid method for qualitative and quantitative analysis of constituents in Dengzhanxixin injection was established by liquid chromatography with electrospray ionization–tandem mass spectrometry. Eighteen compounds including flavonoids and phenolic acids were characterized or tentatively identified. Ten of these compounds, including 5-O-caffeoylquinic acid, caffeic acid, 1,3-O-dicaffeoylquinic acid, 6′-O-caffeoylerigeroside, scutellarin, 3,4-O-dicaffeoylquinic acid, 3,5-O-dicaffeoylquinic acid, erigoster B, apigenin-7-O-glucuronide and 4,5-O-dicaffeoylquinic acid, were further quantified as marker substances by LC-DAD using a C₁₈ column at 0.4 mL min^?1 within 37 min. The quantitative method was validated for ten interesting compounds, including linearity, accuracy, precisions, LOQ and LOD, which was proved to be sensitive, reproducible and accurate. The study might provide a comprehensive method for the quality assessment of dengzhanxixin injection.     

Thermal stability of nucleation effect of different β-nucleating agents in isotactic polypropylene

Journal of Thermal Analysis and Calorimetry - The thermal stability of nucleation effect of three highly effective β-nucleating agents, namely an aryl diamide-based nucleating agent (TMB-5), a...     

α-蒎烯/β-蒎烯共聚物合成与表征

α-蒎烯/β-蒎烯共聚物合成与表征;松节油;α-蒎烯;萜烯树脂;阳离子聚合     

Effects of some nucleating agents on the supercooling of erythritol to be applied as phase change material

Nine nucleating agents, calcium pimelate (CaPi), bicyclic [1, 2, 2]heptane di-carboxylate (HPN-68), a commercially obtained aryl amide nucleating agent (TMB-5), calcium salt of hexahydrophthalic acid (HPN-20E), 1,3:2,4-di-p-methylbenzylidene sorbitol (MDBS) and sodium, potassium, magnesium and calcium salt of benzene-1, 3, 5-tricarboxylic acid (Na₃BTC, K₃BTC, Mg₃BTC₂ and Ca₃BTC₂, respectively), were applied to reduce the supercooling of erythritol, and their effects were investigated by cyclic differential scanning calorimetry (DSC). The results revealed that Na₃BTC and K₃BTC could not induce erythritol to crystallize under the experiment condition. MDBS could only make erythritol to crystallize at a temperature slightly higher than that of pure erythritol, and the effect was unstable. Mg₃BTC₂, Ca₃BTC₂ and HPN-68 could induce erythritol to crystallize at relatively high temperature, but the peak temperature of crystallizing (T _{p, cr}) and the phase change enthalpy of crystallizing (Δ_cr H) decreased greatly as the melting–crystallizing cycles increased. HPN-20E-doped erythritol crystallized at a high temperature with the T _{p, cr} of 69.3 °C at the first cycle, but the T _{p, cr} and Δ_cr H varied greatly during the melting–crystallizing cycles. CaPi and TMB-5 could induce erythritol to crystallize at a stable temperature with the T _{p, cr} of about 69 °C and 64 °C, respectively, and with a stable Δ_cr H of about 204 and 185 J g^?1, respectively, in all melting–crystallizing cycles. Hence, CaPi- and TMB-5-doped erythritol could be used as PCMs and applied in thermal energy storage in which the energy was absorbed at a high temperature and released at a lower but stable temperature.     

Effects of different metal salts of aliphatic dicarboxylic acids on the formation of β-crystalline form in isotactic polypropylene

The effects of barium, calcium and zinc salts of the aliphatic dicarboxylic acids on the nucleation ability and formation of β-crystalline form in isotactic polypropylene (iPP) were investigated. The results showed that barium, calcium and zinc salts of aliphatic dicarboxylic acid were related to the number of carbon atoms in the acids, and carbon atomic numbers of 5–8 had good nucleation ability for iPP except calcium adipate and zinc pimelate, in which barium glutarate, calcium suberate and zinc suberate were highly efficient β-nucleating agents for iPP. In addition, the optimal addition amounts of barium glutarate, calcium suberate and zinc suberate were 0.1 mass%, 0.1 mass% and 0.15 mass%, respectively, and the relative contents of β-crystals reached 0.9561, 0.9351 and 0.9447, respectively. The results of mechanical and thermal properties with the optimal addition amount showed that barium glutarate, calcium suberate and zinc suberate improved the toughness and thermal properties but decreased the rigidity of iPP.

     

Cuprous oxide nanoparticles dispersed on reduced graphene oxide as an efficient electrocatalyst for oxygen reduction reaction

Cuprous oxide (Cu(2)O) nanoparticles dispersed on reduced graphene oxide (RGO) were prepared by reducing copper acetate supported on graphite oxide using diethylene glycol as both solvent and reducing agent. The Cu(2)O/RGO composite exhibits excellent catalytic activity and remarkable tolerance to methanol and CO in the oxygen reduction reaction.     

A Rapid Method for the Analysis of Ten Compounds in Psoralea corylifolia L. by UPLC

The objective of this study was to develop a simple, efficient and reliable method for routine quantitative analysis for Psoralea corylifolia L. An ultra performance liquid chromatography with DAD detector system was employed for simultaneous quantification of ten compounds. The chromatographic analysis was performed by UPLC with C₁₈ column and gradient elution of 0.05% formic acid aqueous solution and acetonitrile in 16 min. All calibration curves were linear (R ² ≥ 0.9990) over the tested ranges. The LOD and LOQ were lower to 13.07 and 39.22 ng mL^?1 with 2 μL of injection volume, respectively. The intra- and inter-day precisions as determined from sample solutions were below 4.1 and 4.2%. The average recoveries were ranged from 94.2 to 108.8% with RSDs ≤ 4.6%. This validated method was applied for the analysis of ten analytes in P. corylifolia L. from different origins. The variation of the content of ten compounds was remarkable among the tested samples: psoralenoside increased from 7.42 to 17.04 mg g^?1, isopsoralenoside from 6.05 to 14.34 mg g^?1, psoralen from 2.37 to 3.90 mg g^?1, isopsoralen from 2.53 to 3.65 mg g^?1, neobavaisoflavone from 1.59 to 2.96 mg g^?1, bavachin from 1.02 to 2.35 mg g^?1, psoralidin from 0.45 to 1.91 mg g^?1, isobavachalcone from 1.33 to 4.71 mg g^?1, corylifol A from 1.02 to 2.40 mg g^?1 and bakuchiol from 28.10 to 63.89 mg g^?1.     

Local thermal conductivity of polycrystalline AlN ceramics measured by scanning thermal microscopy and complementary scanning electron microscopy techniques

The local thermal conductivity of polycrystalline aluminum nitride (AlN) ceramics is measured and imaged by using a scanning thermal microscope (SThM) and complementary scanning electron microscope (SEM) based techniques at room temperature.The quantitative thermal conductivity for the AlN sample is gained by using a SThM with a spatial resolution of sub-micrometer scale through using the 3ω method.A thermal conductivity of 308 W/m·K within grains corresponding to that of high-purity single crystal AlN is obtained.The slight differences in thermal conduction between the adjacent grains are found to result from crystallographic misorientations,as demonstrated in the electron backscattered diffraction.A much lower thermal conductivity at the grain boundary is due to impurities and defects enriched in these sites,as indicated by energy dispersive X-ray spectroscopy.