Synthesis, crystal structure and properties of K2Ta2S10: A novel ternary tantalum polysulfide with TaS8 polyhedra forming infinite anionic chains

The new ternary alkali tantalum polysulfide K₂Ta₂S₁₀ has been synthesized by reacting TaS₂ with an in situ formed melt of K₂S₃ and S at 773 K. The compound crystallizes with four formula units in the monoclinic space group P2₁/n (No. 14) with lattice parameters of . The structure contains two different zigzag chain anions [TaS₅]⁻, running parallel to the crystallographic b-axis separated by potassium cations. The two crystallographically independent tantalum atoms are in a distorted bi-capped trigonal prismatic environment of eight sulfur atoms which was never observed before. The TaS₈ polyhedra share three S atoms on each side to form the anionic chains. The compound was characterized with FIR and Raman spectroscopy.     

Heterostructured MoS2/GPC anode: the synergistic lithium storage performance and lithiation kinetics

Journal of Solid State Electrochemistry - Grapefruit peel carbon (GPC) is prepared from waste grapefruit peel and further used as substrate for in situ construction of MoS2 arrays, forming MoS2/GPC...     

Online high‐pH reversed‐phase liquid chromatography × low‐pH reversed‐phase liquid chromatography tandem electrospray ionization mass spectrometry combined with pulse elution gradient in the first dimension for the analysis of alkaloids in Macleaya cordata (willd.) R. Br

An online high‐pH reversed‐phase liquid chromatography× low‐pH reversed‐phase liquid chromatography tandem electrospray ionization mass spectrometry combined with pulse elution gradient in the first dimension was constructed to separate and identify alkaloids from Macleaya cordata (willd.) R. Br. The modulation was performed by using a dual second dimensional columns interface combined with a make‐up dilution pump, which is responsible for dilution and neutralization of the first dimensional effluent, and the dual second dimensional columns integrated the trapping and the separation function to reduce the second dimension system dead volume. Taking advantage of the dissociable characteristics of alkaloids, mobile phases with different pH values were applied in the first dimension (pH 9.0) and the second dimension (pH 2.6) to improve the orthogonality of two‐dimension separation. Besides, the pulse elution gradient in first dimension and second dimensional gradient were carefully optimized and much better separation was achieved compared to the separation with the traditional two‐dimensional liquid chromatography approach. Finally, mass measurement was performed for alkaloids in M. cordata (willd.) R. Br. by coupling proposed two‐dimensional liquid chromatography system with triple quadrupole mass spectrometry, and 39 alkaloids were successfully identified by comparing the obtained result with the former reported results.     

Mineral-derived Li4SiO4-based adsorbent for post-combustion CO2 capture: An experimental and kinetic investigation

Li₄SiO₄-based adsorbent is considered as a promising choice for the CO₂ removal from power plants’ flue gases. However, the relatively high raw materials cost still limits its industrial applications. In this work, aiming to reduce the cost of Si-source, three novel natural occurring minerals including the pumicestone, the montmorillonite and the attapulgite were employed as Si-sources for the production of Li₄SiO₄-based adsorbents. The phase composition, surface morphology as well as the cyclic CO₂ ad-desorption performance of obtained adsorbents were experimentally and kinetically investigated. It is found that the Si content of minerals directly determines the adsorption capacity of adsorbents, resulting in a relatively high and stable capacity of nearly 0.1 g/g within 22 cycles for the pumicestone derived adsorbent compared with other adsorbents obtained from minerals. Moreover, the excess Ca inside the minerals is found forming CaO, which is harmful to the desorption performance of adsorbent owing to the occurrence of Li–Ca–CO₂ interactions. As a consequence, Si-source with high Ca content was proven inadaptable for the synthesis of Li₄SiO₄-based adsorbent, which provides guidance for the future selection of mineral Si-sources in this field.     

Hydrothermal Synthesis and Crystal Structures of Na2Be3(SeO3)4·H2O and Cs2[Mg(H2O)6]3(SeO3)4

The selenites, Na₂Be₃(SeO₃)₄ · H₂O and Cs₂[Mg(H₂O)₆]₃(SeO₃)₄, were synthesized under hydrothermal conditions. The crystal structures of Na₂Be₃(SeO₃)₄ · H₂O and Cs₂[Mg(H₂O)₆]₃(SeO₃)₄ were determined by single‐crystal X‐ray diffractions. Na₂Be₃(SeO₃)₄ · H₂O crystallizes in the triclinic space group P1 (no. 2) with unit cell parameters a = 4.8493(9), b = 12.013(2), c = 12.077(2) Å, and Z = 2, whereas Cs₂[Mg(H₂O)₆]₃(SeO₃)₄ crystallizes in the monoclinic space group C2/m (no. 12) with lattice cell parameters a = 12.596(6), b = 7.297(4), c = 16.914(8) Å, and Z = 2. Na₂Be₃(SeO₃)₄ · H₂O features a three‐dimensional open framework structure formed by BeO₄ tetrahedra and SeO₃ trigonal pyramids. Na cations and H₂O molecules are located in different tunnels. Cs₂[Mg(H₂O)₆]₃(SeO₃)₄ has a structure composed of isolated [Mg(H₂O)₆] octahedra and SeO₃ trigonal pyramids interacted by hydrogen bonds, and Cs cations are resided in‐between. Both compounds were characterized by thermogravimetric analysis and FT‐IR spectroscopy.     

(1R,5S)-3-羟基二环[3.1.0]己基-6-基(苯基)甲酮的合成及其Norrish Ⅱ型光化学反应研究

以二环[3.1.0]己烷为骨架设计了合理的合成路线,成功合成了具有Norrish Ⅱ型光化学特点的光化学反应前体(1R,5S)-3-羟基-6-二.环[3.1.0]己基苯基甲酮(10),并通过1H NMR,13C NMR,DEPT135,H-H COSY,HMQC,HMBC,ROESY,6-H- 1D-NOE,9-H- ...     

Synthesis of Ni2P promoted trimetallic NiMoW/γ-Al2O3 catalysts for diesel oil hydrotreatment

The Ni2P promoted and γ-Al2O3 supported NiMoW sulfide catalyst consisting of 4 wt% Mo, 22 wt% W, 2 wt% Ni and 2.5 wt% Ni2P was synthesized by a co-impregnation method. The catalysts were characterized by N2 adsorption-desorption, X-ray diffraction (XRD), diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, NH3 temperature-programmed desorption (NH3-TPD) and transmission electron microscopy (TEM). The results showed that Ni2P, Ni, Mo and W species were highly dispersed over γ-Al2O3. The hydrodesulfurization (HDS) of dibenzothiophene (DBT) showed that the presence of Ni2P brought a strong promotional effect on the HDS activity, which was further confirmed by the HDS and hydrodenitrogenation (HDN) of diesel oil under industrial conditions. The enhancement in HDN activity and stability by Ni2P addition could be attributed more to the effect of new active sites of Ni2P than that of acidity modification. The as-prepared Ni2P-NiMoW/γ-Al2O3 catalyst showed better hydrotreating performance than NiMoW/γ-Al2O3 and commercial catalysts.     

Photoluminescence investigation based on laser heating effect in ZnO-ordered nanostructures

We synthesized ZnO-SiO2 composite opal and ZnO inverse opal by electrodeposition using SiO2-opal template and polystyrene (PS)-opal template, respectively. Compared with compact ZnO nanocrystal film also prepared by electrodeposition, ordered ZnO nanostructures exhibit more significant red-shift and broadening of the UV peak with increasing excitation power, which is due to a stronger local heating effect in ordered ZnO nanostructures. We developed a quantitative analytical method to investigate photoluminescence (PL) of ZnO based on laser heating effects. The experimental data agree well with fitting curves derived from the electron-phonon interaction model. Important parameters, such as electron-phonon coupling strength and thermal activation energy, can be obtained by fitting experimental data. The resonant Raman spectra provide further evidence that the analyses based on laser heating effects are feasible.     

High-performance Flexible Symmetric Supercapacitor Based on Heterostructured PANI@MoS2 Nanocomposite Electrode

Three-dimensional (3D) heterostructured molybdenum disulfide (MoS₂) is used as base materials for aniline monomer in situ polymerization on its surface. It is found that the aniline addition has a remarkable effect on the energy storage of the final compounds due to the improvement of the conductivity and structure stability combined with the synergistic effect between the two types of species. The optimal compound of PANI@MoS₂-150 not only shows a high capacitance value of 801.4 F ⋅ g⁻¹ at a current density of 0.5 A ⋅ g⁻¹ but also provides a high retention rate of 77.4 % after 10,000 cycles. The capacitance fading may be due to the increase of the internal resistance analyzed by EIS. Furthermore, a flexible symmetric supercapacitor based on PANI@MoS₂-150 has also been fabricated and the specific capacitance reaches 105 F ⋅ g⁻¹ at a current density of 1 A ⋅ g⁻¹. Impressively, the capacitance retention is larger than 100 % undergoing 10,000 cycles. Besides, the highest energy density of 21 Wh ⋅ kg⁻¹ was obtained. Additionally, the fabricated symmetric supercapacitor demonstrates excellent flexibility.     

Different experimental results for the influence of immersion angle on the resonant frequency of a quartz crystal microbalance in a liquid phase: with a comment

This paper presents different experimental results of the influence of an immersion angle (θ, the angle between the surface of a quartz crystal resonator and the horizon) on the resonant frequency of a quartz crystal microbalance (QCM) sensor exposed one side of its sensing surfaces to liquid. The experimental results show that the immersion angle is an added factor that may influence the frequency of the QCM sensor. This type of influence is caused by variation of the reflection conditions of the longitudinal wave between the QCM sensor and the walls of the detection cell. The frequency shifts, measured by varying θ, are related to the QCM sensor used. When a QCM sensor with a weak longitudinal wave is used, its resonant frequency is nearly independent of θ. But, if a QCM sensor with a strong longitudinal wave is employed, the immersion angle is a potential error source for the measurements performed on the QCM sensor. When the reflection conditions of the longitudinal wave are reduced, the influence of θ on the resonant frequency of the QCM sensor is negligible. The slope of the plot of frequency shifts (ΔF) versus (ρη)^1/2, the square root of the product of solution density (ρ) and viscosity (η), may be influenced by θ in a single experiment for the QCM sensor with a strong longitudinal wave in low viscous liquids, which can however, be effectively weakened by using the averaged values of reduplicated experiments. In solutions with a large (ρη)^1/2 region (0-55 wt% sucrose solution as an example, with ρ value from 1.00 to 1.26 g cm⁻³ and η value from 0.01 to 0.22 g cm⁻¹ s⁻¹, respectively), the slope of the plot of ΔF versus (ρη)^1/2 is independent of θ even for the QCM sensor with a strong longitudinal wave in a single experiment. The influence of θ on the resonant frequency of the QCM sensor should be taken into consideration in its applications in liquid phase.