Confined space-controlled hydroperoxidation of trisubstituted alkenes adsorbed on pentasil zeolites

Photosensitized oxidation of trialkylalkenes 2-methyl-2-pentene (1), 1-methylcyclohexene (2), trans-3-methyl-2-pentene (3), cis-3-methyl-2-pentene (4), and 2-methyl-2-butene (5) included in the internal framework of Na-ZSM-5 zeolites was investigated. The zeolite samples having adsorbed the alkenes were suspended in isooctane, and the sensitizer, tetraphenylporphyrin (TPP), was dissolved in the solution. Singlet oxygen produced in the solution diffused into the internal framework of the zeolites and reacted with alkenes. For all the substrates studied, the ene-type allylic hydroperoxides were obtained in a highly regioselective manner. The regiochemistry for 1-4 in favor of the allylic hydrogen abstraction from the largest substituents is in contrast to their photooxidation within the dye-supported zeolite Na-Y, where the secondary hydroperoxides are preferentially produced. The tight confinement of the alkenes within the narrow channels of the ZSM-5 zeolites is likely to be responsible for this selectivity.     

Multiple-State Emissions from Neat,Single-Component Molecular Solids: Suppression of Kasha's Rule

Three rigid and structurally simple heterocyclic stilbene derivatives, (E)-3H,3′H-[1,1′-biisobenzofuranylidene]-3,3′-dione, (E)-3-(3-oxobenzo[c] thiophen-1(3H)-ylidene)isobenzofuran-1(3H)-one, and (E)-3H,3′H-[1,1′-bibenzo[c] thiophenylidene]-3,3′-dione, are found to fluoresce in their neat solid phases, from upper (S₂) and lowest (S₁) singlet excited states, even at room temperature in air. Photophysical studies, single-crystal structures, and theoretical calculations indicate that large energy gaps between S₂ and S₁ states (T₂ and T₁ states) as well as an abundance of intra and intermolecular hydrogen bonds suppress internal conversions of the upper excited states in the solids and make possible the fluorescence from S₂ excited states (phosphorescence from T₂ excited states). These results, including unprecedented fluorescence quantum yields (2.3–9.6 %) from the S₂ states in the neat solids, establish a unique molecular skeleton for achieving multi-colored emissions from upper excited states by “suppressing” Kasha's rule.     

Monochromophore-Based Phosphorescence and Fluorescence from Pure Organic Assemblies for Ratiometric Hypoxia Detection

Hypoxia is a parameter related to many diseases. Ratiometric hypoxia probes often rely on a combination of an O₂-insensitive fluorophore and an O₂-sensitive phosphor in a polymer matrix, which require high cost and multi-step synthesis of transition metal complexes. The two-chromophore hypoxia probes encounter unfavorable energy transfer processes and different stabilities of the chromophores. Reported herein is a pure organic ratiometric hypoxia nanoprobe, assembled by a monochromophore, naphthalimide ureidopyrimidinone (BrNpA-UPy), bridged by a bis-UPy-functionalized benzyl skeleton. The joint factors of quadruple hydrogen bonding, the rigid backbone of UPy, and bromine substitution of the naphthalimide derivative facilitate bright phosphorescence (Φ_P=7.7 %, τ_P=3.2 ms) and fluorescence of the resultant nanoparticles (SNPs) at room temperature, which enable accurate, ratiometric, sensitive oxygen detection (K_sv=189.6 kPa⁻¹) in aqueous solution as well as in living HeLa cells.     

频域反射法光纤延时精密测量

本文提出了一种应用于光纤延时系统中实现光纤延时精密测量的新方法,用以提高光纤延时测量的精度和准确性.该方法以1064 nm激光调制信号作为光源,通过测量回波信号的幅值和相位信息得到被测通道的频率响应,采用快速傅里叶逆变换得到被测目标的延时信息,实现光纤延时测量.本文通过理论分析和延时测量实验对频域反射法与传统的时域测量方法进行对比,使用频域反射法在调制频率范围10—200 MHz,采样频率间隔0.5 MHz的实验条件下,实现了3.3 ps延时测量分辨率,并证明了该方法具有比时域方法更高的测量精度,测量结果的准确性更好.     

Monofunctionalized pillar[5]arene-based stable [1]pseudorotaxane

A new monofunctionalized pillar[5]arene bearing imidazolium moiety that formed stable [1]pseudorotaxane even at high concentration (100 mmol/L) was reported. [1]Rotaxane was obtained effi ciently through thiol-ene reaction from [1]pseudorotaxane which further confi rmed the formation of [1]pseudorotaxane.     

Adsorption of hydrogen isotopes on micro- and mesoporous adsorbents with orderly structure

The equilibrium and dynamic adsorption data of H(2) and D(2) on different micro- and mesoporous adsorbents with orderly structure including 3A, 4A, 5A, Y, and 10X zeolites; carbon CMK-3; silica SBA-15; and so forth were collected. Critical effect of the nanodimension of adsorbents on the adsorption behavior of hydrogen and its isotopes is shown. The highest adsorption capacity was observed at pore size 0.7 nm, but equal or even larger isotope difference in the equilibrium adsorption was observed at larger pore sizes, whereas the largest isotope difference in the dynamic adsorption was observed at 0.5 nm. The adsorption rate of D(2) is larger than that of H(2) in microporous adsorbents, but the sequence could be switched over in mesoporous materials. Linear relationship was observed between the adsorption capacity for hydrogen and the specific surface area of adsorbents although the adsorbents are made of different material, which provides a convincing proof of the monolayer mechanism of hydrogen adsorption. The linear plot for microporous adsorbents has a larger slope than that for mesoporous adsorbents, which is attributed to the stronger adsorption potential in micropores.     

萘二酰亚胺[3]轮烷的设计合成及发光性能研究

设计合成了以乙氧基柱[5]芳烃为环状分子,萘二酰亚胺衍生物为线性分子的[3]轮烷（[3]R和[3]R'）.其分离产率分别达到45%和62%.利用核磁氢谱和碳谱、二维旋转Overhause波谱（ROESY）以及高分辨质谱等对[3]R和[3]R'的轮烷结构进行了详细表征,并系统研究了轮烷分子的紫外吸收和荧光光谱.由于两侧大体积的乙氧基柱[5]芳烃阻止了[3]轮烷在高浓度下芳香环的过密堆积,使得[3]R和[3]R'即使在固体状态下都可以发射明亮的红色荧光.推测该轮烷分子在发光材料、光电器件等方面有潜在应用,同时本研究也对高效固体发光分子的制备提供了新思路.     

BODIPY-based fluorometric sensor array for the highly sensitive identification of heavy-metal ions

A BODIPY(4,4-difluoro-4-bora-3a,4a-diaza-s-indacene)-based fluorometric sensor array has been developed for the highly sensitive detection of eight heavy-metal ions at micromolar concentration. The di-2-picolyamine (DPA) derivatives combine high affinities for a variety of heavy-metal ions with the capacity to perturb the fluorescence properties of BODIPY, making them perfectly suitable for the design of fluorometric sensor arrays for heavy-metal ions. 12 cross-reactive BODIPY fluorescent indicators provide facile identification of the heavy-metal ions using a standard chemometric approach (hierarchical clustering analysis); no misclassifications were found over 45 trials. Clear differentiation among heavy-metal ions as a function of concentration was also achieved, even down to 10⁻⁷ M. A semi-quantitative interpolation of the heavy-metal concentration is obtained by comparing the total Euclidean distance of the measurement with a set of known concentrations in the library.     

Aromatic Amides: A Smart Backbone toward Isolated Ultralong Bright Blue-Phosphorescence in Confined Polymeric Films

We describe an aromatic amide skeleton for manipulation of triplet excited states toward bright long-lived blue phosphorescence. Spectroscopic studies and theoretical calculations demonstrated that the aromatic amides can promote strong spin-orbit coupling between (π,π*) and the bridged (n,π*) states, and enable multiple channels to populate the emissive ³(π,π*), as well as facilitate robust hydrogen bonding with polyvinyl alcohol to suppress non-radiative relaxations. Isolated inherent deep-blue (0.155, 0.056) to sky-blue (0.175, 0.232) phosphorescence with high quantum yields (up to 34.7 %) in confined films are achieved. The blue afterglow of the films can last for several seconds and are showcased in information display, anti-counterfeiting, and white light afterglow. Owing to the high population of ³(π,π*) states, the smart aromatic amide skeleton provides an important molecular design prototype to manipulate triplet excited states for ultralong phosphorescence with various colors.