二苯并18－冠－6辅助钡离子在1，2－二氯乙烷／水微界面转移的伏安研究

应用液／液界面微电极对二苯并１８－冠－６（ＤＢ１８－Ｃ－６）辅助推动Ｂａ~（２＋）在１，２－二氯乙烷／水（ＤＣＥ／Ｗ）界面转移的电化学过程进行了详细探讨，证明该过程遵循ＴＩＣ机理，是受扩散控制的可逆过程。通过转移电流和反应物浓度之间的线性关系，测定了Ｂａ~（２＋）以及用其它方法难以测定的ＤＢ１８－Ｃ－６。     

Coating of Tetraethylorthosilicate (TEOS)/Vinyltriethoxysilane (VTES) Hybrid Solution on Polymer Films

Tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) hybrid materials were prepared and the hydrolysis and condensation reactions during processing were investigated by means of 29Si NMR solution spectroscopy. The variation of drying characteristics of the coating films was examined with respect to the tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) ratio, as well as drying temperature, by FT-IR spectroscopy. It is shown that the TO mode of Si–O–Si stretching absorption was enhanced with increasing tetraethylorthosilicate (TEOS) content and drying temperature. Also, the wettability of the coating films on polymer films was independent of the solution composition but enhanced by the precoating of poly(4-hydroxystrene) (PHS) as a wetting agent. The adhesion between the coating and the films was also enhanced when the vinyltriethoxysilane (VTES) content in the coating solution was increased.     

Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.     

Novel titanium complexes of a multidentate dicarbollide ligand. Synthesis and structural characterization of a constrained geometry complex

The multidentate dicarbollide ligand nido-7,8-(NMe2CH2)2-7,8-C2B9H11 has been prepared, structurally characterized, and employed in the preparation of the novel mono- and trimetallic titanium complexes [eta5:eta1-(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)2 and [eta5:eta1-[(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)]2-mu3-O-Ti(NMe2)2.     

Dicarbollylamine ligand as a tunable template for sigma,sigma- and pi,sigma-bonding modes: syntheses, structures, and theoretical studies of eta5:eta1-coordinated constrained-geometry group 13 metal complexes

A series of group 13 main group complexes with pi,sigma-type bonding interaction of the formula [{(eta (5)-RC 2B 9H 9)(CH 2)(eta (1)-NMe 2)}MMe] (M = Al, R = H 5, Me 6; Ga, R = H 7, Me 8; In, R = H 9, Me 10) was produced by the reaction of group 13 metal alkyls (MMe 3; M = Al, Ga, In) with the dicarbollylamine ligands, nido-8-R-7,8-C 2B 9H 10-7-(CH 2)NHMe 2 (R = H 1, Me 2). The reactions of 1 and 2 with AlMe 3 in toluene initially afforded tetra-coordinated aluminum complexes with sigma,sigma-type bonding interaction, [{(eta (1)-RC 2B 9H 10)(CH 2)(eta (1)-NMe 2)}AlMe 2] (R = H 3, Me 4), which readily underwent further methane elimination to yield the corresponding constrained geometry complexes (CGCs, 5 and 6) of aluminum with pi,sigma-bonding interaction. However, the reactions between 1 and 2 and MMe 3 (M = Ga, In) in toluene produced gallium and indium pi,sigma-CGCs of 7 and 10 directly, not proceeding through sigma,sigma-intermediates. The structures of group 13 metal CGCs were established by X-ray diffraction studies of 5, 6, and 8, which authenticated a characteristic eta (5):eta (1)-coordination mode of the dicarbollylamino ligand to the group 13 metals. A similar pi,sigma-bonding interaction was also established in ethylene-bridged dicarbollylethylamine series. Thus, aluminum pi,sigma-CGCs of dicarbollylethylamine, [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}AlMe] (R = H 17, Me 18), were prepared by the trans-metalation of the [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}Ti(NMe 2) 2] (R = H 15, Me 16) with AlMe 3. However, only sigma,sigma-bonded complexes of the formula [{(eta (1)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}AlMe 2] (R = H 13, Me 14) were isolated by the reaction between [ nido-7-8-R-7,8-C 2B 9H 10-(CH 2) 2HNBz 2] (R = H 11, Me 12) and AlMe 3. When methane-elimination reactions between metal alkyls and dicarbollylamines were carried out with either the gallium atom or monobenzyl aminoethyl tethered ligands, [ nido-7-H 2NBz(CH 2) 2-8-R-7,8-C 2B 9H 10] (R = H 21, Me 22), desired pi,sigma-CGCs, [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NBz 2)}GaMe] (R = H 19, Me 20) or [{(eta (5)-RC 2B 9H 9)(CH 2) 2(eta (1)-NHBz)}AlMe] (R = H 23, Me 24), were generated, respectively. DFT calculation on 5 provides evidence of existence of pi,sigma-bonding of dicarbollylamine ligand to the aluminum atom: pi-bonding interaction of a dicarbollyl unit becomes intensified in the presence of a weak sigma-bonding amine-tethered group. Furthermore, preference for the formation of pi,sigma-bonding was predicted by optimizing a reaction profile including sigma,sigma- and pi,sigma-structures as well as transition state structures for each methylene- and ethylene-spaced ligand system, 3-5 and 14- 18, to reveal that pi,sigma-bonding interaction is more favorable in the case of a methylene-tethered ligand system.     

Poly(2,5-benzoxazole)/carbon nanotube composites via in situ polymerization of 3-amino-4-hydroxybenzoic acid hydrochloride in a mild poly(phosphoric acid)

Poly(2,5-benzoxzole) (ABPBO)/carbon nanotube (CNT) composites were prepared via in situ polycondensation of “protonated” AB monomer, 3-amino-4-hydroxybenzoic acid hydrochloride, in a mildly acidic poly(phosphoric acid) medium. In situ generated hydrochloric acid during the dehydrochlorination process provided additional acidity to the reaction medium. The enhanced acidity was advantageous for both the purification and dispersion of CNTs. Specifically, it was evident for the purification of as-received single-walled carbon nanotube (SWCNT), which was contained a large portion of impurity (60-70 wt%). On the basis of the data obtained from elemental analysis (EA), thermogravimetric analysis (TGA), infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the resultant composites implicated that individual tube of multi-walled carbon nanotube (MWCNT) and bundles of SWCNT were homogeneously dispersed into the ABPBO matrix. After in situ polymerization in harsh temperature at 175 °C and subsequent work-up processes, CNTs were remained structurally intact in a mild reaction medium. Thus, the PPA medium is indeed viable for the preparation of composite.     

Novel fabrication route for carbon-free and dense CuInSe2 (CIS) thin films via a non-vacuum process for solar cell application

Carbon-free CuInSe₂ (CIS) thin film with a dense microstructure has been prepared using a novel non-vacuum based fabrication route. Cu_xS_y and In₂Se₃ binary nanoparticles, approximately 10 nm in size, were synthesized by a low temperature colloidal process. The precursor film was deposited using the coating ink formulated with the binary nanoparticles and pyridine, and then annealed in the rapid thermal annealing (RTA) chamber at 540 °C for 15 min under selenium (Se) atmosphere. Scanning electron micrographs, X-ray diffraction patterns and Raman spectra showed a phase pure carbon-free and dense CIS thin film was prepared in this method. A solar cell device fabricated using this CIS thin film showed the following photovoltaic characteristics: V_OC = 350 mV, J_SC = 24.72 mA cm⁻², FF = 38.73% and η = 3.36% under standard AM 1.5 condition.     

Preparation and Optical Properties of Silica-Poly(ethylene oxide) Hybrid Materials

Structural evolution and optical properties of the silica-poly(ethylene oxide) hybrid films prepared from -glycidoxypropyltrimethoxysilane (GPTS) and 1-methylimidazol (MI) are studied. Polymerization of the epoxy groups is achieved by using 1-methylimidazol as a thermal curing agent. In liquid state ¹H &¹³ C NMR spectroscopy, it is found that silica condensation mainly occurs without epoxy ring opening. The epoxide polymerization is confirmed by using FT-IR, solid state CP-MAS ¹³C-NMR, and differential scanning calorimetry (DSC). The hybrid material is densified due to the epoxide polymerization as well as silica condensation with thermal curing. As a result, the thermal curing increases refractive index and extinction coefficient and shifts UV optical absorption edge to longer wavelength.     

Modulation of protective immunity against herpes simplex virus via mucosal genetic co-transfer of DNA vaccine with ��2-adrenergic agonist

Cholera toxin, which has been frequently used as mucosal adjuvant, leads to an irreversible activation of adenylyl cyclase, thereby accumulating cAMP in target cells. Here, it was assumed that β₂-adrenergic agonist salbutamol may have modulatory functions of immunity induced by DNA vaccine, since β₂-adrenergic agonists induce a temporary cAMP accumulation. To test this assumption, the present study evaluated the modulatory functions of salbutamol co-administered with DNA vaccine expressing gB of herpes simplex virus (HSV) via intranasal (i.n.) route. We found that the i.n. co-administration of salbutamol enhanced gB-specific IgG and IgA responses in both systemic and mucosal tissues, but optimal dosages of co-administered salbutamol were required to induce maximal immune responses. Moreover, the mucosal co-delivery of salbutamol with HSV DNA vaccine induced T_h2-biased immunity against HSV antigen, as evidenced by IgG isotypes and T_h1/T_h2-type cytokine production. The enhanced immune responses caused by co-administration of salbutamol provided effective and rapid responses to HSV mucosal challenge, thereby conferring prolonged survival and reduced inflammation against viral infection. Therefore, these results suggest that salbutamol may be an attractive adjuvant for mucosal genetic transfer of DNA vaccine.     

Multifunctional poly(2,5‐benzimidazole)/carbon nanotube composite films

The AB‐monomer, 3,4‐diaminobenzoic acid dihydrochloride, was recrystallized from an aqueous hydrochloric acid solution and used to synthesize high‐molecular‐weight poly(2,5‐benzimidazole) (ABPBI). ABPBI/carbon nanotube (CNT) composites were prepared via in situ polymerization of the AB‐monomer in the presence of single‐walled carbon nanotube (SWCNT) or multiwalled carbon nanotube (MWCNT) in a mildly acidic polyphosphoric acid. The ABPBI/SWCNT and ABPBI/MWCNT composites displayed good solubility in methanesulfonic acid and thus, uniform films could be cast. The morphology of these composite films was studied by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The results showed that both types of CNTs were uniformly dispersed into the ABPBI matrix. Tensile properties of the composite films were significantly improved when compared with ABPBI, and their toughness (～200 MPa) was close to the nature's toughest spider silk (～215 MPa). The electrical conductivities of ABPBI/SWCNT and ABPBI/MWCNT composite films were 9.10 × 10^?5 and 2.53 × 10^?1 S/cm, respectively, whereas that of ABPBI film was 4.81 × 10^?6 S/cm. These values are ～19 and 52,700 times enhanced by the presence of SWCNT and MWCNT, respectively. Finally, without acid impregnation, the ABPBI film was nonconducting while the SWCNT‐ and MWCNT‐based composites were proton conducting with maximum conductivities of 0.018 and 0.017 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1067–1078, 2010