Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Chemical release control: Schiff bases of vinylbenzaldehyde and functional amines

Schiff base (SB) monomers of vinylbenzaldehyde with functional amines were prepared. Copolymers of SB monomers with N-vinyl-2-pyrrolidone soluble in aqueous solutions were obtained in most cases. However, p-aminobenzenesulfonamide monomer resulted in gel formation. Thus, the reaction of vinylbenzaldehyde copolymer with the sulfonamide was used instead of the copolymerization. The hydrolytic behaviors of SB monomers and copolymers to liberate respective amines were structure dependent and, for most copolymers, the rates were lower than those of the corresponding monomers.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Main-chain scissions of poly(methyl methacrylate) induced by chlorinated nitrosobenzenes as radical generators

The spin trap agent, 2,6-di-chloronitrosobenzene (DCNB), which is decomposed into a nitrogen monoxide and a chlorinated phenyl radical on slight warming, was known to act as a radical generator through hydrogen abstraction by the chlorinated phenyl radical from an adjacent molecule. An ESR spectrum was observed at room temperature from a poly(methyl methacrylate) (PMMA)-benzene solution after the addition of DCNB followed by a warming to ca 30°C. The radical concentration increased with time. The spectrum was assigned to the spin adducts of PMMA radicals generated and trapped by DCNB. Analyses of the spectra observed from normal PMMA and partially deuterated PMMA's indicated that the majority of the PMMA radicals were the chain-scission species

and a minority were

. It was concluded that the main-chain scissions in PMMA were caused by the radicals (D), which had been primarily produced by the chlorinated phenyl radicals. These ESR data are supported by the fact that a decrease in molecular weight of PMMA was observed after addition of DCNB, and further reinforced by the fact that a molecular weight estimated from the number of the scission radicals agreed fairly well with the measured molecular weight. Similar results were obtained when both tri-chlorinated nitrosobenzene and tetra-chlorinated nitrosobenzene were used instead of DCNB.     

Product analyses and crosslink mechanism of plasma-polymerized methyl methacrylate

Plasma-polymerized methyl methacrylate (PPMMA) film was produced by a radio-frequency glow discharge of methyl methacrylate (MMA) gas with argon. PPMMA deposited under a plasma of mild energy was separated into a soluble fraction (sol-PPMMA) and an insoluble matrix (insol-PPMMA), which is highly crosslinked, by solvent-extraction and filtration. The chemical structure of the sol-PPMMA was determined by pyrolysis/gas chromatography, IR spectroscopy, ¹H-NMR, ¹³C-NMR, and elemental analysis techniques. On the other hand, the structure of the insol-PPMMA was examined with IR spectroscopy, ¹³C-NMR with CP/MAS method, and elemental analysis. The crosslinking mechanism in the plasma polymerization of MMA is discussed on the basis of product analyses of the sol-PPMMA and the insol-PPMMA.     

ESR study of the photo-induced decomposition of polypropylene in the presence of N,N,N′,N′-tetramethyl-p-phenylenediamine

The mechanism of uv (λ > 325 nm) photodegradation of polypropylene (PP) containing N,N,N′,N′-tetramethyl-p-phenylenediamine (T₄MPD) has been investigated by means of ESR spectroscopy. The observed spectra after uv irradiation of both isotactic-PP (IPP) and stereoblock-PP (SPP) samples in vacuum at 77 K consisted principally of a broad singlet which was assigned to a T₄MPD cation radical (T₄MPD^+·). On the other hand, the spectrum observed after irradiation of an atactic polypropylene (APP) sample at 77 K in vacuum was resolved into several components which decayed almost up to ca. 263 K to give rise to the broad singlet of T₄MPD^+·. One component was a sharp quartet which was assigned to a methyl radical, ·CH₃·. The other component, a singlet, was attributed to a trapped electron, e_t^?.By comparison of the ESR spectrum of deuterated T₄MPD with that of the normal compound it was found that 60 ～ 70% of the methyl radicals arose from the added T₄MPD due to β-scission, which also formed the N,N,N′-trimethyl-p-phenylenediamine radical, T₃MPD·. The T₃MPD· radical presumably captures an electron at lower temperatures to become a carbanion, T₃MPD^?, which releases the electron to reproduce the T₃MPD· radical at elevated temperatures. This production of the radical T₃MPD· due to the liberation of an electron provides an explanation for the observed increase in intensity of the decay curve in the temperature range from ? 168 K to 185 K. The remaining fraction, 30 ～ 40%, of the total methyl radicals was produced from the PP matrix by an energy transfer from the excited T₄MPD¹ to the PP matrix. The broad singlet which appeared in the temperature range near 195 K was attributed to an acyl radical ～CH₂CH(CH₃)CH₂?O from the observed g-value. By photoillumination of this sample this broad singlet was converted reversibly into the quartet which was assigned to the radical ～CH₂CH(CH₂·)CH₂CHO.     

2-methyl tetrahydrofuran radicals formed by γ-radiolysis in the liquid phase

Identification of the radical species formed by γ-radiolysis of MTHF in the liquid phase was made by analysis of the ESR spectra observed from the spin-adducts of the radicals. A new secondary MTHF radical was found in addition to the tertiary radical.     

A hybrid density-functional study of the one-dimensional ferromagnetic ordering of (BDTA)[Ni(mnt)2]

The one-dimensional intermolecular ferromagnetic interaction of a charge-transfer (CT) complex, (BDTA)[Ni(mnt)₂] (BDTA: 1,3,2-benzodithiazolyl, mnt: maleonitriledithiolate), is studied by the Kohn–Sham hybrid density functional method, in order to understand the mechanism of the magnetism. All possible effective exchange integrals, J, between the spin pairs of the system indicate that a ferromagnetic interaction (J = 172 cm⁻¹) exists along the b-axis. Magnetic susceptibility, simulated with the ab initio determined J values by the quantum Monte Carlo (QMC) method, is qualitatively consistent with that measured experimentally.     

Small angle X-ray scattering from lamellar phase for β-3,7-dimethyloctylglucoside/water system: comparison with β-n-alkylglucosides

Small angle X-ray scattering (SAXS) is measured for the lamellar phase in aqueous systems of 1-o-β-3,7-dimethyoctyl-D-glucopyranoside (β-Glc(Ger)), which has recently been prepared by us, 1-o-β-decyl-D-glucopyranoside (β-GlcC₁₀), and 1-o-β-octyl-D-glucopyranoside (β-GlcC₈). The repeat distance d obtained from the position of the diffraction peak does not follow the swelling law d = 2δ_hc/_hc, where δ_hc and _hc are the thickness and the volume fraction of the hydrophobic layer, respectively. This may result from the fact that δ_hc increases and, equivalently, the surface area per surfactant molecule (a_s) decreases with increasing concentration. So we calculate δ_hc and a_s from the observed d value at each concentration using the above swelling law. The half-thickness δ_hc increases in the order β-GlcC₈ < β-Glc(Ger) < β-GlcC₁₀ at a fixed concentration. On the other hand, the data on a_s for β-GlcC₁₀ and β-GlcC₈ lie on the same line and the data for β-Glc(Ger) lies above this line. These results suggest that the cross-sectional area of the geranyl chain is larger than that of the glucose headgroup. Existence of water filled defects in bilayer sheets is also discussed based on the SAXS pattern and the concentration dependence of d.