Characterization of Ultrathin Films of Cellulose Esters

The adsorption of cellulose acetate (CA), cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from solutions prepared in acetone onto silicon wafers led to ultrathin films, which were characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The polysaccharides films were characterized in the air just after their formation and after annealing at temperatures higher than their glass transition temperature or melt temperature. The films thickness close to 2 nm and surface roughness did not vary significantly upon annealing. AFM images revealed the presence of small clumps dispersed on a homogeneous layer, which covered completely the Si wafers. Such topographic details were also observed after annealing. However, upon annealing the films surfaces changed from hydrophilic to hydrophobic, evidencing molecular re-orientation at the solid–air interface. The adhesion of bovine serum albumin (BSA) and lipase onto the cellulose esters films was quantified in order to evaluate the possibility of applying such films as selective support for biomolecules.     

Alkyl chain branching in ethylene–vinyl acetate copolymer

Ethylene–vinyl acetate copolymers contain two kinds of side chains: acetoxy branches originating from incorporated vinyl acetate and alkyl branches. The alkyl branching was determined by infrared analysis after converting the ethylene–vinyl acetate copolymer to a hydrocarbon polymer by three steps: hydrolysis, iodation with hydriodic acid containing red phosphorus, and reductive hydrogenation with lithium aluminum hydride. It was found that physical properties such as stiffness were dependent both on the degree of alkyl chain branching and on vinyl acetate content.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Liquid-Crystalline copolymers and polymer blends containing electron donor and acceptor groups: Effects of mesogenic structures on the smectic phase and the miscibility

Side-chain liquid-crystalline copolymers and polymer blends containing an electron-donating (carbazolylmethylene)aniline group and electron-accepting nitrophenyl groups with various central linking groups between aromatic groups in the mesogenic units, i.e., N?CH, CH?CH, N?N, and COO, were prepared to examine effects of the mesogenic structure on thermal behaviours. The most remarkable effects of the central linking group on the thermal properties and the miscibility were observed for the polymer blends. The 1:1 miscible polymer blends were prepared from the electron-donating polymer containing (carbazolylmethylene)aniline group (PM6C_z) and the electron-accepting polymers with similar central linking groups, i.e., N?CH, CH?CH, and N?N. For example, the 1: 1 polymer blend of PM6C_z and the electron-accepting polymer containing the nitrostilbene group induced a smectic phase from 73 to 207°C. This isotropic temperature was 46°C higher than the calculated value (161°C) based on the composition without the electron donor-acceptor interaction. On the other hand, the 1: 1 polymer blend of PM6C_z and the electron-accepting polymer containing the nitrophenylbenzoate group showed phase separation. Thus, the remarkable thermal stability and the miscibility of the polymer blends containing the electron donor and acceptor groups might be caused by planar structures between the mesogenic side groups which have similar central linking groups through the electron donor-acceptor interaction. A similar tendency was seen for copolymers and binary mixtures of both low-molecular-weight compounds containing the same mesogenic groups. © 1995 John Wiley & Sons, Inc.     

A hybrid density-functional study of the one-dimensional ferromagnetic ordering of (BDTA)[Ni(mnt)2]

The one-dimensional intermolecular ferromagnetic interaction of a charge-transfer (CT) complex, (BDTA)[Ni(mnt)₂] (BDTA: 1,3,2-benzodithiazolyl, mnt: maleonitriledithiolate), is studied by the Kohn–Sham hybrid density functional method, in order to understand the mechanism of the magnetism. All possible effective exchange integrals, J, between the spin pairs of the system indicate that a ferromagnetic interaction (J = 172 cm⁻¹) exists along the b-axis. Magnetic susceptibility, simulated with the ab initio determined J values by the quantum Monte Carlo (QMC) method, is qualitatively consistent with that measured experimentally.     

Small angle X-ray scattering from lamellar phase for β-3,7-dimethyloctylglucoside/water system: comparison with β-n-alkylglucosides

Small angle X-ray scattering (SAXS) is measured for the lamellar phase in aqueous systems of 1-o-β-3,7-dimethyoctyl-D-glucopyranoside (β-Glc(Ger)), which has recently been prepared by us, 1-o-β-decyl-D-glucopyranoside (β-GlcC₁₀), and 1-o-β-octyl-D-glucopyranoside (β-GlcC₈). The repeat distance d obtained from the position of the diffraction peak does not follow the swelling law d = 2δ_hc/_hc, where δ_hc and _hc are the thickness and the volume fraction of the hydrophobic layer, respectively. This may result from the fact that δ_hc increases and, equivalently, the surface area per surfactant molecule (a_s) decreases with increasing concentration. So we calculate δ_hc and a_s from the observed d value at each concentration using the above swelling law. The half-thickness δ_hc increases in the order β-GlcC₈ < β-Glc(Ger) < β-GlcC₁₀ at a fixed concentration. On the other hand, the data on a_s for β-GlcC₁₀ and β-GlcC₈ lie on the same line and the data for β-Glc(Ger) lies above this line. These results suggest that the cross-sectional area of the geranyl chain is larger than that of the glucose headgroup. Existence of water filled defects in bilayer sheets is also discussed based on the SAXS pattern and the concentration dependence of d.     

Protein identification by peptide mass fingerprinting and peptide sequence tagging with alternating scans of nano-liquid chromatography/infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry

We have developed a method for protein identification with peptide mass fingerprinting and sequence tagging using nano liquid chromatography (LC)/Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). To achieve greater sensitivity, a nanoelectrospray (nano-ES) needle packed with reversed-phase medium was used and connected to the nano-ES ion source of the FTICR mass spectrometer. To obtain peptide sequence tag information, infrared multiphoton dissociation (IRMPD) was carried out in nano-LC/FTICR-MS analysis. The analysis involves alternating nano-ES/FTICR-MS and nano-ES/IRMPD-FTICR-MS scans during a single LC run, which provides sets of parent and fragment ion masses of the proteolytic digest. The utility of this alternating-scan nano-LC/IRMPD-FTICR-MS approach was evaluated by using bovine serum albumin as a standard protein. We applied this approach to the protein identification of rat liver diacetyl-reducing enzyme. It was demonstrated that this enzyme was correctly identified as 3-alpha-hydroxysteroid dehydrogenase by the alternating-scan nano-LC/IRMPD-FTICR-MS approach with accurate peptide mass fingerprinting and peptide sequence tagging.