Large-volume injection electrothermal AAS combined with tungsten-treated pyrolytic graphite furnace: determination of cadmium in tap, snow and river water samples with phosphate modifier.

A large-volume (100 microl) injection-ETAAS with W-treated PG furnace combined with a phosphate modifier was applied to the determination of unpolluted levels of Cd in tap, snow and river-water samples. The limit of detection of 1.1 ng l(-1) was observed for a 4 w/v% NH4H2PO4 modifer. Matrix interference studies were tested for major ion species well found in fresh water. The direct determination of Cd in certified river water (12 +/- 2 ng l(-1)) was carried out and the observed value was in agreement with the certified one. The good recoveries of Cd added to real environmental water samples were also observed. This method was applied to the determination of Cd in unpolluted environmental water samples.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

PHOTOREACTIVATION ASSOCIATED WITH CHROMOSOMAL ABNORMALITY IN SEA URCHIN EGGS FERTILIZED WITH ULTRAVIOLET-IRRADIATED SPERM

Abstract— As a model for studies involving biologic systems, rates of hematoporphyrin and protopor-phyrin-sensitized photooxidation of tryptophan were measured in water-methanol mixtures. Absorption and fluorescence-emission spectra associated with solutions of porphyrins in different water-methano! mixtures were also examined. The optimal rate of photooxidation by hematoporphyrin occurred in 30% methanol; by protoporphyrin, in 60% methanol. Absorption spectra were examined to characterize dispersion of hematoporphyrin into monomeric form in 90% methanol, and the dimer formation which predominates in 30% methanol. With the more hydrophobic protoporphyrin, an absorption spectrum characteristic of drug monomer was seen in 100% methanol, a dimer spectrum was observed in 60% methanol. At methanol concentrations < 60%, we observed impaired photooxidation and another alteration in the absorption pattern apparently reflecting drug aggregation beyond the dimer stage. Fluorescence emission maxima of both porphyrins were blue-shifted with increasing solvent dielectric constant, but an additional blue shift was detected in an aqueous environment which was apparently related to porphyrin aggregation. Absorption and fluorescence-emission spectra appear helpful for characterizing environmental determinants of porphyrin-sensitized photooxidation.     

Spectrofluorimetric assay for acyl CoA-cholesterol acyltransferase

A sensitive assay for acyl CoA-cholesterol acyltransferase (EC 2.3.1.26) in rat liver microsomal and mitochondrial preparations is described. The lowered cholesterol concentration in the enzyme reaction with oleoyl CoA is determined spectrofluorimetrically by using the cholesterol oxidase/peroxidase/p-hydroxyphenylpropionic acid system. The assay requires as little as 20 μg of protein in the enzyme preparation.     

1,2-bis(4-methoxyphenyl)ethylenediamine as a fluorogenic reagent for reducing carbohydrates

Eight 1,2-diarylethylenediamines in the meso- or DL-form produce fluorescence when heated with reducing carbohydrates in an alkaline medium. Of the diamines, meso-1,2-bis(4-methoxyphenyl)ethylenediamine is the most favourable reagent for reducing carbohydrates, including 2- deoxy sugars, amino sugars and sialic acids. The reagent permits the fluorimetric determination of reducing carbohydrates at concentrations as low as 0.2–0.9 nmol ml^?1.     

Ideal nonideality in adsorption of 2-aminoethanethiol and 2-mercaptoethane sulfonic acid to form electrostatically stabilized binary self-assembled monolayers on Au(111)

In formation of binary self-assembled monolayers (SAMs) composed of 2-aminoethanethiol (AET) and 2-mercaptoethane sulfonic acid (MES) by adsorption from an ethanol solution on Au(111), the adsorption shows nearly ideal nonideality in that the surface ratio of MES to AET in the SAM is unity and does not depend on the mixing ratio of MES to AET in the bathing ethanol solution used for preparing SAMs, chi(soln)MES, over the wide range of chi(soln)MES between 0.01 and 0.95. X-ray photoelectron spectroscopy confirms that at least 80% of AET molecules adsorbed are protonated in this range of chi(soln)MES, indicating that the electrostatic interaction between positively charged AET and negatively charged MES is responsible to the observed nonideality. Correspondingly, there appears only one cathodic peak in a linear-sweep voltammogram of the reductive desorption of the SAM, having a narrow full width at half-maximum of about 20 mV. This suggests the presence of strong lateral attractive interaction between the adsorbed thiolates.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Dianion of sulfinylacetone as a synthetic equivalent of beta-enolate of propionic acid: a novel synthesis of carboxylic acids from alkyl halides with three-carbon elongation

The reaction of the dianion of phenylsulfinylacetone with alkyl halides afforded beta-keto sulfoxides, which were first chlorinated with hexachloroethane and then treated successively with KH and t-BuLi to give carboxylic acids in three-steps in moderate overall yields from the alkyl halides. This procedure affords a good method for a synthesis of carboxylic acids from alkyl halides with three-carbon elongation.     

Systematic enantiomeric separation of [60]fullerene bisadducts possessing an inherent chiral addition pattern

The optical resolution of trans-2 and trans-3 [60]fullerene bisadducts with an inherent chiral addition pattern, modified by Bingel reaction, cycloaddition by benzyne, Prato reaction, and cycloaddition by o-quinodimethane, was systematically investigated by using chiral HPLC columns (Chiralcel OD and Chiralpak AD). The chiroptical properties of enantiomers separated were also examined.