Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

含铈类水滑石的制备及其衍生物催化研究

采用共沉淀水热法制备了镍铝铈三元复合层状氢氧化物.详细探讨了合成体系pH值、Ce/Al比及陈化条件对合成产物物相的影响;通过XRD,ICP,TG-DTA手段研究了合成物物相、组成及热行为.考察了以合成物为前驱体经焙烧后转化为镍铝铈复合金属氧化物在催化消除NO反应中的应用.实验结果表明,合成镍铝铈三元复合层状氢氧化物的适宜条件是:M2 /M3 =2,Ce/Al=0.07～0.75,pH=5.5～6.9,水热处理条件为110℃,5 h;在pH=5.5～6.9条件下,合成原料配比不同,产物物相相同,但组成不同;合成物热稳定性较差,在T=100～400℃之间,层间吸附水及层间平衡阴离子NO3-脱去,转化为复合氧化物,将此氧化物应用于NO消除反应中,表现出高的低温活性,400℃进行反应,NO转化率达95%,N2选择性几乎100%.     

Stereochemistry in cationic polymerization of alkenyl ethers. V. Stereochemistry of acetal additions as model reactions for the polymerization of alkenyl ethers

Acetal additions to β-substituted vinyl ethers having a variety of substituents (alkenyl ethers) were stereochemically investigated as model reactions for their cationic polymerization. The reactions catalyzed by BF₃O(C₂H₅)₂ in CH₂Cl₂ at O°C gave 1:1 adducts, the steric structure of which was determined by means of ¹³C-NMR spectroscopy. trans-Alkenyl ethers always gave adducts with a single structure stereospecifically, indicating that the intermediate carbocation attacks a trans-alkenyl ether from a definite direction independent of the bulkiness of substituents. On the other hand, cis-alkenyl ethers formed adducts with two steric structures, and the direction of cation addition was found to depend on the bulkiness of the alkoxy group involved. The above trends were in agreement with the results for poly(alkenyl ether)s and allowed detailed discussion of the stereochemistry of the propagation processes in alkenyl ether polymerizations.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Direct and stepwise intercalation of alkylalcohols intoα-zirconium phosphate

Intercalation of alkylalcohols into -zirconium phosphate was investigated at 25°C and/or under reflux.n-Alcohols having two to five carbons and 2-propanol were taken up at 25°C. These alcohols, andn-hexanol and heptanol, also intercalated under reflux.n-Alcohols having eight to eighteen carbon atoms intercalated when a stepwise method was employed. 2-Butanol and tertiary amylalcohols intercalated under reflux using a butanol intercalate as a starting material. Ethanol-to-butanol intercalates were unstable at room temperature, losing alcohols and changing to -zirconium phosphate. The particle size of the -zirconium phosphate did not affect the intercalation of alcohols.     

Optically active 2-p-tolylsulfinylacrylate a novel chiral dienophile which exhibits high reactivity and diastereoselectivity

The Diels-Alder reaction of a novel chiral dienophile, alkyl ($\text{S}$)-2-$\text{p}$-tolylsulfinylacrylates 1 with anthracene and cyclopentadiene showed high diastereoselectivity under the chelation controlled condition.     

Synthesis of fluoride garnets {Na3}[M3+2](Li3)F12 (M = Al,Cr, and Fe) from aqueous solution and their properties

The garnet-type fluorides, Na₃M₂Li₃F₁₂ (M = Al, Cr, and Fe) were synthesized as the coprecipitates of ～1 to 10 μm powders from HF solutions. The garnet structures were always obtained under acidic conditions. The incorporation of water molecules into the structure of the Cr and Fe garnets was observed. After heat treatment at 300°C, very small unknown peaks were observed in the X-ray powder pattern in addition to the garnet phase which had a slightly smaller value of the lattice constant than that of hydrous garnets. From the measurement of magnetic properties and Mössbauer effects, the Fe and Cr garnets were found to be paramagnetic with both ions in the trivalent state. Presentation of infrared spectra of the garnets is also included.     

Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

Spectrophotometric and thermal analytical studies on the dehydration of copper(II) sulfate and its double salts

Spectrophotometric (diffuse reflection) and TG-DTA data on the dehydration of CuSO₄ · 5H₂O, Na₂Cu(SO₄)₂ · 2H₂O, M₂Cu(SO₄)₂ · 6H₂O(M⁺ = K⁺, Rb⁺, Cs⁺ and NH⁺₄) and Co₂Cu(SO₄)₃ · 18H₂O are given. Although complete dehydration of CuSO₄ · 5H₂O brings about a striking color change from blue to white, it was found that there is only a slight decrease in the v?_max. of its d-d band in the course of this change, and the total light absorption in the visible-UV region increases at the same time. The dehydration of the alkali metal and ammonium double salts, most of which contain [Cu(OH₂)₆]²⁺ aquo ions (in contrast to the [Cu(OH₂)₄]²⁺ in CuSO₄ · 5H₂O), occurs generally more easily than that of CuSO₄ - 5H₂O, and their v?_max. increases slightly in the change, leading to blue or green anhydrous products, although the formation of a white modification was observed with the potassium salt. It was also found that the v?_max. of the Cu²⁺ ion in the dehydrated cobalt(II) double salt is still lower than that in anhydrous CuSO₄, i.e., the ligand field and/or tetragonality around it is decreased by the presence of Co²⁺ ions.     

Diastereoselective imino-aldol condensation of chiral 3-(p-Tolylsulfinyl)-2-furaldimine and ester enolates

(Ss)-3-(p-Tolylsufinyl)-2-furaldimine was synthesized, and condensation of the chiral furaldimine with lithium ester enolates has been examined. The product distribution of the reaction is dependent upon reaction conditions and on the kind of the substituent placed on the esters. Disubstituted ester enolate resulted in the exclusive formation of (4R)-beta-lactam, while unsubstituted, tert-butyl ester enolate preferentially gave (3R)-beta-amino ester. With the monosubstituted ester enolates, the condensation afforded (4R)-beta-lactams and/or (3R)-beta-amino esters as major products. This method has been applied to an efficient route to chiral furyl beta-lactams.