Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

Mutation detection in the drug-resistant hepatitis B virus polymerase gene using nanostructured reverse micelles.

The emergence of drug-resistant hepatitis B virus (HBV) has been reported in patients with prolonged administration of lamivudine, which is a potent drug for the prevention of HBV infection. Lamivudine-resistant HBV has several types of mutations at the YMDD motif of its DNA polymerase. We successfully demonstrated that monitoring the hybridization behavior in nanostructured reverse micelles enables us to detect single nucleotide polymorphisms (SNPs). With the aid of reverse micelles, a model 40-mer oligonucleotide containing a single-base substitution was clearly distinguished from the normal, complementary oligonucleotide. In addition, we extended this technique to a high-throughput analysis. The results obtained with a 96-well micro-plate reader indicated the possibility of SNPs detection toward multiple samples of patients.     

Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

‘Me2CuLi·TMSCl in CH2Cl2’. The most powerful methylating agent for sterically congested α,β-enoates

The reaction of Me₂CuLi with sterically congested α,β-unsaturated esters in the presence of TMSCl in CH₂Cl₂ proceeded very smoothly to produce the conjugate addition products in high yields.     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

Buchsbaum homogeneous algebras with minimal multiplicity

In this paper we first give a lower bound on multiplicities for Buchsbaum homogeneous k-algebras A in terms of the dimension d, the codimension c, the initial degree q, and the length of the local cohomology modules of A. Next, we introduce the notion of Buchsbaum k-algebras with minimal multiplicity of degree q, and give several characterizations for those rings. In particular, we will show that those algebras have linear free resolutions. Further, we will give many examples of those algebras.     

Argon sorption and partial molar volume in poly(ethyl methacrylate) above and below the glass transition temperature

Sorption and dilation isotherms for argon in poly(ethyl methacrylate) (PEMA) are reported for pressures up to 50 atm over the temperature range 5–85°C. At temperatures below the glass transition (T_g=61°C), sorption isotherms are well described by the dual-mode sorption model; and isotherms above T_g follow Henry's law. However, isotherms for dilation due to sorption are linear in pressure at all temperatures over the range investigated. Partial molar volumes of Ar in PEMA are obtained from these isotherms. The volumes are approximately constant above T_g (about 40 cm³/mol), whereas the volumes below T_g are smaller and dependent on both temperature and concentration (19–26 cm³/mol). By analyzing the experimental data according to the dual-mode sorption and dilation model, the volume occupied by a dissolved Ar molecule and the mean size of microvoid in the glass are estimated to be 67 129 ų, respectively. The cohesive energy density of the polymer is also estimated as 61 cal/cm³ from the temperature dependence of the dual-mode parameters.     

Dicationic ((−)-sparteine)palladium-catalyzed enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene, proceeding via a palladium enolate

A dicationic ((−)-sparteine)palladium complex underwent a superior catalytic enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene performing satisfactorily, starting with ((−)-sparteine)PdCl₂ and AgSbF₆ as catalyst precursors (1 mol % loading) in the presence of 3 Å molecular sieves over the reaction.