Facilitated sulfate transfer across the nitrobenzene-water interface as mediated by hydrogen-bonding ionophores.

Facilitated SO4(2-) transfers by hydrogen bond-forming ionophores are investigated across the nitrobenzene (NB)-water interface by using polarography with a dropping electrolyte electrode. Bis-thiourea 1, alpha,alpha'-bis(N'-p-nitrophenylthioureylene)-m-xylene, is found to significantly facilitate the transfer of the highly hydrophilic SO4(2-) whereas its counterpart, N-(p-nitrophenyl)-N'-propylthiourea (ionophore 2), cannot. In contrast to the predominant formation of a 1:1 complex with SO4(2-) in the bulk NB phase, the SO4(2-) transfer assisted by 1 is indeed based on the formation of a 1:2 complex between SO4(2-) and ionophore, even under the condition of [SO4(2-)]aq > [1]org. Such an exclusive formation of the 1:2 (SO4(2-) to ionophore) complex at the NB-water interface is not observed with structurally similar bis-thiourea 3, alpha,alpha'-bis(N'-phenylthioureylene)-m-xylene, where p-nitrophenyl moietes of bis-thiourea 1 are simply replaced by phenyl groups. The facilitated transfer of SO4(2-) with bis-thiourea 1 is further compared to that of HPO4(2-) and H2PO4- across the NB-water interface, which was previously shown to be assisted by 1 through the formation of the 1:1 and 2:1 (anion to ionophore) complexes, respectively. On the basis of these examinations, unique binding behaviors of hydrogen bond-forming ionophores at the NB-water interface are discussed, with a view towards development of ionophore-based anion-selective chemical sensors.     

Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

Determination in plasma of angiotensin-converting enzyme inhibitor by inhibitor-binding assay.

A method of determining a new angiotensin-converting enzyme inhibitor (CS-622) and its active metabolite (RS-5139) in plasma by inhibitor-binding assay has been developed using high-performance liquid chromatography. The assay is based on the principle that the amount of inhibitor bound to the enzyme is inversely related to the amount of hippuric acid liberated on hydrolysis from the artificial substrate (hippuryl-L-histidyl-L-leucine). Plasma was heated at 60 degrees C for 15 min, to inactivate endogenous enzyme, and preincubated with rabbit-lung angiotensin-converting enzyme at 37 degrees C for 3 min. The artificial substrate (5.75 mg/ml in pH 8.3 phosphate buffer containing sodium chloride) was added to the resulting solution, and the mixture was incubated for 30 min. The reaction was terminated by the addition of 2 M hydrochloric acid. The hippuric acid liberated on hydrolysis was extracted with ethyl acetate and determined by reversed-phase chromatography using methylparaben as an internal standard. The total concentration of the inhibitor and its metabolite were determined by this method after de-esterification by rat-plasma esterase. The standard curve was obtained by the regression analysis of log concentration against logit response. The within-day and day-to-day precision were satisfactory. The proposed method is simple, rapid and sensitive enough to determine angiotensin-converting enzyme inhibitor in plasma.     

Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

Synthesis and biological activities of analogs of a lipid A biosynthetic precursor: 1-O-phosphonooxyethyl-4'-O-phosphono-disaccharides with (R)-3-hydroxytetradecanoyl or tetradecanoyl groups at positions 2, 3, 2' and 3'.

Two novel analogs of a biosynthetic precursor of lipid A (2) were synthesized. The one analog (3) has acyl groups identical to those of 2, and the other (4) has tetradecanoyl groups in place of the (R)-3-hydroxytetradecanoyl groups of 2. Both 3 and 4 possess an alpha-glycosidically-bound phosphonooxyethyl group in place of the alpha-glycosyl phosphate group of 2. Compounds 3 and 4 exhibited definite antitumor activity against Meth A fibrosarcoma and low toxicity in rabbits, as the original compound 2 does. The replacement of the hydroxytetradecanoyl groups with tetradecanoyl groups barely affected the antitumor activity, but slightly enhanced the toxicity in rabbits.     

Molecular scale structure formation by folding

A conception of a structure formation suitable for nano-technology is proposed, which is programmable and suitable for mass production-like lithography. This conception utilizes the controlled folding of chains like the scan-lines of television. Its possibility and property were studied theoretically using the modeled chains consist of beads. By adopting the interaction among the beads which can distinguish the kind of the partner by its polarity and is chiral to break the chiral symmetry of the folded state, the special chains which have the unique ground states could be designed. In these ground states, the chains are folded like the scan-lines of television. The thermodynamic properties of the suggested chains were studied by the Monte Carlo simulations and the suggested chains showed the phase-transition-like behavior which is distinct compared to both the random chains and the chain that has only the non-specific attraction. The size dependence and the effects of adding the non-specific attraction and modifying the border of the folded conformation were also studied.     

Synthesis of novel organoselenium as catalyst for Baeyer-Villiger oxidation with 30% H2O2

A novel diselenide was synthesized in good yield via only four steps from phenol, and was employed as the catalyst for the Baeyer-Villiger oxidation with 30% H₂O₂ to obtain lactones in good yields.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Role of the nature of copper sites in the activity of copper-based catalysts for no conversion

The activities of the copper-based catalysts, Cu²⁺ /SiO²,Cu²⁺ /Vycor and Cu²⁺/ZSM-5, and V²O⁵/TiO² for NO conversion to N² in the presence or absence of NH³ and/or O² have been investigated. The Cu²⁺ /ZSM-5 catalyst exhibited the highest activity, even higher than that of V²O⁵/TiO². Photoluminescence studies of the dehydrated copper-based catalysts have suggested that the copper ions anchored onto ZSM-5 locate as isolated copper species near Brönsted sites in the zeolite channels while the copper ions anchored onto Vycor and SiO² locate mainly as copper dimer forms. These results suggest the role of copper ions which are stabilized with near-lying oxygen vacancies created by dehydroxylation of the zeolite, in NO conversion. As a result, it may be concluded that the isolated copper ions near Brönsted sites play a significant role in NO conversion but dimeric or polynuclear copper species are less effective for the reaction.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.