A Simple Chaotic Circuit with Impulsive Switch Depending on Time and State

This paper presents a simple chaotic circuit consisting of two capacitors, one linear two-port VCCS and one time-state-controlled impulsive switch. The impulsive switch causes rich chaotic and periodic behavior. The circuit dynamics can be simplified into a one-dimensional return map that is piecewise linear and piecewise monotone. Using the return map, we clarify parameter conditions for existence of chaotic and periodic attractors and coexistence state of attractors.     

Diversification of shotgun process

Three protocols for shotgun process are put forth in which simultaneous multi-fold reactions occur exclusively to each other. The first one involves simple combination of selective and non-selective reactions. Even if the simple protocol fails to give rise to the high selectivity, satisfactory outcome can be achieved by kinetic control or adjustment of functional groups.     

Dual Si-H effects in platinum-catalyzed silane reduction of carboxamides leading to a practical synthetic process of tertiary-amines involving self-encapsulation of the catalyst species into the insoluble silicone resin formed

Combination of commercially available platinum catalysts with siloxanes containing more than two Si-H groups is found to be an efficient catalyst system for the reduction of carboxamides to amines. In particular, facile removal of silicon and platinum residues from the product can be achieved by the use of polymethylhydrosiloxanes as reducing reagents.     

Optical waveguide fabrication and integration with a micro-mirror inside photosensitive glass by femtosecond laser direct writing

Photosensitive glass is a potentially important material for micro-fluidic devices that can be integrated with micro-optical components for biochemical analysis. Here, we demonstrate the fabrication of optical waveguides inside glass by femtosecond laser direct writing. The influence of the laser parameters on the waveguide properties is investigated, and it is revealed that the waveguide mode can be well controlled. The single mode is achieved at a low writing energy, while the multimode is achieved with increasing energy. In spite of a longitudinally elongated elliptical shape of the cross-sectional profile, the far-field pattern of the single-mode waveguide shows an almost symmetric profile. The measured propagation loss and the coupling loss are evaluated to be ∼0.6 dB/cm and ∼1.6 dB at a wavelength of 632.8 nm, respectively, under the conditions of 1.0–2.0 μJ pulse energy and 200–500 μm/s scan speed. The increased optical loss is associated with a higher waveguide mode at higher writing energy. Furthermore, the integration of waveguides and a micromirror made of a hollow microplate inside the glass is demonstrated to bend the laser beam at an angle of 90° in a small chip. The bending loss is estimated to be smaller than 0.3 dB. PACS 42.62.-b; 42.82.Cr; 82.50.Pt; 42.79.Gn; 42.81.Qb     

Effect of nitriding on grain oriented silicon steel bearing aluminum (the second study)

All kinds of high-permeability GO are manufactured using AlN as the main inhibitor. From a purely metallurgical viewpoint, three types of inhibitor preparation for high-permeability GO have been shown. They include a complete solution without nitriding, a complete precipitation with nitriding and a partial precipitation with nitriding. In this study, another possibility, i.e., a complete solution method with nitriding, was investigated to avoid the extra high-temperature slab reheating and to examine the effect of nitriding on GO bearing Al. This method can also provide the sharp Goss texture, and nitriding is shown to be very useful for changing the inhibitor intensity, depending on the primary grain size.     

Effects of natural polysaccharide addition on drug release from calcium-induced alginate gel beads

Calcium-induced alginate gel beads (Alg-Ca) containing various polysaccharides, including an alginate hydrolysate, were prepared and the drug release profiles were investigated. Hydrocortisone (HC) was gradually released from Alg-Ca into the mimic gastric fluid, while in intestinal fluid, it was quickly released with the dissolution of Alg-Ca. However, with Alg-Ca containing 5% chitin (CT), dissolution of Alg-Ca was not observed, and release of HC showed apparent zero-order kinetics. Furthermore, addition of the alginate hydrolysate altered the HC-release profile for Alg-Ca.     

One-step synthesis of 4-aminodihydrobenzofurans and 4-hydroxyindoles via dehydrogenation-heteromercuration of 2-alyl-3-aminocyclohexenones using mercury(II) acetate

On treatment of the 2-allyl-3-aminocyclohexenones with mercury(II) acetate, either sequence, dehydrogenation—oxymercuration or dehydrogenation—aminomercuration, occurred depending on the nature of the amino group in the substrate to yield the dihydrobenzofurans or indoles, respectively.     

Methanol synthesis from CO2-H2 and from CO-H2 under atmospheric pressure over Pd and Cu catalysts

Under atmospheric pressure, methanol was produced from CO₂–H₂ over Pd/ZnO and from CO–H₂ over Pd/MgO catalyst. Similar support effects were observed over Cu catalysts.     

Scale-up of high shear granulation based on the internal stress measurement

Scale-up of wet granulation in a vertical high shear mixer was conducted. Pharmaceutical excipient powders composed of lactose, cornstarch and micro-crystallinecellulose, and hydroxypropylcellulose as a binder were mixed together and then granulated with purified water under various operating conditions and vessel scales. A novel internal stress measurement system was developed and stress of normal and tangential directions that granules received from the agitator blade during the granulation was continuously measured. The results indicated that granules received stress mainly from the tangential direction, which also showed the largest value near at the vessel wall. The effects of the agitator tip speed and the centrifugal acceleration on the measured stress was investigated. It was found that the tip speed of the agitator blade could be the main factor for the granule growth. The physical properties such as strength, size distribution and compressibility of granules prepared by changing the operating conditions and the vessel scales were evaluated and the scale-up characteristics of high shear granulation were investigated experimentally. The results showed that these physical properties had linear correlations with the tip speed. It was finally concluded that the scale-up of high shear granulation could be well conducted by means of the tip speed of the agitator blade.     

Facile construction and divergent transformation of polycyclic isoxazoles: direct access to polyketide architectures

[reaction: see text] Base-promoted cyclocondensation of C-chloro oximes with cyclic 1,3-diketones affords functionalized isoxazoles in good yield and under convenient reaction conditions. This process enables the synthesis of highly substituted products with notable functional group tolerance. The products obtained are directly converted to a variety of polyketide-derived polycyclic structures including xanthenes, anthracenes, and benzophenones.