分解水制氢的KNO3—I2循环之研究：Ⅲ.代替电解反应的一个子循环

本文提出了一个硫酸中间盐子循环用以代替分解水制氢的KNO_3-I_2混合循环中的电解反应,从而使原混合循环变为一个纯热化学循环。     

Tailoring A Poly(ether sulfone) Bipolar Membrane: Osmotic-Energy Generator with High Power Density

Osmotic energy, obtained through different concentrations of salt solutions, is recognized as a form of a sustainable energy source. In the past years, membranes derived from asymmetric aromatic compounds have attracted attention because of their low cost and high performance in osmotic energy conversion. The membrane formation process, charging state, functional groups, membrane thickness, and the ion-exchange capacity of the membrane could affect the power generation performance. Among asymmetric membranes, a bipolar membrane could largely promote the ion transport. Here, two polymers with the same poly(ether sulfone) main chain but opposite charges were synthesized to prepare bipolar membranes by a nonsolvent-induced phase separation (NIPS) and spin-coating (SC) method. The maximum power density of the bipolar membrane reaches about 6.2 W m⁻² under a 50-fold salinity gradient, and this result can serve as a reference for the design of bipolar membranes for osmotic energy conversion systems.     

Color Point Tuning in Lu3−x−yMnxAl5−xSixO12:yCe3+ for White LEDs

A series of the solid‐solution phosphors Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ is synthesized by solid‐state reaction. The obtained phosphors possess the garnet structure and exhibit similar excitation properties as the phosphor Lu₃Al₅O₁₂:Ce³⁺, but with an effectively improved red component in the emission spectrum. This can be attributed to the energy transfer from Ce³⁺ to Mn²⁺. Our investigation reveals that electric dipole–quadrupole interactions dominate the energy‐transfer mechanism and that the critical distance determined by the spectral overlap method is about 9.21 Å. The color‐tunable emissions of the Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ phosphor as a function of Mn₃Al₂Si₃O₁₂ content are realized by continuously shifting the chromaticity coordinates from (0.354, 0.570) to (0.462, 0.494). They indicate that the obtained material may have potential application as a blue radiation‐converting phosphor for white LEDs with high‐quality white light.     

加强物理实验改革培养学生创新能力

本文阐述了物理实验在培养创新能力方面的重要作用,针对物理实验存在的问题提出了改革措施,从而达到培养学生创新能力的目的。     

光纤激光阵列目标在回路自适应光学系统的数值模拟

研究了光纤激光阵列目标在回路自适应光学系统在实际大气环境中的传输.从光纤激光阵列、激光在大气中的传输、目标和优化算法四个方面,建立了光纤激光阵列目标在回路自适应光学系统的理论模型.在不同强度大气湍流下,对系统补偿大气湍流影响的效果进行了研究,并对系统控制参数优化进行了简单探讨.结果表明,目标在回路闭环控制结构能够有效补...     

Waterborne crackle decorative coatings and crack patterns

A preparation method of waterborne crackle decorative coatings was reported in this paper and the factors that influence crack patterns were investigated. The crackle coating consisted of a waterborne basecoat and a waterborne topcoat. The basecoat was made from two-component epoxy emulsion and the topcoat was made from fluorine-containing acrylic emulsion, silicone-acrylic emulsion or styrene-acrylic emulsion. Three junction types of crack patterns were prepared by the three top coatings, which were T-junction, Y-junction and mixed junction. T-junction type with long and straight cracks was prepared from styrene-acrylic emulsion 296DS. Y-junction type with curve and short cracks was prepared from fluorine-containing acrylic emulsion A603C and mixed junctions type was made from silicone-acrylic emulsion. Crack patterns with different spacing were prepared by controlling the thickness of topcoat, dryness of basecoat or conditions of film forming. The characterize methods of type and spacing for crack pattern were developed and properties of coating film including adhesion, water resistance, scrub resistance and so on were tested. The results showed that the crackle coatings possessed satisfactory properties for practical application.     

可控空心光束在单轴晶体中的传输特性

基于光束在各向异性单轴介质中的傍轴矢量传输理论,对可控空心光束(CDHB)在单轴晶体中的传输特性作了研究.得出该光束在单轴晶体中传输的横向慢变振幅的表达式,并利用此表达式作数值计算,研究了CDHB在单轴晶体中的传输特性.研究表明,可控空心光束在单轴晶体中传输时,控制参数ξ和光束阶数N的取值对其光强分布有较大的影响.随着...