Determination of triazine pesticides and related compounds in environmental water by liquid chromatography-mass spectrometry.

A method for the determination of 5 triazine herbicides and 12 degradation products in environmental water samples using liquid chromatography-electrospray ionization mass spectrometry (LC/ESI/MS) has been developed. The pesticides in water were extracted with two types of solid phase: a styrene-divinylbenzene copolymer and a graphitized carbon black. Desorption solvents for the extracted compounds were acetone for the styrene-divinylbenzene copolymer and methanol for the graphitized carbon black. Overall recoveries from ground water and river water ranged from 73% to 111%. The limits of detection (LODs) were 0.2 to 28 ng l(-1). This method was applied to several ground water samples.     

PHOTORECEPTOR CELL TYPES IN THE RETINA OF VARIOUS VERTEBRATE SPECIES: IMMUNOCYTOCHEMISTRY WITH ANTIBODIES AGAINST RHODOPSIN AND IODOPSIN

Types of photoreceptor cells in the retinas of 36 species of vertebrates (5 classes, 14 orders) were investigated immunocytochemically with monoclonal antibodies against chicken iodopsin (Io-mAb) and antiserum against bovine rhodopsin (Rh-As). In mammals, Rh-As labeled the outer segments of some photoreceptor cells in striped squirrels (a diurnal mammal) and those of most photoreceptor cells in mice (a nocturnal mammal), while Io-mAb labeled any photoreceptor cells in either of them. In all species of birds studied, Io-mAb labeled the principal and accessory members of double cones and single cones with a red oil droplet. Rh-As labeled single cones with a yellow or clear oil droplet in addition to rods. In turtles, both Rh-As and Io-mAb labeled single cones with a red or clear oil droplet and the principal (with a yellow oil droplet) and accessory members of double cones. This suggests that the visual pigments in these cones of turtles have common epitopes with bovine rhodopsin and chicken iodopsin. In Japanese grass lizards, single cones with a yellow oil droplet and double cones were immunoreactive to both Rh-As and Io-mAb. In snakes, rods and cones could not be distinguished but both positively and negatively stained cells were observed by the use of each antibody. In geckos, however, all photoreceptor cells were immunonegative to Io-mAb. In all species studied in amphibians, Rh-As labeled rods but not cones. Neither rods nor cones reacted with Io-mAb. In fishes, almost all species studied had well developed cones, and some of these cones were labeled by Rh-As. However, Io-mAb labeled the outer segments of some cones only in loaches. Rh-As labeled photoreceptor cells in all species of fishes studied. Thus, Rh-As recognized the outer segments of rods in all species studied from fishes to mammals, whereas the epitope recognized by Io-mAb is conserved in some species of fishes, most species of reptiles and all species of birds studied.     

Bioavailability study of commercial sustained-release preparations of diclofenac sodium in gastrointestinal physiology regulated-dogs.

The gastrointestinal (GI) physiology of beagle dogs was regulated with a combined-treatment of intramuscular pentagastrin (10 micrograms/kg x 2) and intravenous atropine sulfate (0.02 mg/kg x 1). Here, the gastric acidity, the gastric emptying time and the small intestinal transit time in the regulated-dogs were respectively around pH 2, 0.7h and 4h, approximating those in healthy humans. The superiority of the regulated-dogs over the intact dogs was confirmed in comparative bioavailability studies by using two classes of commercial preparations. Both the conventional tablet and the sustained-release capsule of diclofenac sodium exhibited simple and similar average plasma concentration-time curves of free diclofenac in the intact dogs, while the latter preparation is reported to reveal a bimodal plasma curve of the drug in healthy humans. The regulated-dogs, however, permitted a bimodal average plasma pattern of the drug for the capsules due to an approximation of the GI physiology between humans and these classes of the dogs. The combined-treatment of beagle dogs with pentagastrin and atropine sulfate seems to supply a useful animal model in predicting the absorption characteristics of the sustained-release preparations and poor water-soluble drugs.     

Analysis of tetracycline antibiotics using HPLC with pulsed amperometric detection.

The analysis of tetracycline, oxytetracyline, chlortetracycline and doxycycline by high-performance liquid chromatography with pulsed amperometric detection using an anodized boron-doped diamond thin film (BDD) electrode is originally reported. The analyses were carried out using the mobile phase, phosphate buffer (0.01 M, pH 2.5)-acetonitrile (80:20; v/v), on a C18 column (250 x 4.6 mm i.d., 5 microm) at a flow rate of 1.0 mL/min. The optimal PAD waveform parameters at the anodized BDD were 1.5 V (versus Ag/AgCl) detection potential (E(det)) for 290 ms (200 ms delay time and 90 ms integration time), 2.0 V (versus Ag/AgCl) oxidation potential (E(oxd)) for 200 ms oxidation time (t(oxd)) and 0.4 V (versus Ag/AgCI) reduction potential (E(red)) for 200 ms reduction time (t(red)). The proposed method showed the simultaneous determination of tetracycline, oxytetracyline, chlortetracycline and doxycycline with a linear range of 0.1 - 100 microg/mL, detection limits of 0.05 - 0.1 microg/mL and recoveries of 70.8 - 96.0%. The application of this method to real samples was demonstrated and validated using a shrimp sample.     

Frequency measuring system using mirror gap stabilized Fabry-Perot interferometer

The mirror gap of a Fabry-Perot interferometer was stabilized with two laser diodes; one locked to the line frequency 385,243,555.14445 MHz of the F=3<--1 in 5D(3/2)<--5S(1/2) (87Rb) and the other to the 385,284,566.3663 MHz of the F=4<--2 in 5D(5/2)<--5S(1/2) (87Rb) [Opt. Commun. 102 (1993) 432]. The length of the mirror gap was adjusted to generate the zero-cross points simultaneously at both of the two line positions. The fringe signals obtained from an interferometer thus stabilized can be used as frequency markers having accuracies of the order of 10(10) depending on the finesse of the interferometer used. Based on measurement using Cs D1 hyperfine lines reported by Udem et al. [Phys. Rev. Lett. 82 (1999) 3568], the uncertainty of markers in the region 50 THz apart from the reference lines is +/- 5 MHz.     

Unexpected formation of benzaldehydes by the reactions of dithioacetals derived from cinnamaldehydes with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents

1,3-Dithianes 1 , 1,3-dithiolanes 2 , and diphenyl dithioacetals 3 derived from cinnamaldehydes reacted with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents to give benzaldehydes 4 . Hydride transfer from 1–3 to 2,3-dichloro-5,6-dicyano-p-benzoquinone followed by hydrolysis and oxidative carbon-carbon bond cleavage would produce benzaldehydes 4 .     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

The catalytic hydrogenolysis of 1-phenylbicyclo[4.1.0]heptane and the corresponding azidirine and epoxide

The hydrogenolysisof 1-phenylbicyclo[4.1.0]heptane (1a), cis-1-phenyl-2-methylbicyclo[4.1.0]heptane (1b), 1-phenyl-7-azabicyclo[4.1.0]heptane (2) and 1-phenyl-7-oxabicyclo[4.1.0]heptane (3) was studied using Ni, Pd, Rh and Pt as catalysts. The hydrogenolysis of the C₁C₇ bond of 1a and 1b led to the selective formation of trans-1-phenyl-2-methylcyclohexane (4a) with retention of configuration. Compound 1a gave not only 4a but also phenylcycloheptane (6a), which is the product of C₁C₆ bond fission, and the ratio of 6a to 4a increased in the sequence: Ni ? Pd, Rh < Pt. No C₁C₆ bond fission was observed in the hydrogenolysis of 1b. These results can be explained by a mechanism involving the formation of the π-benzyl complex.trans-2-Phenylcyclohexylamine (8) was obtained stereoselectively in the hydrogenolysis of 2 over Raney Ni. This selective formation can be ascribed to the competition of “SN i” and “radical” processes. The Pd catalysed hydrogenolysis gave cis-2-phenylcyclohexylamine (9) as the main product, while the presence of sodium hydroxide promoted the formation of 8.Raney Ni catalysed hydrogenolysis of 3 yielded a mixture of phenylcyclohexane (13) and 2-phenylcyclohexanols (10 and 11). trans-2-Phenylcyclohexanol (10) was the dominant isomer; the hydrogenolysis resulted in the predominant configurational retention. Compound 13 was confirmed to be produced via 1-phenylcyclohexene (12). This deoxygenation may be explained by a mechanism involving the radical cleavage reaction of 3. The presence of sodium hydroxide led to the formation of cis-2-phenylcyclohexanol (11). The Pd catalysed hydrogenolysis also gave mainly 11.The difference in behaviour of cyclopropane, azidirine and epoxide we ascribe to the differences in the affinity for the catalyst and differences in the electronegativity between C, N and O atoms.