Intercomparison of retrieval codes used for the analysis of high-resolution, ground-based FTIR measurements

A rigorous and systematic intercomparison of codes used for the retrieval of trace gas profiles from high-resolution ground-based solar absorption FTIR measurements is presented for the first time. Spectra were analyzed with the two widely used independent, retrieval codes: SFIT2 and PROFFIT9. Vertical profiles of O₃, HNO₃, HDO, and N₂O were derived from the same set of typical observed spectra. Analysis of O₃ was improved by using updated line parameters. It is shown that profiles and total column amounts are in excellent agreement, when similar constraints are applied, and that the resolution kernel matrices are also consistent. Owing to the limited altitude resolution of ground-based observations, the impact of the constraints on the solution is not negligible. It is shown that the results are also compatible for independently chosen constraints. Perspectives for refined constraints are discussed. It can be concluded that the error budget introduced by the radiative transfer code and the retrieval algorithm on total columns deduced from high-resolution ground-based solar FTIR spectra is below 1%.     

Analysis of tetracycline antibiotics using HPLC with pulsed amperometric detection.

The analysis of tetracycline, oxytetracyline, chlortetracycline and doxycycline by high-performance liquid chromatography with pulsed amperometric detection using an anodized boron-doped diamond thin film (BDD) electrode is originally reported. The analyses were carried out using the mobile phase, phosphate buffer (0.01 M, pH 2.5)-acetonitrile (80:20; v/v), on a C18 column (250 x 4.6 mm i.d., 5 microm) at a flow rate of 1.0 mL/min. The optimal PAD waveform parameters at the anodized BDD were 1.5 V (versus Ag/AgCl) detection potential (E(det)) for 290 ms (200 ms delay time and 90 ms integration time), 2.0 V (versus Ag/AgCl) oxidation potential (E(oxd)) for 200 ms oxidation time (t(oxd)) and 0.4 V (versus Ag/AgCI) reduction potential (E(red)) for 200 ms reduction time (t(red)). The proposed method showed the simultaneous determination of tetracycline, oxytetracyline, chlortetracycline and doxycycline with a linear range of 0.1 - 100 microg/mL, detection limits of 0.05 - 0.1 microg/mL and recoveries of 70.8 - 96.0%. The application of this method to real samples was demonstrated and validated using a shrimp sample.     

Frequency measuring system using mirror gap stabilized Fabry-Perot interferometer

The mirror gap of a Fabry-Perot interferometer was stabilized with two laser diodes; one locked to the line frequency 385,243,555.14445 MHz of the F=3<--1 in 5D(3/2)<--5S(1/2) (87Rb) and the other to the 385,284,566.3663 MHz of the F=4<--2 in 5D(5/2)<--5S(1/2) (87Rb) [Opt. Commun. 102 (1993) 432]. The length of the mirror gap was adjusted to generate the zero-cross points simultaneously at both of the two line positions. The fringe signals obtained from an interferometer thus stabilized can be used as frequency markers having accuracies of the order of 10(10) depending on the finesse of the interferometer used. Based on measurement using Cs D1 hyperfine lines reported by Udem et al. [Phys. Rev. Lett. 82 (1999) 3568], the uncertainty of markers in the region 50 THz apart from the reference lines is +/- 5 MHz.     

Direct dynamics trajectory study of the reaction of formaldehyde cation with D2: vibrational and zero-point energy effects on quasiclassical trajectories

Quasiclassical, direct dynamics trajectories have been used to study the reaction of formaldehyde cation with molecular hydrogen, simulating the conditions in an experimental study of H2CO+ vibrational effects on this reaction. Effects of five different H2CO+ modes were probed, and we also examined different approaches to treating zero-point energy in quasiclassical trajectories. The calculated absolute cross-sections are in excellent agreement with experiments, and the results provide insight into the reaction mechanism, product scattering behavior, and energy disposal, and how they vary with impact parameter and reactant state. The reaction is sharply orientation-dependent, even at high collision energies, and both trajectories and experiment find that H2CO+ vibration inhibits reaction. On the other hand, the trajectories do not reproduce the anomalously strong effect of nu2(+) (the CO stretch). The origin of the discrepancy and approaches for minimizing such problems in quasiclassical trajectories are discussed.     

Trajectory studies of S(N)2 nucleophilic substitution. 8. Central barrier dynamics for gas phase Cl(-) + CH(3)Cl

Quasiclassical direct dynamics trajectories, calculated at the MP2/6-31G level of theory, are used to study the central barrier dynamics for the C1(-) + CH(3)Cl S(N)2 reaction. Extensive recrossings of the central barrier are observed in the trajectories. The dynamics of the Cl(-)-CH(3)Cl complex is non-RRKM and transition state theory (TST) is predicted to be an inaccurate model for calculating the Cl(-) + CH(3)Cl S(N)2 rate constant. Direct dynamics trajectories also show that Cl(-) + CH(3)Cl trajectories, which collide backside along the S(N)2 reaction path, do not form the Cl(-)-CH(3)Cl complex. This arises from weak coupling between the Cl(-)-CH(3)Cl intermolecular and CH(3)Cl intramolecular modes. The trajectory results are very similar to those of a previous trajectory study, based on a HF/6-31G* analytic potential energy function, which gives a less accurate representation of the central barrier region of the Cl(-) + CH(3)Cl reaction than does the MP2/6-31G* level of theory used here. Experiments are suggested for investigating the non-RRKM and non-TST dynamics predicted by the trajectories.     

Unexpected formation of benzaldehydes by the reactions of dithioacetals derived from cinnamaldehydes with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents

1,3-Dithianes 1 , 1,3-dithiolanes 2 , and diphenyl dithioacetals 3 derived from cinnamaldehydes reacted with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents to give benzaldehydes 4 . Hydride transfer from 1–3 to 2,3-dichloro-5,6-dicyano-p-benzoquinone followed by hydrolysis and oxidative carbon-carbon bond cleavage would produce benzaldehydes 4 .     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

The catalytic hydrogenolysis of 1-phenylbicyclo[4.1.0]heptane and the corresponding azidirine and epoxide

The hydrogenolysisof 1-phenylbicyclo[4.1.0]heptane (1a), cis-1-phenyl-2-methylbicyclo[4.1.0]heptane (1b), 1-phenyl-7-azabicyclo[4.1.0]heptane (2) and 1-phenyl-7-oxabicyclo[4.1.0]heptane (3) was studied using Ni, Pd, Rh and Pt as catalysts. The hydrogenolysis of the C₁C₇ bond of 1a and 1b led to the selective formation of trans-1-phenyl-2-methylcyclohexane (4a) with retention of configuration. Compound 1a gave not only 4a but also phenylcycloheptane (6a), which is the product of C₁C₆ bond fission, and the ratio of 6a to 4a increased in the sequence: Ni ? Pd, Rh < Pt. No C₁C₆ bond fission was observed in the hydrogenolysis of 1b. These results can be explained by a mechanism involving the formation of the π-benzyl complex.trans-2-Phenylcyclohexylamine (8) was obtained stereoselectively in the hydrogenolysis of 2 over Raney Ni. This selective formation can be ascribed to the competition of “SN i” and “radical” processes. The Pd catalysed hydrogenolysis gave cis-2-phenylcyclohexylamine (9) as the main product, while the presence of sodium hydroxide promoted the formation of 8.Raney Ni catalysed hydrogenolysis of 3 yielded a mixture of phenylcyclohexane (13) and 2-phenylcyclohexanols (10 and 11). trans-2-Phenylcyclohexanol (10) was the dominant isomer; the hydrogenolysis resulted in the predominant configurational retention. Compound 13 was confirmed to be produced via 1-phenylcyclohexene (12). This deoxygenation may be explained by a mechanism involving the radical cleavage reaction of 3. The presence of sodium hydroxide led to the formation of cis-2-phenylcyclohexanol (11). The Pd catalysed hydrogenolysis also gave mainly 11.The difference in behaviour of cyclopropane, azidirine and epoxide we ascribe to the differences in the affinity for the catalyst and differences in the electronegativity between C, N and O atoms.