Identification of Al(III) species in a solution containing equimolar concentrations of Al(III) and citric acid using varying-temperature 27Al NMR spectrometry.

27Al NMR spectra of an equimolar (10 mM) Al(III)-citrate system were obtained at different temperatures. The linewidths of the signals decreased in the spectra recorded at elevated temperatures, which enabled us to unequivocally identify the resonance lines. From the spectrum recorded at 65 approximately C, a mononuclear Al(III)-citrate complex was identified at a solution pH of 3.0 in addition to trinuclear Al(III)-citrate complex, which dominated at pH 4.0.     

Analysis of tetracycline antibiotics using HPLC with pulsed amperometric detection.

The analysis of tetracycline, oxytetracyline, chlortetracycline and doxycycline by high-performance liquid chromatography with pulsed amperometric detection using an anodized boron-doped diamond thin film (BDD) electrode is originally reported. The analyses were carried out using the mobile phase, phosphate buffer (0.01 M, pH 2.5)-acetonitrile (80:20; v/v), on a C18 column (250 x 4.6 mm i.d., 5 microm) at a flow rate of 1.0 mL/min. The optimal PAD waveform parameters at the anodized BDD were 1.5 V (versus Ag/AgCl) detection potential (E(det)) for 290 ms (200 ms delay time and 90 ms integration time), 2.0 V (versus Ag/AgCl) oxidation potential (E(oxd)) for 200 ms oxidation time (t(oxd)) and 0.4 V (versus Ag/AgCI) reduction potential (E(red)) for 200 ms reduction time (t(red)). The proposed method showed the simultaneous determination of tetracycline, oxytetracyline, chlortetracycline and doxycycline with a linear range of 0.1 - 100 microg/mL, detection limits of 0.05 - 0.1 microg/mL and recoveries of 70.8 - 96.0%. The application of this method to real samples was demonstrated and validated using a shrimp sample.     

Frequency measuring system using mirror gap stabilized Fabry-Perot interferometer

The mirror gap of a Fabry-Perot interferometer was stabilized with two laser diodes; one locked to the line frequency 385,243,555.14445 MHz of the F=3<--1 in 5D(3/2)<--5S(1/2) (87Rb) and the other to the 385,284,566.3663 MHz of the F=4<--2 in 5D(5/2)<--5S(1/2) (87Rb) [Opt. Commun. 102 (1993) 432]. The length of the mirror gap was adjusted to generate the zero-cross points simultaneously at both of the two line positions. The fringe signals obtained from an interferometer thus stabilized can be used as frequency markers having accuracies of the order of 10(10) depending on the finesse of the interferometer used. Based on measurement using Cs D1 hyperfine lines reported by Udem et al. [Phys. Rev. Lett. 82 (1999) 3568], the uncertainty of markers in the region 50 THz apart from the reference lines is +/- 5 MHz.     

Vibrational spectra and molecular conformations of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes

The Raman and IR spectra of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes have been measured. The normal coordinates have been calculated for these molecules using a consistent set of force constants and the molecular conformations studied by analysing the spectra with reference to the results of the calculations. In the crystalline solid state, 1,5-dichloropentane assumes the trans-trans-trans-gauche form and 1,5-dibromopentane, 1,6-dichloro- and 1,6-dibromohexanes assume the all-trans form. The normal coordinate treatment with the well-established force field was of great help in determining the whole molecular form of the relatively large chain molecules.     

Unexpected formation of benzaldehydes by the reactions of dithioacetals derived from cinnamaldehydes with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents

1,3-Dithianes 1 , 1,3-dithiolanes 2 , and diphenyl dithioacetals 3 derived from cinnamaldehydes reacted with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents to give benzaldehydes 4 . Hydride transfer from 1–3 to 2,3-dichloro-5,6-dicyano-p-benzoquinone followed by hydrolysis and oxidative carbon-carbon bond cleavage would produce benzaldehydes 4 .     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

Viscosities of poly(N-vinylacetamide) solutions in the presence of salts, urea and guanidine hydrochloride

Summary  In the aqueous solutions of poly(N-vinylacetamide) in the presence of Na₂SO₄ or (NH₄)₂SO₄, the intrinsic viscosities were small and the Huggins constants were large compared with those in water. Similar but much less effects were observed for NaF. Opposite effects were found, however, for NaSCN. The poor solvent quality of aqueous sulfate solutions was significantly improved by the addition of guanidine hydrochloride to 3 M or higher. Urea was much less effective in improving the solvent quality. The different M28.8neffects observed between urea and GdnHCl may be explained by their different binding affinities to amide group. Solubilization of PNVA flocculates induced by the presence of 0.8 M Na₂SO₄ took place by adding urea to 1 M, although only small changes were detected in the viscosity behavior accompanying the addition of 1 M urea. Received: 12 June 1997 Accepted: 4 August 1997     

The catalytic hydrogenolysis of 1-phenylbicyclo[4.1.0]heptane and the corresponding azidirine and epoxide

The hydrogenolysisof 1-phenylbicyclo[4.1.0]heptane (1a), cis-1-phenyl-2-methylbicyclo[4.1.0]heptane (1b), 1-phenyl-7-azabicyclo[4.1.0]heptane (2) and 1-phenyl-7-oxabicyclo[4.1.0]heptane (3) was studied using Ni, Pd, Rh and Pt as catalysts. The hydrogenolysis of the C₁C₇ bond of 1a and 1b led to the selective formation of trans-1-phenyl-2-methylcyclohexane (4a) with retention of configuration. Compound 1a gave not only 4a but also phenylcycloheptane (6a), which is the product of C₁C₆ bond fission, and the ratio of 6a to 4a increased in the sequence: Ni ? Pd, Rh < Pt. No C₁C₆ bond fission was observed in the hydrogenolysis of 1b. These results can be explained by a mechanism involving the formation of the π-benzyl complex.trans-2-Phenylcyclohexylamine (8) was obtained stereoselectively in the hydrogenolysis of 2 over Raney Ni. This selective formation can be ascribed to the competition of “SN i” and “radical” processes. The Pd catalysed hydrogenolysis gave cis-2-phenylcyclohexylamine (9) as the main product, while the presence of sodium hydroxide promoted the formation of 8.Raney Ni catalysed hydrogenolysis of 3 yielded a mixture of phenylcyclohexane (13) and 2-phenylcyclohexanols (10 and 11). trans-2-Phenylcyclohexanol (10) was the dominant isomer; the hydrogenolysis resulted in the predominant configurational retention. Compound 13 was confirmed to be produced via 1-phenylcyclohexene (12). This deoxygenation may be explained by a mechanism involving the radical cleavage reaction of 3. The presence of sodium hydroxide led to the formation of cis-2-phenylcyclohexanol (11). The Pd catalysed hydrogenolysis also gave mainly 11.The difference in behaviour of cyclopropane, azidirine and epoxide we ascribe to the differences in the affinity for the catalyst and differences in the electronegativity between C, N and O atoms.