Resonance-enhanced multiphoton ionization mass spectrometry using a two-color laser beam generated by stimulated Raman scattering.

Two-color (1+1') resonance-enhanced multiphoton ionization/time-of-flight mass spectrometry (REMPI/TOF-MS) combined with supersonic jet (SSJ) spectrometry has been demonstrated. The methodology uses a two-color laser beam consisting of a Stokes beam generated by stimulated Raman scattering (SRS) and a fundamental beam for the excitation and subsequent ionization of p-dichlorobenzene. The MPI signal was found to be substantially increased when a two-color laser beam was employed. This approach greatly simplifies the analytical system and reduces the cost of the instrumentation required for two-color ionization. The potential advantage of applying this method for the analysis of polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) emitted from an incinerator is discussed.     

Large-volume injection electrothermal AAS combined with tungsten-treated pyrolytic graphite furnace: determination of cadmium in tap, snow and river water samples with phosphate modifier.

A large-volume (100 microl) injection-ETAAS with W-treated PG furnace combined with a phosphate modifier was applied to the determination of unpolluted levels of Cd in tap, snow and river-water samples. The limit of detection of 1.1 ng l(-1) was observed for a 4 w/v% NH4H2PO4 modifer. Matrix interference studies were tested for major ion species well found in fresh water. The direct determination of Cd in certified river water (12 +/- 2 ng l(-1)) was carried out and the observed value was in agreement with the certified one. The good recoveries of Cd added to real environmental water samples were also observed. This method was applied to the determination of Cd in unpolluted environmental water samples.     

Reconstruction of the Point-Spread Function of the Human Eye Using a New Phase-Retrieval Algorithm

The double-pass method is thought to obtain the point spread function (PSF) in human eyes based on two techniques: the symmetric double-pass method using the same pupil size and the asymmetric double-pass method using a different pupil size. The symmetric double-pass method provides autocorrelation of the retinal PSF and, thus, the modulation transfer function. The asymmetric double-pass method provides low-frequency partial-phase information and the partial phase-retrieval algorithm is applied to obtain the complete-phase information, and to estimate the PSF. The partial phase-retrieval algorithm is based on the iteration method proposed by Fineup and Kowalczyk and requires a lengthy computation. In this study, we propose a new high-speed phase-retrieval algorithm based on the property that the real and imaginary parts of optical transfer functions (OTFs) continuously change in value.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Direct determination of benzamides in serum by column-switching high-performance liquid chromatography.

A column-switching high-performance liquid chromatographic method with fluorescence detection was developed for the simultaneous determination of four benzamide-type anti-psychotic drugs: sulpiride, tiapride, sultopride and metoclopramide in human serum. In this method, a TSKgel Super-ODS column was used as an analytical column, and a TSKgel G 2000SW was prepared as a pretreatment column. Under the optimized analytical conditions, four benzamide-type anti-psychotic drugs were eluted within 18 min. The detection limits (S/N = 3) for sulpiride, tiapride, sultopride and metoclopramide are 1 ng/ml, 4 ng/ml, 2 ng/ml and 0.5 ng/ml, respectively. Finally, the method was applied to the determination of sulpiride in human serum samples obtained after a single oral dose of sulpiride.     

Synthesis of 2-amino-2,4-anhydro-3-O-(2-tetrahydropyranyl)-psicofuranose: a versatile intermediate for S-type locked nucleosides

2-Amino-2,4-anhydro-psicofuranose derivative was synthesized starting from d-fructose.     

Simple and rapid determination of trace amounts of gold(III), palladium(II), and platinum(IV) in industrial waste solutions after recovery of noble metals by combined use of GFAAS and anion-exchange separation.

A simple and rapid method for the analysis of trace amounts of gold(III), palladium(II), and platinum(IV) by the combined use of graphite furnace atomic absorption spectrometry and anion-exchange separation was proposed, and successfully applied to the rapid determination of metals in industrial waste solutions obtained from the final process of noble-metal recovery factories, because noble metals can be selectively and quantitatively separated to a high degree by using a small column containing only a 0.7 g-portion of a common anion-exchange resin and a dilute thiourea solution.     

Addition reactions of cyclooctatetraene with 1,3-diphenylisobenzofuran the benzene ring as dienophile in a [4+2] cycloaddition reaction

Addition reactions of cyclooctatetraene with 1,3-diphenylisobenzofuran resulted in the formation of three 1:1 cycloadducts, 1, 2, and 3, and a 1:2 cycloadduct, 4. Single crystal x-ray analysis established 3 to be a cage compound formed by an unprecedented [4+2] cycloaddition reaction of 1 in which the double bond of the benzene moiety acted as the dienophile.     

Novel quinazoline ring synthesis by cycloaddition of N-arylketenimines with N,N-disubstituted cyanamides

The reaction of N-aryl-substituted ketenimines with N,N-disubstituted cyanamides or (MeS)2C=N-CN under high pressure afforded 4-(N,N-disubstituted amino) or 4-(MeS)2C=N-substituted quinazoline derivatives, respectively. These products were formed by [4+2] cycloaddition between the aza-diene moieties of the N-arylsubstituted ketenimines and cyano groups. A 4-(unsubstituted amino)quinazoline derivative was synthesized by hydrolysis of the latter product.