D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

Evaluation of radioimmunoassay of the blood tobramycin level for the purpose of setting the dosage based on the clinical pharmacokinetic theory and a comparison of radioimmunoassay with other assay methods

With the purpose to use for therapeutic drug monitoring (TDM), blood concentrations of tobramycin (TOB) in each patient were measured by radioimmunoassay (RIA). A RIA kit of TOB (Clinical assay-Japan Travenol) was evaluated for precision and recovery, in that partial improvement of the method was made, in order to measure low level of TOB. The RIA was compared with high-performance-liquid-chromatography (HPLC), bioassay (BA) and 2 kinds of enzyme immunoassay (EIA) (EMIT and SLFIA). The RIA of TOB revealed high precision (1.8-2.4% in C.V.) and high reproducibility (5.0-6.9% in C.V.). It was found that this RIA kit can be used for measuring low level of serum TOB concentrations by a modification of the method. The total range of measurable blood level is from 0.1 to 16.0 micrograms/ml. The nearly one to one correspondence was observed between RIA and other 4 methods, when 154 samples obtained from 18 cases were measured. A representative case of TDM for TOB was demonstrated, in which predicted concentrations agreed fairly well with actual measured values at steady state. It was concluded that the RIA kit is useful for clinical application of TDM for the adequate dosage regimen of TOB. Modification of the method for rapid assay of a small number of samples will increase the clinical usefulness.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Conformational effects on lipase-mediated acylations of 2-substituted cyclohexanols

Lipase-mediated acetylations of trans- and cis-2-substituted cyclohexanols gave the corresponding (1R)-cyclohexyl acetates and (1S)-cyclohexanols in high yields and ee, but c-4-tert-butyl-c-2-ethenyl-r-1-cyclohexanol was unreactive owing to the steric interaction between the axial OH group and the axial H atoms at the 3- and 5-positions. In the cis-isomer the OH group occupies an equatorial position to bind to the lipase, and less bulky axial alkenyl and alkynyl groups might not so much prevent acetylations than an alkyl group.     

Capacitance-conductance detector for high-pressure liquid chromatography. Application to alkaloids and fatty acids

Summary A new type of detector for high-pressure liquid chromatography has been designed. This detector is equipped with a RC resonance circuit, and is similar to the capacitance detector previously reported. It is operated as a capacitance detector with nonpolar eluents; while with polar solvents, it behaves as a conductance detector. Electrolytes such as salts, acids and bases are sensitively detected. The detector was successfully used for the detection of fatty acids and alkaloids.

---

Zusammenfassung Ein neuartiger Detektor für die Hochdruck-Flüssigchromatographie wurde entwickelt. Dieser ist mit einem Resonanzstromkreis ausgestattet und ähnelt dem kürzlich beschriebenen Kapazitanz-Detektor. Als solcher funktioniert er mit nichtpolaren Eluenten, während er sich mit polaren Lösungsmitteln wie ein Leitfähigkeitsdetektor verhält. Salze, Säuren und Basen werden empfindlich nachgewiesen. Das Gerät wurde zum Nachweis von Fettsäuren und Alkaloiden verwendet.

     

Synthesis of Urea‐Tethered Disaccharides in Water

A new method for the synthesis of urea‐linked disaccharides in aqueous media has been developed. The key feature of our approach is two strained Steyermark‐type gluco‐ and galactopyranosyl oxazolidinones. Each oxazolidinone is attached to a pyranose ring in a di‐equatorial trans‐annulation framework. Reaction of these oxazolidinones with 4‐aminohexopyranose in water proceeded smoothly to afford the urea‐tethered cellobiose and lactose analogues. The galactose‐type oxazolidinone proved to be more reactive than the glucose‐type, which is explained by the presence of an axial hydroxy group at C4 in the former.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Theoretical study of the Cp2Zr-catalyzed hydrosilylation of ethylene. Reaction mechanism including new sigma-bond activation

The Cp(2)Zr-catalyzed hydrosilylation of ethylene was theoretically investigated with DFT and MP2-MP4(SDQ) methods, to clarify the reaction mechanism and the characteristic features of this reaction. Although ethylene insertion into the Zr-SiH(3) bond of Cp(2)Zr(H)(SiH(3)) needs a very large activation barrier of 41.0 (42.3) kcal/mol, ethylene is easily inserted into the Zr-H bond with a very small activation barrier of 2.1 (2.8) kcal/mol, where the activation barrier and the energy of reaction calculated with the DFT(B3LYP) method are given and in parentheses are those values which have been corrected for the zero-point energy, hereafter. Not only this ethylene insertion reaction but also the coupling reaction between Cp(2)Zr(C(2)H(4)) and SiH(4) easily takes place to afford Cp(2)Zr(H)(CH(2)CH(2)SiH(3)) and Cp(2)Zr(CH(2)CH(3))(SiH(3)) with activation barriers of 0.3 (0.7) and 5.0 (5.4) kcal/mol, respectively. This coupling reaction involves a new type of Si-H sigma-bond activation which is similar to metathesis. The important interaction in the coupling reaction is the bonding overlap between the d(pi)-pi bonding orbital of Cp(2)Zr(C(2)H(4)) and the Si-H sigma orbital. The final step is neither direct C-H nor Si-C reductive elimination, because both reductive eliminations occur with a very large activation barrier and significantly large endothermicity. This is because the d orbital of Cp(2)Zr is at a high energy. On the other hand, ethylene-assisted C-H reductive elimination easily occurs with a small activation barrier, 5.0 (7.5) kcal/mol, and considerably large exothermicity, -10.6 (-7.1) kcal/mol. Also, ethylene-assisted Si-C reductive elimination and metatheses of Cp(2)Zr(H)(CH(2)CH(2)SiH(3)) and Cp(2)Zr(CH(2)CH(3))(SiH(3)) with SiH(4) take place with moderate activation barriers, 26.5 (30.7), 18.4 (20.5), and 28.3 (31.5) kcal/mol, respectively. From these results, it is clearly concluded that the most favorable catalytic cycle of the Cp(2)Zr-catalyzed hydrosilylation of ethylene consists of the coupling reaction of Cp(2)Zr(C(2)H(4)) with SiH(4) followed by the ethylene-assisted C-H reductive elimination.