Mineralogical analysis of auriferous ores from the El Diamante mine, Colombia

X-ray diffraction (XRD), Mössbauer spectrometry (MS), secondary ions mass spectroscopy (SIMS) and laser-ablation microprobe–inductively coupled plasma–mass spectrometry (LAM–ICP–MS) were used to study mineral samples of Colombian auriferous ores collected from the “El Diamante” mine, located in the municipality of Guachavez-Nariño, in Colombia. The samples were prepared as polished thin sections and polished sections. From XRD data, quartz, sphalerite and pyrite were detected and their respective cell parameters were estimated. From MS analyses, pyrite, arsenopyrite and chalcopyrite were identified; their respective hyperfine parameters and respective texture were deduced. Multiple regions of approximately 200 × 200 μm in each sample were analyzed with SIMS; the occurrence of “invisible gold” associated mainly with pyrite and secondarily with arsenopyrite could thus be assigned. It was also found that pyrite is of the arsenious type. Spots from 30 to 40 μm in diameter were analyzed with LAM–ICP–MS for pyrite, arsenopyrite and sphalerite; Au is “homogeneously” distributed inside the structure of the arsenious pyrite and the arsenopyrite (not as inclusions); the chemical composition indicates similarities of this “invisible gold”, forming a solid solution with arsenious pyrite and arsenopyrite. One hundred nineteen and 62 ppm of ‘invisible gold’ was quantified in 21 spots analyzed on pyrite and in 14 spots on arsenopyrite, respectively.     

Magnetic and structural properties of mechanically alloyed Tb0.257−x Nd x Fe0.743 alloys, with x = 0 and 0.257

The alloys between a transition metal and a rare earth present magnetic and magneto optical properties of exceptional interest for the production of magnetic devices for information storage. In this work we report the magnetic and structural properties, obtained by Mössbauer spectrometry (MS) and X-ray diffraction (XRD), of Tb_0.257?x Nd _x Fe_0.743 alloys with x?=?0 and 0.257 prepared by mechanical alloying during 12, 24 and 48 h, to study the influence of the milling time in their magnetic and structural properties. The X-rays results show for all the samples that the α-Fe and an amorphous phase are always present. The first decreases and the second increases with the increase of the milling time. Mössbauer results show that the amorphous phase in samples with Nd is ferromagnetic and appears as a hyperfine field distribution and a broad doublet, and that as the milling time increases the paramagnetic contribution increases. For samples with Tb the amorphous phase is paramagnetic and appears as a broad doublet which increases with the milling time and for 48 h milling it appears an additional broad singlet.     

Photophysics and Photochemistry of z‐Chlorprothixene in Acetonitrile†

Chlorprothixene (CPTX, Taractan^®) is a low potency antipsychotic mainly used for the treatment of psychotic disorders (e.g. schizophrenia) and acute mania occurring as part of bipolar disorders. As in the case of other numerous drugs used in the treatment of psychiatric disorders, CPTX presents geometric isomerism. Therefore, in vitro irradiation induces a rapid Z/E isomerization, which can affect its pharmacokinetic properties. This photoisomerization is not dependent on the oxygen concentration. The Z/E quantum yields determined for zCPTX in acetonitrile are 0.22 and 0.21 in anaerobic and aerobic environments, respectively. In the presence of water, both isomers decompose to produce 2‐chlorothioxanthone (CTX) after prolonged irradiation. This process strongly depends on the water concentration and the irradiation time, i.e. it is autocatalyzed by the CTX through a triplet‐energy transfer mechanism. The protonation state of the terminal amino group, on the other hand, has no effect on the isomerization process, but inhibits the formation of CTX. These results indicate that the phototoxicity of zCPTX is somehow affected by the formation of CTX.     

Synthesis of azepino[3,4b]indoles via the Plancher rearrangement

The reaction of benzyl 3-formylpiperidine-1-carboxylate and aryl hydrazines under standard Fisher Indole conditions followed by reductive work-up affords azepino[3,4b]indoles in moderate to good yields. The products are proposed to be derived via a Plancher rearrangement [(a) Plancher, G. Gazz. Chim. Ital. 1898, 28, II, 374; (b) Plancher, G. Atti. Accad.Lincei1900, 9, 5, 115; (c) Boyd-Barrett, H. S. J. Chem. Soc.1932, 321].     

Structural and Electronic Properties Study of Colombian Aurifer Soils by Mössbauer Spectroscopy and X-ray Diffraction

In this work a study on gold mineral samples is reported, using optical microscopy, X-ray diffraction (XRD) and Mössbauer spectroscopy (MS). The auriferous samples are from the El Diamante mine, located in Guachavez-Nariño (Colombia) and were prepared by means of polished thin sections. The petrography analysis registered the presence, in different percentages that depend on the sample, of pyrite, quartz, arsenopyirite, sphalerite, chalcopyrite and galena. The XRD analysis confirmed these findings through the calculated cell parameters. One typical Rietveld analysis showed the following weight percent of phases: 85.0% quartz, 14.5% pyrite and 0.5% sphalerite. In this sample, MS demonstrated the presence of two types of pyrite whose hyperfine parameters are δ ₁ = 0.280 ± 0.002 mm/s and Δ ₁ = 0.642 ± 0.002 mm/s, δ ₂ = 0.379 ± 0.002 mm/s and Δ ₂ = 0.613 ± 0.002 mm/s.     

Magnetic and Structural Properties of the Mechanically Alloyed Nd2(Fe100 − x Nb x )14B System

In this work we report the magnetic and structural properties obtained by Mössbauer spectrometry, Vibrating Sample Magnetometer and X-ray diffraction of milled powders with initial composition Nd₂(Fe_{100 ? x} Nb _x )₁₄B with x = 0 and x = 4. The mixtures were ball milled for different times up to 240 h. Structural and microstructural parameters were derived from high statistics X-ray patterns and discussed as a function of milling time. The Mössbauer spectra of the samples were fitted by means of a sextet and an hyperfine field distribution, associated to a pure iron phase (α-Fe) and a disordered iron-based phase, respectively. The α-Fe grain size decreases from 50 nm for 6 h up to 5 nm for 240 h milling time. The Vibrating Sample Magnetometer results allow to conclude that these samples behave as soft ferromagnets.     

Comparative Study by MS and XRD of Fe50Al50 Alloys Produced by Mechanical Alloying, Using Different Ball Mills

In this work we report a comparative study of the magnetic and structural properties of Fe₅₀Al₅₀ alloys produced by mechanical alloying using two different planetary ball mills with the same ball mass to powder mass relation. The Fe₅₀Al₅₀ sample milled during 48 h using the Fritsch planetary ball mill pulverisette 5 and balls of 20 mm, presents only a bcc alloy phase with a majority of paramagnetic sites, whereas that sample milled during the same time using the Fritsch planetary ball mill pulverisette 7 with balls of 15 mm, presents a bcc alloy phase with paramagnetic site (doublet) and a majority of ferromagnetic sites which include pure Fe. However for 72 h of milling this sample presents a bcc paramagnetic phase, very similar to that prepared with the first system during 48 h. These results show that the conditions used in the first ball mill equipment make more efficient the milling process.     

Role of sequence and conformation on the photochemistry and the photophysics of A-T DNA dimers: an experimental and computational approach

The role of base sequence and conformation on the photochemistry and photophysics of thymidylyl (3'-5')-2'-deoxyadenosine sodium salt (TpdA) and 2-deoxyadenylyl (3'-5')-thymidine ammonium salt (dApT) was studied. To this end, nanosecond transient absorption at 266 nm, steady-state irradiation at 254 nm, and quantum chemical calculations were used. The transient absorption spectra show the solvated electron broad band in the visible region for each dinucleotide. In addition, low-intensity absorption bands are observed in the UV region, which are attributed to the deprotonated and protonated neutral radicals of adenine and thymine bases. Photoionization (PI) occurs by one- and two-photon pathways; the latter accounting for approximately 70% of the net PI yield. A diffusion-limited rate constant of 2.0 x 10(10) M(-1) s(-1) was obtained for the reaction of the neutral molecule with the photoejected electron in both sequences. The photodestruction yield, measured from the chromophore loss at 260 nm, decreases in the presence of well-known electron scavengers. This suggests the participation of base radical anions as one of the photodegradation pathways, which is higher in TpdA than in dApT. The intermediacy of a radical ion pair (charge separated state) between the adjacent adenine and thymine bases is proposed in the formation of the [2 + 2] cycloadduct intermediate. The [2 + 2] cycloadduct intermediate is known to be the precursor of the thymine-adenine eight-member ring photoproduct (TA*). Conformational constrains in the radical ion pair are suggested to explain the absence of the TA* photoproduct in dApT. This hypothesis is supported by semiempirical calculations performed on all relevant reactive intermediates proposed to participate in the mechanism of formation of TA*. Altogether, the results show that sequence and conformation profoundly influence the photochemistry and the photophysics of these DNA model systems.     

Photodegradation of 2-chloro substituted phenothiazines in alcohols

The mechanisms that trigger the phototoxic response to 2-chlorophenothiazine derivatives are still unknown. To better understand the relationship between the molecular structure of halogenated phenothiazines and their phototoxic activity, their photophysics and photochemistry were studied in several alcohols. The photodestruction quantum yields were determined under anaerobic conditions using monochromatic light (313 nm). Absorption- and emission-spectroscopy, ¹H- and ¹³C-NMR and GC-MS were used to characterize the photoproducts and reference compounds. An electron transfer mechanism had been previously proposed by Bunce et al . ( J. Med. Chem . 22 , 202–204) to explain the large difference between the photodestruction quantum yield of 2-chlorpromazine (φ = 0.46) and 2-chlorphenothiazine (φ = 0.20). According to these authors, the alkylamino chain transfers an electron to the phenothiazine moiety. Our results demonstrate that this mechanism is incorrect, because the photodestruction quantum yields of all chlorinated derivatives of this study are the same under the same conditions of solvent and irradiation wavelength. The quantum yield has no dependence on the 10-substituent, but it depends on the solvent. The percentage of each photoproduct, on the other hand, strongly depends on that substituent, but not very much on the solvent. Finally, it is demonstrated that the phototoxic effect of chlorinated phenothiazines is not related to the photodechlorination, although both processes share the same transient.     

Characterization of mineral phases of agricultural soil samples of Colombian coffee using M?ssbauer spectroscopy and X-ray diffraction

Friedreich ataxia is a disease that is associated with defects in the gene coding for a small protein frataxin. Several different roles have been proposed for the protein, including iron chaperoning and iron storage. M?ssbauer spectroscopy was used to probe these hypotheses. Iron accumulation in mutant mitochondria unable to assemble iron sulfur clusters proved to be insensitive to overexpression of frataxin, ruling out its potential involvement as an iron storage protein similar to ferritin. Rather, it was found that frataxin negatively regulates iron sulfur cluster assembly.