Understanding the dehydrogenation mechanism over iron nanoparticles catalysts based on density functional theory

The conversion of chemical feedstock materials into high value-added products accompanied with dehydrogenation is of great value in the chemical industry.However,the catalytic dehydrogenation reaction is inhibited by a limited number of expensive noble metal catalysts and lacks understanding of dehydrogenation mechanism.Here,we report the use of heterogeneous non-noble metal iron nanoparticles(NPs) incorporated mesoporous nitrogen-doped carbon to investigate the dehydrogenation mechanism based on experiment observation and density functional theory(DFT) method.Fe NPs catalyst displays excellent performance in the dehydrogenation of 1,2,3,4-tetrahydroquinoline(THQ)with 100% selectivity and 100% conversion for 10-12 h at room temperature.The calculated adsorption energy implies that THQ prefers to adsorb on Fe NPs as compared with absence of Fe NPs.What is more,the energy barrier of transition state is relatively low,illustrating the dehydrogenation is feasible.This work provides an atomic scale mechanism guidance for the catalytic dehydrogenation reaction and points out the direction for the design of new catalysts.     

UPLC-QTOF-MS法研究甘油三酯作为水生环境中农药污染的潜在生物标志物

以鲫鱼为代表性研究对象,采用超高效液相色谱-四极杆飞行时间质谱(UPLC-QTOF-MS)技术,分别研究了3种农药(敌百虫、高效氯氰菊酯和吡虫啉)对其体内代谢的影响.通过Masslynx软件在MSE模式下采集数据,使用UNIFI软件进行自动检测和数据过滤,并将差异性物质与在线代谢组数据库进行比较,鉴定出甘油三酯类(TGs)物质具有明显差异.其中,吡虫啉对TGs代谢的影响最大,且肝脏的代谢差异比大脑更显著,低浓度的急性暴露诱导肝脏中的TGs积累,其含量与暴露浓度之间的关系符合Michaelis-Menten方程的增长趋势.结果表明,TGs可在短时间内(≤2 h)灵敏地反映农药吡虫啉的低浓度(≤20 ng/m L)暴露,可作为考察吡虫啉对水生生物毒性的潜在生物标记物,有助于建立一种快速、灵敏的预警方法.     

Facile Synthesis of Manganese Tellurite Nanoparticles for Magnetic Resonance Imaging-Guided Photothermal Therapy

In this study, manganese tellurite (MnTeO₃) nanoparticles are developed as theranostic agents for magnetic resonance imaging (MRI)-guided photothermal therapy of tumor. MnTeO₃ nanoparticles are synthesized via a simple one-step method. The as-synthesized MnTeO₃ nanoparticles with uniform size show good biocompatibility. In particular, MnTeO₃ nanoparticles exhibit a high photothermal conversion efficiency (η = 26.3%), which is higher than that of gold nanorods. Moreover, MnTeO₃ nanoparticles also have high MRI performance. The longitudinal relaxivity (r₁) value of MnTeO₃ nanoparticles is determined to be 8.08 ± 0.2 mm ⁻¹ s⁻¹, which is higher than that of clinically approved T₁-contrast agents Gd-DTPA (4.49 ± 0.1 mm ⁻¹ s⁻¹). The subsequent MnTeO₃ nanoparticles-mediated photothermal therapy displays a highly efficient ablation of tumor cells both in vitro and in vivo with negligible toxicity. It is demonstrated that MnTeO₃ nanoparticles can serve as promising theranostic agents with great potentials for MRI-guided photothermal therapy.     

Tantalum Nitride Nanosheets for Photoacoustic Imaging-Guided Photothermal Cancer Therapy

In this study, the synthesis of TaN nanosheets and their application in theranostic agents is reported. After coating polyethylene glycol (PEG) on the TaN nanosheets, the as-synthesized PEG-modified TaN nanosheets (TaN-PEG) show good stability and biocompatibility. Because of their high absorbance in the near-IR region, TaN-PEG can be utilized as photoacoustic imaging contrast agents for tumor imaging. Moreover, TaN-PEG has significant photothermal conversion performance, exhibiting effective laser-induced tumor ablation capability. The TaN-PEG possessing excellent photoacoustic contrast effect and photothermal properties thus have great promise in theranostic applications, especially imaging-guided cancer treatment.     

Improved electrochemical performance of LiNi0.5Mn1.5O4 as cathode of lithium ion battery by Co and Cr co-doping

Three samples, LiNi_0.5Mn_1.5O₄, LiNi_0.4Mn_1.4Co_0.2O₄, and LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, were prepared by sol–gel method and characterized by powder X-ray diffraction, Fourier transformed infrared spectroscope, scanning electron microscopy, Brunauer–Emmett–Teller surface area, four-probe resistance, cyclic voltammetry, electrochemical impedance spectroscopy, and charge–discharge test. It is found that the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ exhibits an improved performance compared with the Co-doped sample LiNi_0.4Mn_1.4Co_0.2O₄ and the undoped sample LiNi_0.5Mn_1.5O₄, especially at elevated temperature. At 25 °C, the discharge capacity of LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ is 130 mAh g^?1 at 0.1 C and 103 mAh g^?1 at 10 C. At an elevated temperature (55 °C), its 1 C discharge capacity is 136 mAh g^?1 and maintains 95.6 % of its initial capacity after 100 cycles. Compared with the reported results of LiNi_0.4Mn_1.4Co_0.2O₄ and LiNi_0.475Mn_1.475Co_0.05O₄, the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, with least content of Co, 0.05, possesses not only the high C-rate capacity but also the structural stability. The mechanism on the electrochemical performance improvement of LiNi_0.5Mn_1.5O₄ by the co-doping was discussed.     

Determination and removal of sulfonamides and quinolones from environmental water samples using magnetic adsorbents

In this study, the magnetic materials known as polymerized ionic liquid@3‐(trimethoxysilyl)propyl methacrylate@Fe₃O₄ nanoparticles were synthesized and utilized as potential adsorbents. First, these nanoparticles were applied to the analysis of sulfonamides and quinolones present in different water samples using magnetic solid phase extraction and high‐performance liquid chromatography. Under optimized conditions, the developed method showed excellent detection sensitivity, with limits of detection (S/N = 3) and quantification limits (S/N = 10) within 0.2–1.0 and 0.8–3.4 μg/L, respectively. The spiked recoveries of the SAs and QNs in environmental water samples ranged from 83.5 to 103.0%, with RSDs of less than 4.5%. In addition, the adsorbents effectively removed sulfamethoxazole and ofloxacin present in existing aquatic environments. The adsorption kinetics and isotherms of sulfamethoxazole and ofloxacin on the magnetic adsorbents were studied to assess removal performance. The results indicate that the adsorption process follows a pseudo‐second‐order mechanism, which reveals that the sorption mechanism is the rate‐limiting step and produces high q_max values (sulfamethoxazole = 70.35 mg/g and ofloxacin = 48.95 mg/g), thus demonstrating the enormous adsorption capacity of these magnetic adsorbents.     

Synergistic effects between a triazine-based charring agent and aluminum phosphinate on the intumescent flame retardance of thermoplastic polyether ester

The triazine-based charring agent (CFA) with perfect charring ability was synthesized and characterized. The synergistic effects between CFA and aluminum phosphinate (AlPi) on flame retardancy, thermal degradation, and flammability properties of thermoplastic polyester-ether elastomer (TPEE) were investigated by limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimeter test (CCT), thermogravimetric analysis (TGA), laser Raman spectroscopy (LSR) and scanning electron microscopy (SEM). The results from UL-94 test showed that, by compounding 14 wt% AlPi and 4 wt% CFA with TPEE, the LOI value reached 28.5% and the UL-94 rating reached V-0 (1.6 mm). TGA results indicated that there is good synergistic charring ability between CFA and AlPi, especially the increased residues at high temperature (T > 700 °C). The CCT test results showed that CFA could change the combustion behavior of TPEE and effectively accelerate the formation of expanded carbon layers. The residues after combustion were measured by LRS and SEM, demonstrating that CFA can promote the formation of dense and stable carbon layers during the combustion, which could inhibit the melt dropping and improve the fire retardancy of TPEE composites. Thus, CFA was a promising synergistic agent in halogen-free flame retardant TPEE.     

基于第一性原理的无铅无机钙钛矿Cs3Bi2X9(X=Cl、Br、I)光电性能表面效应研究

用基于第一性原理的密度泛函理论方法,对Cs₃Bi₂X₉(X=Cl、Br、I)的光电特性进行理论计算,并系统阐述这3种晶体的表面效应对光电性能的影响。结果表明,3种材料的光学特性由铋原子和卤素原子最外层p轨道上的价电子主导。在可见光区中,材料的吸收峰会随卤素原子序数的增加呈现红移,其中一维结构的Cs₃Bi₂Cl₉表面结构在光吸收能力上尤为特别且敏感;二维结构的Cs₃Bi₂Br₉光吸收能力会受厚度影响;零维结构的Cs₃Bi₂I₉非常稳定,且几乎不受表面特性和晶体厚度的影响。     

三种新型二苯砜氮杂环蕃N,N’-二对甲苯磺酰基-1,m-二氮杂[m.1]对环蕃-n-砜的合成与表征(m＝8,10,12; n＝15,17,19)

以N,N’-二对甲苯磺酰基-4,4’-二氨基二苯砜与二溴代烷为原料, 高度稀释条件下合成了三种新型有硫原子桥连的氮杂环蕃N,N’-二对甲苯磺酰基-1,8-二氮杂[8.1]对环蕃-15-砜(C); N,N’-二对甲苯磺酰基-1,10-二氮杂[10.1]对环蕃-17-砜(D); N,N’-二对甲苯磺酰基-1,12-二氮杂[12.1]对环蕃-19-砜(E). 提供了三种环蕃化合物的合成方法. 用IR, 1H NMR和元素分析证实了新化合物结构. 分析了化合物D的单晶结构数据, 为环蕃化合物的空间结构研究提供了晶体学依据.     

Electrodeposition of CuInSe2 films by an alternating double-potentiostatic method using nearly neutral electrolytes

One step electrodeposition with an alternating double-potentiostatic(DPSED) program was used to prepare CuInSe₂ thin films in nearly neutral aqueous electrolytes with sodium citrate complex. Linear sweep voltammetry(LSV) was measured to probe voltammetric properties of electrolytes with respect to Cu, In and Se individual precursor and their mixed solutions. Compositional and structural characteristics of the as-deposited and annealed films at 400 °C in Ar atmosphere for 0.5 h were analyzed by XRD and XPS. The results showed that reduction of Cu²⁺ to Cu⁺ at one potential point of ?800 mV and subsequently formation of CuIn alloy as well as metal In and amorphous Se at the other potential point of ?1400 mV were responsible for synthesis of CISe chalcopyrite. Composition self-regulation made DPSED films have three elements co-deposition and more uniform element distribution, which promoted chalcopyrite CISe formation.