A system for measuring absolute frequencies of up to 4.25 THz using a Josephson point contact

A system for measuring the absolute frequency of a far-infrared (FIR) laser is described. Josephson point contacts have been utilized in the system as a frequency harmonic mixer connecting microwaves and optically pumped CH₃OH laser lines. The Josephson point contacts are capable of generating beat signals of 90 GHz microwaves and FIR waves of up to 4.25 THz. To measure the frequency of the beat signals from the Josephson junction with a frequency counter, tracking oscillators have been developed, which tracks the beat signals by phase locking and regenerate clean signals for frequency counting. It is shown that the absolute frequency can be measured to an accuracy of about 100 Hz by using the tracking oscillators.     

Carbonyl allylations by 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide

2-Propenyl tin species, prepared from 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide in dichloromethane, causes nucleophilic addition to aldehydes to produce the corresponding homoallylic alcohols.     

Analysis of atomic arrangement in magnetic Fe–Pt nanoparticles

The order parameter S of Fe–Pt nanoparticles is estimated from X-ray diffraction (XRD) patterns. The total intensity of a diffraction peak is obtained by Rietveld analysis as well as simply integrating the intensity. The Rietveld analysis is found to provide a plausible value of S even for a sample showing an XRD pattern with broad and overlapped peaks. Another order parameter Q, which is obtained from Mössbauer spectra, is introduced, and it is confirmed that Q is equivalent to the probability of Fe atoms being in the L1₀-type atomic arrangement. The coercivity of Fe–Pt nanoparticles is directly proportional to Q, while it vanishes at S=0.4, indicating that the magnetic property of Fe–Pt nanoparticles has a closer relationship to Q than S.     

Hydrogel‐like elastic membrane consisting of semi‐interpenetrating polymer networks based on a phosphorylcholine polymer and a segmented polyurethane

To obtain a hydrogel‐like elastic membrane, we prepared semi‐interpenetrating polymer networks (IPNs) by the radical polymerization of methacrylates such as 2‐methacryloyloxyethyl phosphorylcholine (MPC), 2‐hydroxyethylmethacrylate, and triethyleneglycol dimethacrylate diffused into segmented polyurethane (SPU) membranes swollen with a monomer mixture. The values of Young's modulus for the hydrated semi‐IPN membranes were less than that for an SPU membrane because of higher hydration, but they were much higher than that for a hydrated MPC polymer gel (non‐SPU). According to a thermal analysis, the MPC polymer influenced the segment association of SPU. The diffusion coefficient of 8‐anilino‐1‐naphthalenesulfonic acid sodium salt from the semi‐IPN membrane could be controlled with different MPC unit concentrations in the membrane, and it was about 7 × 10² times higher than that of the SPU membrane. Fibroblast cell adhesion on the semi‐IPN membrane was effectively reduced by the MPC units. We concluded that semi‐IPNs composed of the MPC polymer and SPU may be novel polymer materials possessing attractive mechanical, diffusive‐release, and nonbiofouling properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 68–75, 2003     

Tris(1‐ethyl‐3‐methyl­imidazolium) hexa­chloro­lanthanate

In the title complex, (C₆H₁₁N₂)₃[LaCl₆], centrosymmetric octahedral hexa­chloro­lanthanate anions are located at the corners and face‐centers of the monoclinic unit cell. The ring H atoms of the cations interact with the Cl atoms of the anions via hydrogen bonding, and bifurcation of the hydrogen bonding is observed. Cation–cation interactions via hydrogen bonding between the ring H atoms and π‐electrons of aromatic rings are also observed as in other imidazolium salts.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Simultaneous determination of the binding of amantadine and its analogues to synthetic melanin by liquid chromatography after precolumn derivatization with dansyl chloride

For the determination of amantadine (1-ADA), 2-adamantanamine (2-ADA), memantine (MEM), and rimantadine (RIM) in melanin binding studies, the simultaneous determination of 1-ADA or 2-ADA, MEM, and RIM is investigated by high-performance liquid chromatographic assay with dansyl chloride as a fluorescent derivative reagent. Dansyl derivatives with fluorescent intensity are detected at an excitation wavelength of 370 nm and an emission wavelength of 506 nm. Retention times of 1-ADA, 2-ADA, MEM, and RIM derivatives are 12.2, 12.2, 15.2, and 16.6 min, respectively. The peak of 1-ADA derivative coelutes with the 2-ADA derivative. The limits of detection for 1-ADA, 2-ADA, MEM, and RIM are 0.014, 0.007, 0.012, and 0.020microM, respectively (signal-to-noise ratio of 3:1). In the intra- and interday assay, the range of standard deviation to the average of 1-ADA, 2-ADA, MEM, and RIM is 4.6-12.7%. Their recovery is also good. The ranking order for synthetic melanin binding among these compounds is RIM > MEM > 2-ADA = 1-ADA. The method is simple, sensitive, and reproducible for simultaneously measuring 1-ADA or 2-ADA, MEM, and RIM. Also, it is useful to investigate their binding kinetics to melanin.     

Polymerizability of unsaturated monomers capable of forming stable radicals

Some unsaturated monomers bearing hindered phenol and arylamine groups capable of forming stable radicals were prepared. Radical polymerizations of vinyl monomers having such groups were investigated with the use of azobisisobutyronitrile, benzoyl peroxide, cumene hydroperoxide, and tetraethylthiuram disulfide as initiator. Polymerizations of these monomers went normally only when azobisisobutyronitrile was used as initiator. The other initiators inhibited polymerizations remarkably or completely. The results suggest that radicals resulting from benzoyl peroxide and cumene hydroperoxide or tetraethylthiuram disulfide abstract hydrogen of the phenol or the amine to produce the stable radicals, thereby inhibiting the polymerization. Meanwhile, carbon radicals resulting from azobisisobutyronitrile add selectively to the vinyl double bonds of the monomers to initiate the polymerizations. The vinyl derivatives as well as allyl derivatives and cinnamic acid derivatives copolymerize easily with conventional monomers such as styrene, maleic anhydride, and butadiene, again, only when azobisisobutyronitrile was used as initiator. Antioxidative properties for styrene copolymers and butadiene-styrene copolymers incorporating the hindered phenol monomers were investigated.     

Removal of the impurities from environmental water samples for tritium measurement by liquid scintillation counting

Liquid scintillation counting is the most popular method for tritium measurement, however, it takes much time and a lot of doing to distill off the impurities before mixing the sample water and liquid scintillation cocktail. We have investigated the possibility of an alternative method to the distillation. We have found out that the filtration can be an alternative to distillation for the environmental water samples before electrolytic enrichment.     

Pre-concentration of traces of tin by coprecipitation with yttrium hydroxide for electrothermal atomisation atomic absorption spectrometry

Summary Trace amounts of tin were concentrated by coprecipitation and determined by electrothermal atomisation atomic absorption spectrometry. Yttrium hydroxide coprecipitated quantitatively 0.1–3 g of tin from 50–500 ml of sample solution at pH 9.5–11.2. The atomic absorbance of tin increased about twice by using an impregnated graphite tube with yttrium. The impregnated graphite tube, furthermore, improved the reproducibility of the measurement of tin. A linear calibration graph was obtained in the range of 0.004–0.12 g/ml of tin. Twenty-three foreign ions did not interfere seriously. The method was applicable to the determination of tin in zinc metal.