Neutron activation analysis of iodine in soil

A simple pre-irradiation procedure for the separation of iodine from soil has been developed. A soil sample was heated in a quartz tube for 15 min at about 900 °C. The evaporated iodine was collected in activated charcoal, which was produced from phenol resin with low impurities. The charcoal, with sorbed iodine, was irradiated by neutrons and the¹²⁸I produced was measured. A successful elimination of the background radioactivity due to the matrix elements was possible with this separation procedure. The detection limit by this method for soil samples was about 0.1 mg/kg (dry). The method has been applied to analyze selected soil samples.     

Carbonyl allylations by 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide

2-Propenyl tin species, prepared from 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide in dichloromethane, causes nucleophilic addition to aldehydes to produce the corresponding homoallylic alcohols.     

Hydrogel‐like elastic membrane consisting of semi‐interpenetrating polymer networks based on a phosphorylcholine polymer and a segmented polyurethane

To obtain a hydrogel‐like elastic membrane, we prepared semi‐interpenetrating polymer networks (IPNs) by the radical polymerization of methacrylates such as 2‐methacryloyloxyethyl phosphorylcholine (MPC), 2‐hydroxyethylmethacrylate, and triethyleneglycol dimethacrylate diffused into segmented polyurethane (SPU) membranes swollen with a monomer mixture. The values of Young's modulus for the hydrated semi‐IPN membranes were less than that for an SPU membrane because of higher hydration, but they were much higher than that for a hydrated MPC polymer gel (non‐SPU). According to a thermal analysis, the MPC polymer influenced the segment association of SPU. The diffusion coefficient of 8‐anilino‐1‐naphthalenesulfonic acid sodium salt from the semi‐IPN membrane could be controlled with different MPC unit concentrations in the membrane, and it was about 7 × 10² times higher than that of the SPU membrane. Fibroblast cell adhesion on the semi‐IPN membrane was effectively reduced by the MPC units. We concluded that semi‐IPNs composed of the MPC polymer and SPU may be novel polymer materials possessing attractive mechanical, diffusive‐release, and nonbiofouling properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 68–75, 2003     

Affine scaling algorithm fails for semidefinite programming

In this paper, we introduce an affine scaling algorithm for semidefinite programming (SDP), and give an example of a semidefinite program such that the affine scaling algorithm converges to a non-optimal point. Both our program and its dual have interior feasible solutions and unique optimal solutions which satisfy strict complementarity, and they are non-degenerate everywhere.     

Second-order necessary optimality conditions for domain optimization problems of the Neumann type

In this paper, we treat a domain optimization problem in which the boundary-value problem is a Neumann problem. In the case where the domain is in a three-dimensional Euclidean space, the first-order and the second-order necessary conditions which the optimal domain must satisfy are derived under a constraint which is the generalization of the requisite of constant volume.Portions of this paper were presented at the 13th IFIP Conference on System Modelling and Optimization, Tokyo, Japan, 1987.     

Tris(1‐ethyl‐3‐methyl­imidazolium) hexa­chloro­lanthanate

In the title complex, (C₆H₁₁N₂)₃[LaCl₆], centrosymmetric octahedral hexa­chloro­lanthanate anions are located at the corners and face‐centers of the monoclinic unit cell. The ring H atoms of the cations interact with the Cl atoms of the anions via hydrogen bonding, and bifurcation of the hydrogen bonding is observed. Cation–cation interactions via hydrogen bonding between the ring H atoms and π‐electrons of aromatic rings are also observed as in other imidazolium salts.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Determination of129I and127I in environmental samples by neutron activation analysis (NAA) and inductively coupled plasma mass spectrometry (ICP-MS)

In order to assess the levels and behavior of¹²⁹I (half-life: 1.6×10⁷ y) and¹²⁷I (stable) in the environment, we have developed analytical procedures involving neutron activation analysis (NAA). Environmental samples collected around Tokaimura, Ibaraki Prefecture, Japan, have been analyzed using this method. Ranges of¹²⁹I and¹²⁷I concentrations in surface soil were 0.9–180 mBq kg^–1 and 1–60 mg kg^–1, respectively. Higher¹²⁹I concentrations were found in soil samples collected from coniferous forests, suggesting a contribution from tree canopies in the deposition of this nuclide. Most of the¹²⁹I in soil, was found to be retained in the first 10 cm. The¹²⁹I/¹²⁷I ratios in wheat fields were lower than those in rice paddy fields.A soil sample collected by IAEA from an area contaminated by the Chemobyl accident was also determined. The¹²⁹I concentration and the¹²⁹I/¹²⁷I ratio were 1.6 mBq kg^–1 and 1.7×10^–7, respectively. The¹²⁹I level in this sample was higher than the values obtained in areas far from nuclear facilities in Japan. It was suggested that the analysis of¹²⁹I in soils in the Chernobyl area may be useful in evaluating the¹³¹I levels at the time of the accident.Analyses of¹²⁹I and¹²⁷I by ICP-MS in water samples were also made. The analytical speed of this method was very high, i.e., 3 minutes for a sample. However, there is a sensitivity limitation for¹²⁹I detection due to interference from¹²⁹Xe with the¹²⁹I peak. The detection limits for¹²⁹I and¹²⁷I in water samples were about 0.5 mBq ml^–1 and 0.1 ng ml^–1, respectively.     

Neutron activation analysis of iodine-129 and iodine-127 in environmental samples

The possibilities of reactor induced (n, p) reactions as a tool for neutron activation analysis of titanium in geological samples are discussed. The interference of calcium and scandium is experimentally evaluated. Results for Ti, Ca and Sc in GSP-1 and PCC-1 standard rocks are presented. On the basis of the experimental values, it is concluded that the⁴⁷Ti(n, p)⁴⁷Sc reaction is the most favourable for titanium determination.