UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

Comparison of Py*+/dU*- charge transfer state dynamics in 5-(1-pyrenyl)-2'-deoxyuridine nucleoside conjugates with amido-, ethylenyl-, and ethynyl linkers

Femtosecond, picosecond, and nanosecond transient absorbance (TA) and picosecond emission kinetics results are presented for three 5-(1-pyrenyl)-2'-deoxyuridine nucleosides each with a different two-atom linker joining pyrenyl C-1 to uracil C-5. The linkers are respectively -NHCO-, -(CH(2))(2)-, and -C[triple bond]C- for PAdU, PEdU, and PYdU. For all three nucleoside conjugates, most conformers undergo intramolecular charge transfer (CT) from their pyrenyl (1)(pi,pi) excited states to form Py(*+)/dU(*-) CT products in ultrashort times: 相似文献   

Synthesis of imidazoles as novel emivirine and S‐DABO analogues

5‐Alkyl‐4‐benzyl‐1,3‐dihydroimidazol‐2‐ones ( 3a‐d ) and 5‐alkyl‐4‐benzyl‐1,3‐dihydroimidazole‐2‐thiones (7a‐d) were prepared via Dakin West reaction on DL‐phenylalanine with the appropriate aliphatic acid anhydrides followed by hydrolysis and reaction with potassium cyanate or potassium thiocyanate. Compounds 3a‐d were alkylated with ethoxymethyl chloride to give the alkylated imidazoles 5a‐d which were considered analogues of Emivirine with deletion of carbonyl group at the 4‐position. Alkylation of 7a‐d afforded the corresponding S‐alkylated derivatives 8a‐p which in a similar way were considered analogues of S‐DABO. However all the imidazole derivatives were devoid of activity against HIV.     

Oxidations with alkaline permanganate using monovalent thallium for the back-titration: Determination of iodate,iodide and ferrocyanide

Iodate, iodide, iodine and ferrocyanide can be estimated by oxidation with KmnO₄ in alkaline media; the excess is back-titrated with TI⁷. I^- and I₂ are oxidized to IO₄^- in the presence of Ba⁺² ions but only to IO₃^- in absence of such ions. The direct titration of IO₃^-, I^- with KmnO₄ proved valueless.Ferrocyanide is oxidized by KmnO₄ in alkaline solutions and MnO₂ is formed. In the presence of telluric acid and 0.025–0.1 N NaOH satisfactory results are obtained. Reduction of MnO₄^- with ferrocyanide gives MnO₄^-2 and the results are variable, depending on the rate of adding the ferrocyanide.     

Adsorption of phenanthrene on organoclays from distilled and saline water

Isotherms of phenanthrene adsorption on different organoclay complexes were obtained using the HPLC technique to understand the adsorption behavior and to characterize the effect of sodium chloride (NaCl) on the adsorption. The adsorbed amounts of phenanthrene on montmorillonite exchanged by organic cations such as tetraheptylammonium, benzyltrimethylammonium, hexadecyltrimethylammonium, or tetraphenylphosphonium were several times higher than those obtained using montmorillonite clay without surface modification. At the same equilibrium concentration, the adsorbed amount of phenanthrene is higher on clay modified with benzyltrimethylammonium than on clay modified with hexadecyltrimethylammonium or other cations. Adsorption of phenanthrene on clay modified with benzyltrimethylammonium increased dramatically as the concentration of NaCl increased up to 150 g/l in the aqueous solution. The shape of the curves obtained can be classified as S-type. The adsorption data obtained from salinity experiments support a mathematical model that links the Langmuir constant with the salinity constant. This model may be useful to predict the equilibrium concentration of a contaminant in saline solution. FTIR studies showed strong interactions between the aromatic rings of phenanthrene and the preadsorbed benzyltrimethylammonium on clay surfaces.     

Dosimetric investigations on radiation-induced Ag nanoparticles in a gel dosimeter

Journal of Radioanalytical and Nuclear Chemistry - Radiation-induced Ag° nanoparticles (NPs) in silver nitrate gel dosimeter incorporating various components was investigated in the dose range...     

Comparative study between two fabricated potentiometric sensors to enhance selectivity towards ferrous ions

Electroanalytical methods are highly selective for measuring electrical quantities including the charge, potential and current with their relation to chemical parameters. They are widely applied in various fields such as biochemical analysis, industrial quality control and environmental monitoring. They have many advantages over other techniques in that they are not time consuming and are specific for certain oxidation states of certain elements which give these techniques high selectivity and sensitivity features. This paper is based on two parts: the first part describes the fabrication of screen‐printed electrodes (SPEs) modified with methyl red as electroactive material, while second part describes the preparation and characterization of Fe(II)–methyl red complex using various spectroscopic tools, the complex being used for the construction of carbon paste electrodes (CPEs). The two proposed electrodes were successfully applied for the determination of Fe(II) in water and pharmaceutical (pharovit) samples. The electrodes under investigation show potentiometric response for Fe(II) in the concentration range 8.0 × 10^?7–1.0 × 10^?2 and 5.0 × 10^?7–1.0 × 10^?2 M at 25°C for SPE and CPE, respectively, and the electrode response is independent of pH in the range 1.5–7.0. These sensors show Nernstian slopes of 29.1 ± 0.2 and 29.7 ± 0.16 mV decade^?1 with detection limit values of 8.0 × 10^?7 and 5.0 × 10^?7 M for SPE and CPE, respectively. These electrodes show fast response time of 6 and 4 s and exhibit a lifetime of 100 and 30 days for SPE and CPE, respectively. The mechanism of chemical reaction between modifier and Fe(II) on the SPE surface was studied using infrared spectra, scanning electron microscopy and energy‐dispersive X‐ray analysis. The proposed potentiometric method was validated according to the IUPAC recommendations. The results obtained using the proposed sensors were comparable with those obtained with inductively coupled plasma analysis.     

The role of hydrogen bonds in thermodynamic and structural properties in binary mixtures of morpholine + 2-methylcyclohexanol: a combined experimental and computational study

Structural Chemistry - Thermodynamic properties of binary mixtures of 2-methylcyclohexanol with morpholine are measured as a function of composition and temperature. The excess molar volumes were...