Pd-Rh型国Ⅲ排放三效催化剂的研制

对满足欧Ⅲ排放限值的Pd-Rh型三效催化剂进行研究开发,测试了新鲜催化剂的空燃比特性和起燃温度特性,并与市场上的欧Ⅲ催化剂在同等条件下老化后的性能进行了比较.对研制的催化剂进行封装总成后,按照GB18352.3-2005标准进行了常温冷起动Ⅰ型和低温冷起动IV型试验,测试结果完全能满足该标准的限值要求.     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

Synthesis of fluorescent dendritic 8-hydroxyquinoline ligands and investigation on their coordinated Zn(II) complexes

A series of luminescent PAMAM dendrons emanating from 8-hydroxyquinoline have been synthesized and their coordination with Zn(II) was investigated for the first time. The obtained dendritic Zn(II) complexes were soluble in common organic solvents. It was found that the luminescence intensity of G2 dendron 6 was higher than that of G1 dendron 4. Furthermore, when they were coordinated with Zn(II), red-shift was observed and the intensities of the coordinated Zn(II) complexes were higher than that of the corresponding ligands.     

In situ formation of a biomimetic lipid membrane triggered by an aggregation-enhanced photoligation chemistry

Nature or synthetic systems that can self-assemble into biomimetic membranes and form compartments in aqueous solution have received extensive attention. However, these systems often have the problems of requiring complex processes or lacking of control in simulating lipid synthesis and membrane formation of cells. This paper demonstrates a conceptually new strategy that uses a photoligation chemistry to convert nonmembrane molecules to yield liposomes. Lysosphingomyelin (Lyso) and 2-nitrobenzyl alcohol derivatives (NBs) are used as precursors and the amphiphilic character of Lyso promotes the formation of mixed aggregates with NBs, bringing the lipid precursors into close proximity. Light irradiation triggers the conversion of NBs into reactive aldehyde intermediates, and the preassembly facilitates the efficient and specific ligation between aldehyde and Lyso amine over other biomolecules, thereby accelerating the synthesis of phospholipids and forming membrane compartments similar to natural lipids. The light-controllable transformation represents the use of an external energy stimulus to form a biomimetic phospholipid membrane, which has a wide range of applications in medicinal chemistry, synthetic biological and abiogenesis.

A photoligation chemistry was used to drive the formation of biomimetic membranes in situ. The preassembly of precursors promotes the synthesis of lipid, which is an important feature as a candidate for simulating natural membrane functions.     

液相外延制备InGaAsP/InP掩埋异质结若干工艺问题的讨论

本文对InGaAsP/InP(DC-PBH)激光器掩埋异质结液相外延生长中的几个关键工艺问题进行了研究,提出了获得有利于沟道掩埋生长的理想沟道几何图形的新的腐蚀配方(Br_2/HBr),对二次外延再生长光刻腐蚀面损伤层和有害杂质的去除采用了阳极氧化工艺,同时探索了利用二次外延过程中Zn扩散来控制限制层(3)掺杂的新方法,在研究基础上制造了重现性好且性能良好的1.3μm激光二极管,室温时,阈值电流最低小于25mA,典型值为30mA,在60mA直流电流的驱动下,光输出功率高达12.5mW.     

Robust cellulose-carbon nanotube conductive fibers for electrical heating and humidity sensing

Multifunctional fibers have attracted widespread attention due to applications in flexible smart wearable devices. However, simultaneously obtaining a strong and functional woven fiber is still a great challenge owing to the conflict between the properties mentioned above. Herein, mechanically strong and highly conductive cellulose/carbon nanotube (CNT) composite fibers were spun using an aqueous alkaline/urea solution. The microstructure as well as physical properties of the resulting fibers were characterized via scanning electron microscopy, infrared spectroscopy, mechanical and electrical measurement. We demonstrated that carboxylic CNTs can be well dispersed in alkali/urea aqueous systems which also dissolved cellulose well. The subsequent wet spinning process aligned the CNTs and cellulose molecules inside the regenerated composite fiber well, enhancing the interaction between these two components and endowing the composite fiber having a 20% CNT loading with an excellent mechanical strength of 185 MPa. Benefiting from the formation of conductive paths, the composite fiber with the diameter of about 50 μm possessed an electrical conductivity value in the range of 64–1274 S/m for 5–20 wt% CNT loading. This excellent mechanical strength and high electrical conductivity enable the composite fiber to exhibit a great potential in joule heating; the heating temperature of cellulose/CNT-20 fiber reached more than 55 °C within 15 s at 9 V. In addition, the multifunctional filaments are further manufactured as a water sensor to measure humidity. This work provides a potential material that can be applied in the fields of wearable electronics and smart flexible fabrics.

Graphic abstract

     

侧槽的拘束作用及对断裂韧性参量的影响

本文研究了侧槽对预制疲劳裂纹Ｃｈａｒｐｙ尺寸试样的拘束效应以及其对断裂韧性参量的影响。当侧槽深度大于临界值时，峰值载荷韧性Ｊｍ值与起裂韧性Ｊ１值基本相等。侧槽对试样的加厚作用可用试样的附加厚度表示，对于同样的侧槽深度，不同材料具有不等的附加厚度，试样取得最大附加厚度的侧槽深度为３３％。文中提出用拘束系数定量地估计侧槽对裂纹尖端的塑性拘束作用，能较好地解解放本试验结果。     

Molecular engineering tuning optoelectronic properties of thieno[3,2-<Emphasis Type="Italic">b</Emphasis>]thiophenes-based electrochromic polymers

Thieno[3,2-b]thiophene (TT) monomers end-capped with 3,4-ethylenedioxythiophene (EDOT) moieties are electropolymerized to form π-conjugated polymers with distinct electrochromic (EC) properties. Steric and electronic factors (electron donor and acceptor substituents) in the side groups of the TT core, as well as the structure of the polymer backbone strongly affect the electrochemical and optical properties of the polymers and their electrochromic characteristics. The studied polymers show low oxidation potentials, tunable from–0.78 to +0.30 V (vs. Fc/Fc⁺) and the band gaps from 1.46 to 1.92 eV and demonstrate wide variety of color palettes in polymer films in different states, finely tunable by structural variations in the polymer backbone and the side chains. EC materials of different colors in their doped/dedoped states have been developed (violet, deep blue, light blue, green, brown, purple-red, pinkish-red, orange-red, light gray, cyan and colorless transparent). High optical contrast (up to 79%), short response time (0.57–0.80 s), good cycling stability (up to 91% at 2000 cycles) and high coloration efficiency (up to 234.6 cm² C^–1) have been demonstrated and the influence of different factors on the above parameters of EC polymers have been discussed.     

Fragmentation patterns of novel dithiocarbamate derivatives with pharmaceutical activity under electrospray ionization tandem mass spectrometry conditions

The fragmentation patterns of a novel series of dithiocarbamate derivatives with pharmaceutical activity were investigated by positive ion electrospray ionization mass spectrometry in conjunction with tandem mass spectrometry (ESI-MS(n)). In the gas phase, the dithiocarbamate protonated molecules containing the piperazinium moiety undergo losses of bromide to form the piperazinium cation by ionization, followed by subsequent losses of methyl bromide, ring opening and rearrangement of piperazinium. Furthermore, the dithiocarbamate derivatives and their intermediates both undergo cleavage of the C-S bond to produce two common fragment ions. The different fragmentation observed for these compounds facilitated their identification and could be valuable in the further study of their metabolic pathways as prodrugs.     

检测/校准实验室仪器设备及标准物质期间核查实施方法

对检测/校准实验室仪器设备及标准物质期间核查的具体实施进行了讨论,重点介绍编写期间核查作业指导书需明确的内容,包括明确核查对象、确定核查项目、选择核查方法、规定核查间隔、获取核查判据及如何判定对核查不合格的处置.指出既能利用期间核查确保仪器设备及标准物质的可靠性,又不浪费人力物力的措施.