Formation of Azulene-Embedded Nanographene: Naphthalene to Azulene Rearrangement During the Scholl Reaction

Incorporation of a non-hexagonal ring into a nanographene framework can lead to new electronic properties. During the attempted synthesis of naphthalene-bridged double [6]helicene and heptagon-containing nanographene by the Scholl reaction, an unexpected azulene-embedded nanographene and its triflyloxylated product were obtained, as confirmed by X-ray crystallographic analysis and 2D NMR spectroscopy. A 5/7/7/5 ring-fused substructure containing two formal azulene units is formed, but only one of them shows an azulene-like electronic structure. The formation of this unique structure is explained by arenium ion mediated 1,2-phenyl migration and a naphthalene to azulene rearrangement reaction according to an in-silico study. This report represents the first experimental example of the thermodynamically unfavorable naphthalene to azulene rearrangement and may lead to new azulene-based molecular materials.     

A high-speed high-sensitivity acoustic cell for in-line continuous monitoring of MOCVD precursor gases

We describe a continuous wave resonant acoustic sensor that has been optimized as a very sensitive in-line monitor for measuring the composition of precursor gases used in MOCVD processes. The precursor/carrier gas mixtures flow through a compact stainless steel acoustic chamber that is isolated from the acoustic transducers by a set of metallic diaphragms. The sensor has been successfully operated at supply line pressures from atmosphere down to 50 Torr with gas flow rates of up to 1600 sccm. The accuracy of the speed of sound measurement for hydrogen gas is better than 0.005%, even in a high noise and low pressure environment. Hydrogen, as well as nitrogen or argon carrier gases, are accommodated within the instrument's 1–5 kHz working frequency range. The instrument's sensitivity and stability are demonstrated with the laboratory data. Measurements of the dynamic response characteristics of the metalorganic bubbler lines at low pressure are also be presented. Application of the cell is general, encompassing any of the metalorganic and hydride materials typically used in MOCVD processes.     

新型纤维素衍生物手性固定相的制备及其对几种对映异构体的高效液相色谱分离

合成了一种经环十二烷修饰的纤维素酯，将其涂敷于小粒径的氨丙基化硅胶（APS）上，制备出高效液相色谱手性固定相，以正己烷、异丙醇为流动相拆分了2-对氯苯基丙腈、1-对氟苯基乙醇、1-对叔丁基苯氧基-2-丙醇、2-对氯苯基辛腈及三唑醇等5种外消旋对映体，并考察了流动相中异丙醇含量对分离效果的影响。     

季铵盐用于示波极谱滴定法测定培氟沙星和环丙沙星

介绍采用季铵盐 十六烷基三甲基溴化铵作滴定剂的示波极谱滴定法测定培氟沙星和环丙沙星含量的方法。在pH 4 .8HAc NaAc缓冲溶液中 ,培氟沙星和环丙沙星均能与四苯硼钠 (Na TPB)作用生成沉淀 ,干过滤后 ,用十六烷基三甲基溴化铵标准溶液代替在示波极谱滴定法中常用的有毒硫酸亚铊作为滴定剂 ,回滴滤液中过量的Na TPB ,由示波极谱图 [dE dt=f(E)曲线 ]上TPB的切口消失指示终点。本法终点直观、灵敏 ,操作简便、快速 ,应用于多批原料药样品的测定 ,均获得满意的结果 ,其回收率在 99.9%～ 10 0 .3%之间 ,最大相对误差 <± 0 .3% ,与非水滴定法测得结果基本吻合。     

CuCrAl和CuCrZr低温液相合成甲醇催化剂的研究

 用络合共沉淀法制备了CuCrAl和CuCrZr复合氧化物液相合成甲醇催化剂，其比表面分别达到119和116m2／g．在5．0～5．5MPa和383K条件下，分别用间歇式和流动式反应釜考察了催化剂的活性和稳定性．结果表明：CuCrAl和CuCrZr的活性均明显高于CuCr；CuCrAl的活性略高于CuCrZr，但甲酸甲酯（MF）的选择性明显低于CuCrZr；两者在12h内未见活性明显下降．甲醇钠在反应过程中部分转化为甲酸钠和NaOH．CuCrAl和CuCrZr有较高的氢解活性可抑制甲醇钠与MF生成甲酸钠，从而有较低的甲酸钠浓度．但是，Al2O3和ZrO2的酸性有利于甲醇脱水，引起甲醇钠水解生成NaOH．溶剂对CuCr基催化剂的活性和选择性有明显影响．对反应机理进行了讨论．     

Preparative SEC column packed with microporous particles prepared from cellulose

New microporous particles with large pore size (mean pore diameter of 820 nm) are successfully prepared from a mixture of cellulose and konjac glucomannan (RC-KGM3) in 1.5 M NaOH-0.65 M thiourea aqueous solution by coagulating with 5 weight percentage (wt%) CaCl(2), and then 2 wt% HCl aqueous solution. A preparative size-exclusion chromatographic (SEC) column packed with the gel particles is used for the fractionation of a dextran in water. The exclusion limit and fractionation range of the stationary phase are molecular masses of 125 yen 104 g/mol and 5.6 yen 104 to 125 yen 104 g/mol, respectively. The dextran [dextran 50, weight-average molecular mass (M(w)) = 40.1 yen 104 g/mol, polydispersity index (d) = 3.5] is fractionated by the preparative SEC column to obtain six fractions, and four of them are refractionated twice by the same preparative SEC column. The refractionated samples F-3-3 and F-4-3 are characterized by analytical SEC combined with laser light scattering and light scattering to obtain M(w) of 91.8 and 61.9 yen 104 g/mol, as well as d of 1.3 and 1.4, respectively. The results indicate that the fractions having narrow molecular mass distribution are satisfactorily prepared with the SEC column. The described SEC column can be successfully used to fractionate polymers in aqueous solution.     

Thermal decomposition of poly(butylene terephthalate)

Detailed results of the overall thermal degradation of poly(butylene terephthalate) are reported. Laser microprobe analysis and dynamic mass spectrometric techniques were used to identify the primary volatile degradation products and initial pyrolysis reactions that control polymer degradation. A complex multistage decomposition mechanism was observed which involves two major reaction pathways. Initial degradation occurs by an ionic decomposition process that results in the evolution of tetrahydrofuran. This is followed by concerted ester pyrolysis reactions that involve an intermediate cyclic transition state and yield 1,3-butadiene. Simultaneous decarboxylation reactions occur in both decomposition regimes. Finally, the latter stages of polymer decomposition were characterized by evolution of CO and complex aromatic species such as toluene, benzoic acid, and terephthalic acid. Activation energies of formation for the main pyrolysis products were determined from the dynamic measurements of the major ion species and indicate values of E = 27.9 kcal/mole for the production of tetrahydrofuran and E = 49.7 kcal/mole for the production of butadiene.