锂离子电池用多孔硅/石墨/碳复合负极材料的研究

在两步高能球磨和酸蚀条件下制得了多孔硅/石墨复合材料，并对其进行碳包覆制成多孔硅/石墨/碳复合材料。通过TEM，SEM等测试手段研究了多孔硅材料的结构。作为锂离子电池负极材料，电化学测试结果表明多孔硅/石墨/碳复合材料相比纳米硅/石墨/碳复合材料有更好的循环稳定性。同时，改变复合体配比、热解碳前驱物、粘结剂种类和用量也会对材料的电化学性能产生较大的影响。其中使用质量分数为10％的LA132粘结剂的电极200次循环以后充电容量保持在649.9 mAh·g^-1，几乎没有衰减。良好的电化学性能主要归因于主活性体-多孔硅颗粒中的纳米孔隙很好地抑制了嵌锂过程中自身的体积膨胀，而且亚微米石墨颗粒和碳的复合也减轻了电极材料的体积效应并改善了其导电性。     

利用高阶拉盖尔-高斯横模精确测量法布里-珀罗腔内原子的运动轨迹

研究了冷原子与法布里-珀罗腔内拉盖尔-高斯横模强耦合相互作用体系的透射光谱, 分析了透射光谱与原子在腔中运动轨迹的关系. 结果表明, 与厄米特-高斯横模相比, 拉盖尔-高斯横模的腔场与原子的最大耦合系数几乎不随阶数的增加而变化, 使得探测光谱的对比度受模式阶数的影响较小. 在拉盖尔-高斯横模场分布的圆环边缘附近, 原子运动轨迹的微小偏移会引起透射光谱的很大变化, 因此在这些位置可以实现原子运动轨迹的高精度探测.     

Synthesis and Crystal Structure of Zn(Ⅱ) Complex with 2-Aminopyridine and Acetylacetone

A mixed complex [Zn(C5H6N2)(HL)2] (C5H6N2 = 2-aminopyridine, H2L = acetyl- acetone) has been synthesized and characterized by IR, elemental analysis and X-ray single-crystal diffraction analysis. The crystal belongs to monoclinic, space group P21/c with a = 7.4490(15), b = 8.2650(17), c = 27.615(6)(A),β = 101.69(3)°, V = 1664.9(6)(A)3, Z = 4, Mr = 357.70, Dc = 1.427 g/cm3, F(000) = 744, μ = 1.493 mm-1, R = 0.0309 and wR = 0.0771. The Zn(II) is coordinated by one nitrogen atom from 2-aminopyridine and four oxygen atoms from two acetylacetone anions to furnish a distorted square pyramid geometry. The complex forms a three-dimensional network through intermolecular hydrogen bonds.     

Synthesis, Structure and Photoluminescence of a New Cd(Ⅱ)Coordination Polymer Based on 4-(Carboxymethoxy)-benzoic Acid and 1,10-Phenanthroline Derivative

A new 1D coordination polymer, [Cd2(L1)2(L2)2]·H2O (1, H2L1 = 4-(carboxy-methoxy)benzoic acid and L2 = 2-(4-fluorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), has been hydrothermally synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. It crystallizes in triclinic, space group Pī with a = 9.985(5), b = 10.768(5), c = 12.512(5), α = 68.959(5), β = 80.354(5), γ = 79.663(5)°, V = 1227.4(10) 3, Z = 1, C56H36Cd2F2N8O11, Mr = 1259.73, Dc = 1.704 g/cm3, F(000) = 630, μ(MoKa) = 0.949 mm-1, R = 0.0261 and wR = 0.0655. The L1 anions link the neighboring Cd(II) atoms to form a 1D double chain structure. The L2 ligands are alternately located on both sides of the double chains. More interestingly, the lateral L2 ligands from adjacent double chains are paired to furnish strong π-π interactions, yielding a 2D supramolecular layer. N-H···O, O-H···N and O-H···O hydrogen bonds further stabilize the structure of 1. The luminescent property of 1 was studied in solid state at room temperature.     

可充镁电池正极材料PTMA/石墨烯

本文制备了聚4-甲基丙烯酸-2,2,6,6-四甲基哌啶-1-氮氧自由基酯(PTMA)/石墨烯纳米复合材料,并报道了其作为可充镁电池正极材料的电化学性能.通过傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)、透射电镜(TEM)表征复合材料的结构和形貌;循环伏安和恒电流充放电测试其电化学性能.粒径10 nm左右的PTMA颗粒分散在具有导电作用的石墨烯表面;在"一代"电解液Mg(AlCl2BuEt)2/四氢呋喃(THF)(0.25 mol L-1)中,22.8mA g-1充放电电流密度下,PTMA/石墨烯复合材料的起始放电容量可达到81.2 mAh g-1.研究结果表明,含有自由基的有机化合物可以作为可充镁电池的一类新型正极材料,可以进一步通过使用具有高氧化分解电压的电解液来提高其放电容量.     

LiNi0.5Mn1.5O4-xFx高电压电极高温保存下的电化学行为

采用溶胶-凝胶法结合高温热处理制备了锂离子电池用5 V正极材料LiNi0.5Mn1.5O4-xFx(x=0, 0.1). 通过X射线衍射(XRD)、扫描电子显微镜(SEM)和低温氮吸附法(BET)表征了粉体材料的结构、表面形貌和比表面特性, 并以其为正极材料装配电池后, 在85 ℃下高温保存24 h, 测量了保存前后电池的一系列电化学性质变化. 结果表明, 高温保存时电池开路电压会因自放电而较快地下降. 材料的比表面积和氟掺杂显著地影响电池的电压保持能力. 比表面积愈大, 电压保持时间愈短. 氟掺杂有利于提高电池在高温条件下的电压稳定性, 并可以改善电极与电解液之间的界面性质,使充放电性能更好.     

Asymmetric Coupling in Two-Lane Asymmetric Simple Exclusion Processes with Unequal Injection Rates: Effect of Different Hoping Rates

This paper investigates the effect of both unequal injection rates and different hopping rates on two-lane asymmetric simple exclusion processes(ASEPs) with asymmetric coupling. When the hopping rates of both lanes are different, the system includes six steady phases, however, when the hopping rates of both lanes are same, the seventh phase(MC, MC) will exist in the system. Interestingly, with different hopping rates of both lanes, the densities of the system cannot be influenced by the non-zero vertical transition rate. Our theoretical arguments are in well agreement with extensively performed Monte Carlo simulations.     

Syntheses,Crystal Structures and Properties of Two New Transition-Metal-Centered Heteropolytungstates

Two one-dimensional transition-metal-centered polyoxotungstates, that is, [Cu(en)₂][Cu(en)₂(H₂O)][Cu(en)(phen)][CuW₁₂O₄₀]·3H₂O (1) (en = ethylenediamine, phen = phenanthroline) and [Cu(en)₂]₂[Cu(en)₂(H₂O)]₂[V_5.8W_7.2O₄₀(VO)₄]·3H₂O (2) have been synthesized hydrothermally and structurally characterized by elemental analyses, IR spectroscopy, electrochemical analysis, thermogravimetric analysis and X-ray single crystal diffraction. Single-crystal structural analysis reveals that both of them represent one-dimensional structures constructed from transition-metal-centered Keggin-type polyanions bridged by secondary metal coordination groups of Cu-ligand. Noticeably, compound 1 exhibits a helical chain-liked structure, and the anion is coordinated by three Cu-ligand units, representing a copper-centered and tri-supported Keggin structure. In compound 2, the polyoxoanion [V_5.8W_7.2O₄₀(VO)₄]⁸⁻ represents a V-centered tetra-capped pseudo-Keggin structure, and is coordinated by four Cu-ligand units. The three-dimensional supramolecular structures of compounds 1 and 2 are constructed through intermolecular hydrogen bonding interactions. The electrochemical and thermalstable properties of 1 and 2 are also studied. The results show the redox properties of polyoxotungstates are retained in title polymers.     

吡唑基镁卤化物/四氢呋喃可充镁电池电解液

将不同配比的吡唑与格氏试剂反应制得的吡唑基镁卤化物/四氢呋喃（THF）溶液用作可充镁电池电解液,采用循环伏安和恒电流充放电测试研究了该电解液的镁沉积-溶出性能和氧化分解电位;并通过X射线衍射（XRD）和扫描电镜（SEM）对沉积物的组分和形貌进行了分析. 结果表明,吡唑上的取代基、吡唑与格氏试剂的反应配比对电解液的电化学性能都有影响. 1 mol·L^-1 1-甲基吡唑-PhMgCl（1：1摩尔比）/THF反应配制的电解液在不锈钢（SS）集流体的阳极氧化分解电位达到2.4 V（vs Mg/Mg²⁺）,并具有镁沉积-溶出电位低、循环稳定性高、配制方便的特点,有希望应用于实际的可充镁电池体系中.     

Preparation of Spinel LiMn2O4 by a Spray-drying Method

Spinel LiMn₂O₄ has already become an attractive cathode material for rechargeable lithium-ion battery. Compared with other layered compounds LiCoO₂ and LiNiO₂,LiMn₂O₄ offers several advantages:inexpensive, nontoxic, abundant and easy to prepare. These characteristics induce many researchers to study it to make it commercialized.