Biomimetic design of amphiphilic polycations and surface grafting onto polycarbonate urethane film as effective antibacterial agents with controlled hemocompatibility

The synthetic polycations are ideal candidates as antimicrobial agents, because they resemble natural antimicrobial peptides, but to render hemocompatibility to these materials is a great challenge. Herein, we used 2‐(tert‐butyl‐aminoethyl) methacrylate (TBAEMA), to synthesize its homopolymer and pegylated random and diblock copolymers with polyethyleneglycol methacrylate (PEGMA, M_n = 360 Da) by single‐electron transfer–living radical polymerization (SET‐LRP). In the second step, the secondary amino groups in the precursor polymers were quaternized with iodomethane and bromohexane, to obtain three series of quaternized polymers. The antimicrobial properties of these quaternized polymers were evaluated against Escherichia coli (E. coli), by studying the minimum inhibitory concentrations (MICs) which ranged between 32 and 200 mg L^?1 and showed higher values for the quaternized random than the diblock copolymers. In addition to, we have also demonstrated the grafting of these polycations onto polycarbonate urethane film surfaces, which showed good killing efficacy against E. coli. Furthermore, the hemolysis of these materials was investigated against human red blood cells, which indicated that except the quaternized homopolymers that showed highest hemolysis, all other amphiphilic polycations exhibited very low hemolytic activity. Therefore, our designed materials with controlled structures and functionality, synthesized from cheaply available resources could serve as useful agents in the field of biomedicines and implantable materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3166–3176     

Synthesis of an adhesion‐enhancing polysiloxane containing epoxy groups for addition‐cure silicone light emitting diodes encapsulant

Addition‐cure silicone resin is considered as a good choice for light emitting diodes (LEDs); however, it has very poor adhesion to the substrate, which limits its practical application. A novel polysiloxane with self‐adhesion ability and higher refractive index for the encapsulating of high‐power LEDs is prepared and characterized. This polysiloxane containing vinyl groups, phenyl groups, and epoxy groups was synthesized by a sol‐gel condensation process from methacryloxy propyl trimethoxyl silane, γ‐(2,3‐epoxypropoxy)propytrimethoxysilane, and diphenylsilanediol under the catalysis of an anion exchange resin. Then, the resin‐type encapsulation material was prepared by hydrosilylation of methylphenyl hydrogen‐containing silicone resin and the newly synthesized polysiloxane material. The novel polysiloxane was characterized by ¹H‐NMR and Fourier transform infrared spectroscopy. On the basis of higher refractive index, higher transparency, excellent thermal stability, and appropriate hardness, as well as good adhesive strength between the encapsulating material and the LED lead frame (polyphthalamide), the curable silicone resin‐type encapsulation material can be used as an encapsulant for LEDs. Copyright © 2014 John Wiley & Sons, Ltd.     

低温等离子体引发聚氨酯脲接枝聚氧乙烯和肝素的研究

合成了以4,4’-二环己基甲烷二异氰酸酯（HMDI）和乙二胺（EDA）为硬段、聚碳酸六亚甲基酯二醇（PHC）为软段的聚酯型聚氨酯脲（PUU）,并用聚氧乙烯和肝素（heparin）对其进行了表面改性。通过红外光谱、X射线光电子能谱、接触角等研究了PUU材料的表面结构和性能。实验结果表明,利用室温等离子体方法,成功在PUU...     

Surface modification of polycarbonate urethane by grafting polyethylene glycol and bivalirudin drug for improving hemocompatibility

As the clinical demand for blood-contacting materials increases, higher requirements are placed on their physicochemical properties, durability and hemocompatibility in vivo. In this work, a multiple functionalized material was developed through a facile modification process. Herein, polycarbonate urethane (PCU) surface was co-modified with polyethylene glycol (PEG) and bivalirudin (BVLD). PCU provides excellent physical and mechanical properties, PEG and BVLD, especially BVLD, enable the surface with outstanding anticoagulant capacity. Specifically, PCU surface was first treated with hexamethylene diisocyanate to introduce active isocyanate groups onto the surface, followed by hydroxy-PEG grafting to improve the hydrophilicity. Finally, BVLD was immobilized on the surface via Michael addition reaction to improve antithrombotic properties. Attenuated total reflection Fourier transforms infrared spectroscopy and UV spectrophotometers were used to confirm the modified surfaces. The hydrophilicity was characterized by static water contact angle measurement, the morphology of the modified surfaces was observed by scanning electron microscopy. Blood compatibility of the modified surfaces was characterized by the hemolysis rate, platelet adhesion assay and cell culture test. The results showed that the BVLD immobilized surface has excellent anticoagulant properties, good fibrin-bound thrombin inhibition, and good resistance against non-specific adhesion of proteins. Hence, the co-modification with PEG and BVLD was proved an encouraging strategy for improving hemocompatibility.     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Lipase‐catalyzed ring‐opening polymerization of 6(S)‐methyl‐morpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 6(S)‐methyl‐morpholine‐2,5‐dione (MMD) were investigated. Selected commercial lipases were screened as catalysts for MMD polymerization at 100 °C. Polymerizations catalyzed with 10 wt % porcine pancreatic lipase type II crude (PPL), lipase from Pseudomonas cepacia, and lipase type VII from Candida rugosa resulted in MMD conversions of about 75% in 3 days and in molecular weights ranging from 8200 to 12,100. Poly(6‐methyl‐morpholine‐2,5‐dione) [poly(MMD)] had a carboxylic acid group at one end and a hydroxyl group at the other end. However, lipase from Mucor javanicus showed lower catalytic activity for the polymerization. During the polymerization, racemization of the lactate residue took place. PPL was selected for further studies. The rate of polymerization increased with increasing PPL concentration under otherwise identical conditions. When the PPL concentration was 5 or 10 wt % with respect to MMD, a conversion of about 70% was reached after 6 days or 1 day, respectively, whereas for a PPL concentration of 1 wt %, the conversion was less than 20% even after 6 days. High concentrations of PPL (10 wt %) resulted in high number‐average molecular weights (<3 days); with a lower concentration of PPL, lower molecular weight poly(MMD) was obtained. The concentration of water was an important factor that controlled not only the conversion but also the molecular weight. With increasing water content, enhanced polymerization rates were achieved, whereas the molecular weight of poly(MMD) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3030–3039, 2005     

Synthesis and characterization of biodegradable,amorphous, soft IPNs with shape‐memory effect

Star‐shaped oligo[(D ,L ‐lactide)‐co‐ε‐caprolactone]s (PCLA) with various number average molecular weights were synthesized via ring‐opening polymerization of D ,L ‐lactide (DLLA) and ε‐caprolactone (CL) with organic Sn as catalyst and pentaerythritol as an initiator. The elastic amorphous interpenetrating polymer networks (IPNs) of polyesterurethane/poly(ethylene glycol) dimethacrylate (PEGDMA) were synthesized in situ by UV‐photopolymerization of PEGDMA and thermal polymerization of PCLA with isophorone diisocyanate (IPDI). IPNs are transparent soft materials and the gel content of the IPNs is exceeding 87%. They are rubbery when PEGDMA content is above 10% at room temperature. IPNs show good shape‐memory properties. IPNs recover quickly its permanent form in 10 sec when the environment temperature is above its glass transition temperature (T_g). IPNs have only one single T_g between the T_g of PEGDMA and polyesterurethane. The strain recovery rate (R_r) and the strain fixity rate (R_f) are above 90%. No characteristic peaks of PEG crystallites in X‐ray diffraction pattern (XRD) demonstrate that they are amorphous polymer networks. The wettability, degradation rate, mechanical properties, and T_g of the IPNs could be conveniently adjusted by changing PEGDMA content in IPNs. The soft IPNs are promising suitable as potential soft substrates with tailored mechanical properties for potential clinical or medical use. Copyright © 2011 John Wiley & Sons, Ltd.     

A practical synthesis of β-carbolines by tetra-nbutylammonium bromide (TBAB)-mediated cycloaromatization reaction of aldehydes with tryptophan derivatives

A mild and efficient nBu₄NBr-mediated oxidative cycloaromatization to prepare β-carbolines from readily available tryptophans and aldehydes is described. The reaction is practical and allows the synthesis of β-carbolines on gram-scale. Some of products crystallized from the reaction mixture and were easily removed by filtration, obviating the need for chromatographic separation.     

Synthesis and Characterization of New Block Copolymers with Poly(ethylene oxide) and Poly[3(S)‐sec‐butylmorpholine‐2,5‐dione] Sequences

Four different types of polydepsipeptide‐polyether block copolymers were synthesized via ring‐opening polymerization of 3(S)‐sec‐butylmorpholine‐2,5‐dione (BMD) in the presence of hydroxytelechelic poly(ethylene oxide) (PEO) with stannous octoate as a catalyst.The polymers were an AB block copolymer, an ABA block copolymer, an (A)₂B star shaped copolymer and an (A)₂B(A)₂ copolymer, where A is a poly[3(S)‐sec‐butylmorpholine‐2,5‐dione] (PBMD) and B a poly(ethylene oxide) block. The molar ratio of BMD to PEO was varied to obtain copolymers with different weight fractions of PBMD blocks ranging from 59.8 to 96.7 wt.‐%. The crystallinity of the PEO phase in the copolymers decreases in the following order: AB > (A)₂B > ABA > (A)₂B(A)₂ . The static contact angle θ decreases with increasing PEO content in the block copolymers.